LOOKING FOR CUSTOMERS TO ACT AS REFERENCES

LOOKING FOR CUSTOMERS TO ACT AS REFERENCES

PostBy: PatrickAHS On: Mon Feb 23, 2009 5:59 pm

I need happy customers that are willing to show their Coal Gun to others.

I especially need references in the Southern NY and Northern PA area. Eldred, Olean, Franklinville, etc.

Thanks in advance.
User avatar
PatrickAHS
Member
 
Posts: 159
Joined: Wed Oct 01, 2008 10:12 am
Stove/Furnace Make: Alternate Heating Systems LLC


Re: LOOKING FOR CUSTOMERS TO ACT AS REFERENCES

PostBy: jhish On: Mon Feb 23, 2009 7:36 pm

I'd love to, but I'm too far South. I'm a half hour South of Allentown.
jhish
New Member
 
Posts: 15
Joined: Sat Feb 14, 2009 4:13 pm
Stove/Furnace Make: AHS - Coal Gun
Stove/Furnace Model: S-130

Re: LOOKING FOR CUSTOMERS TO ACT AS REFERENCES

PostBy: whistlenut On: Mon Feb 23, 2009 7:41 pm

I am available, in the 03301 area
User avatar
whistlenut
State of New Hampshire Moderator
 
Posts: 2739
Joined: Sat Mar 17, 2007 6:29 pm
Location: Central NH, Concord area
Stove/Furnace Make: AA130's/AA260's,AHS 130's-260
Stove/Furnace Model: GJ 600,EFM DF520-900 VWert 600

Re: LOOKING FOR CUSTOMERS TO ACT AS REFERENCES

PostBy: WNY On: Mon Feb 23, 2009 8:36 pm

I would if I had one! I am in that area. Looking for a Demo house? (hint, hint).
User avatar
WNY
Site Moderator
 
Posts: 5452
Joined: Mon Nov 14, 2005 9:40 am
Location: Cuba, NY
Stove/Furnace Make: Keystoker, LL & CoalTrol
Stove/Furnace Model: 90K, Hyfire I, VF3000 Soon

Re: LOOKING FOR CUSTOMERS TO ACT AS REFERENCES

PostBy: PatrickAHS On: Tue Feb 24, 2009 8:48 am

WNY wrote:I would if I had one! I am in that area. Looking for a Demo house? (hint, hint).


:lol:
User avatar
PatrickAHS
Member
 
Posts: 159
Joined: Wed Oct 01, 2008 10:12 am
Stove/Furnace Make: Alternate Heating Systems LLC

Re: LOOKING FOR CUSTOMERS TO ACT AS REFERENCES

PostBy: WNY On: Tue Feb 24, 2009 10:01 am

I want to switch to a boiler anyway..... :)
User avatar
WNY
Site Moderator
 
Posts: 5452
Joined: Mon Nov 14, 2005 9:40 am
Location: Cuba, NY
Stove/Furnace Make: Keystoker, LL & CoalTrol
Stove/Furnace Model: 90K, Hyfire I, VF3000 Soon

Re: LOOKING FOR CUSTOMERS TO ACT AS REFERENCES

PostBy: whistlenut On: Tue Feb 24, 2009 10:15 am

Perhaps you can have a try with the eco-friendly solar powered controls/ wind generator assisted, tidal water backup low fly ash models due out this summer. Snap in a few relays in the din rail and off you go!.....and then there are the folks with a 'coal chubby' for some 31 years. I thought any more than 4 hrs was a big problem.........
User avatar
whistlenut
State of New Hampshire Moderator
 
Posts: 2739
Joined: Sat Mar 17, 2007 6:29 pm
Location: Central NH, Concord area
Stove/Furnace Make: AA130's/AA260's,AHS 130's-260
Stove/Furnace Model: GJ 600,EFM DF520-900 VWert 600

Re: LOOKING FOR CUSTOMERS TO ACT AS REFERENCES

PostBy: furnacetechpandh On: Fri Feb 27, 2009 5:27 pm

Distributor for AHS

If anyone wants to see the coal gun in operation they can come to our showroom in dunmore p.a. 771 E. Drinker st.
You can also call me at 1-800-851-9460 to make an appointment.

Thanks
TOM RABEL OWNER OF FURNACE TECH PLUMBING AND HEATING
furnacetechpandh
New Member
 
Posts: 1
Joined: Fri Feb 27, 2009 5:09 pm
Stove/Furnace Make: ahs
Stove/Furnace Model: s130

Re: LOOKING FOR CUSTOMERS TO ACT AS REFERENCES

PostBy: PatrickAHS On: Fri Feb 27, 2009 5:58 pm

Thanks for the responses guys
User avatar
PatrickAHS
Member
 
Posts: 159
Joined: Wed Oct 01, 2008 10:12 am
Stove/Furnace Make: Alternate Heating Systems LLC

Re: LOOKING FOR CUSTOMERS TO ACT AS REFERENCES

PostBy: billnj On: Wed Mar 11, 2009 8:52 pm

I'm in Northern NJ, 07405. I'd be happy to show my boiler to your customers.
billnj
New Member
 
Posts: 11
Joined: Mon Mar 31, 2008 7:54 am
Location: Kinnelon New Jersey
Stove/Furnace Make: AHS-130

Re: LOOKING FOR CUSTOMERS TO ACT AS REFERENCES

PostBy: pelletsrevil On: Wed Mar 25, 2009 8:08 am

Overheard you talking to Jim Brown yesterday. I'm in Wayne County where a lot of people are getting rid of propane and going with something else. I could be your demo house in Wayne County. It's funny how I've looking into coal for 6 months and never heard of you until yesterday,you need some Wayne County exposure!
User avatar
pelletsrevil
New Member
 
Posts: 9
Joined: Fri Oct 03, 2008 7:17 am
Location: Lakeville,PA
Stove/Furnace Make: St Croix Afton Bay

Re: LOOKING FOR CUSTOMERS TO ACT AS REFERENCES

PostBy: ramien On: Thu Apr 23, 2009 10:52 pm

If you ever need some one here in S. Maine let me know, zip 04084. Jason M.
User avatar
ramien
New Member
 
Posts: 5
Joined: Sun Nov 09, 2008 3:45 pm
Stove/Furnace Make: AHS 130 coal only
Stove/Furnace Model: Slant Fin Boiler/oil fired

Re: LOOKING FOR CUSTOMERS TO ACT AS REFERENCES

PostBy: MacCoon On: Mon Sep 14, 2009 9:29 pm

Absolutely. I am located in Central New York Homer, 13077. 30 Minutes from Syracuse, 45 Minutes from Binghamton.

Featuring:
34 Cu Yd Coal Bin
Auger feed coal to hopper, two stage
S130, #41
Auger feed ash away from stoker, two stage
User avatar
MacCoon
New Member
 
Posts: 16
Joined: Mon Dec 22, 2008 10:39 am
Stove/Furnace Make: AHS
Stove/Furnace Model: S130

Re: LOOKING FOR CUSTOMERS TO ACT AS REFERENCES

PostBy: Poconoeagle On: Mon Sep 14, 2009 9:36 pm

pics!!! we love pics macCoon 8-)
User avatar
Poconoeagle
State of Pennsylvania Moderator
 
Posts: 6767
Joined: Sat Nov 08, 2008 8:26 pm
Location: Tobyhanna PA
Stove/Furnace Make: Buckwalter & Co. , EFM520
Stove/Furnace Model: No. 28 Glenwood 1880, Alaska

Re: LOOKING FOR CUSTOMERS TO ACT AS REFERENCES

PostBy: cArNaGe On: Tue Sep 15, 2009 1:53 am

Poconoeagle wrote:pics!!! we love pics macCoon 8-)



He posted last year.


AHS S130 Installation by MacCoon


And I thought you were going to change your name to CoalBlower
User avatar
cArNaGe
Member
 
Posts: 1024
Joined: Thu Dec 13, 2007 12:34 am
Location: Montrose, PA
Stove/Furnace Make: efm
Stove/Furnace Model: 520