Yes, sometimes we just have to let things go - the problem is I've only got two things I'm obsessed with 1) my coal stove and making it work better and 2) having clean windows on the bus. Thanks for your imput - I think I've done everything I can to maximinze the stove for this heating season so it's on to planning for next year. As for the windows they are always going to be there; there's no getting around that. Lisarberq wrote: (Us obsessive-compulsive perfectionist types have to just let go ....)
Love My Baro
- lowfog01
- Member
- Posts: 3889
- Joined: Sat. Dec. 20, 2008 8:33 am
- Location: Springfield, VA
- Hand Fed Coal Stove: Mark II & Mark I
- Coal Size/Type: nut/pea
I would check to see if there is a blockage or kink in the tubing or probe. Take it out of the screw hole and you should be able to see a reading just by blowing across the end of the tubing.lowfog01 wrote:After I got a pre-baro screw hole the size of the manometer probe and had zeroed the manometer upon inserting the probe I couldn't get a draft to register. ...... I’m open for any and all suggestions. Lisa
- lowfog01
- Member
- Posts: 3889
- Joined: Sat. Dec. 20, 2008 8:33 am
- Location: Springfield, VA
- Hand Fed Coal Stove: Mark II & Mark I
- Coal Size/Type: nut/pea
We checked on the tubing and it didnot have a block in it. Since the stove is working well at the the recommended .04 baro sitting we are not going to obsess over it. Maybe I'll fool with it more this weekend. Thanks for you suggestion. Lisa