Hi Everyone,
I just purchased a Harman sf-260 and was wondering if some one could explain what set the differential to the desired set point.(a350). (s350) 1 Set the off set to the desired set point. 2 set the differential to the desired set point.The controls are altogher the temp dial on the a 350 is easy enough, but the little dials not real clear. The a350 is the draft control ,the s 350 is the over heat stat to kick on the circulator pump. Thanks for any info. Joe
Need Help Setting Johnson Controls
- mcgills443
- Member
- Posts: 44
- Joined: Mon. Mar. 02, 2009 3:39 pm
- Location: Chateaugay, NY
- Stoker Coal Boiler: Van Wert 400
- Coal Size/Type: Rice,Buck
- Other Heating: Hot air oil furnance
- coaledsweat
- Site Moderator
- Posts: 13763
- Joined: Fri. Oct. 27, 2006 2:05 pm
- Location: Guilford, Connecticut
- Stoker Coal Boiler: Axeman Anderson 260M
- Coal Size/Type: Pea
Page 7.
**Broken Link(s) Removed**
**Broken Link(s) Removed**
- mcgills443
- Member
- Posts: 44
- Joined: Mon. Mar. 02, 2009 3:39 pm
- Location: Chateaugay, NY
- Stoker Coal Boiler: Van Wert 400
- Coal Size/Type: Rice,Buck
- Other Heating: Hot air oil furnance
Coaled sweat,
Thanks for the reply, I Figured out the setting. I got little a head of myself. Good day, Joe
Thanks for the reply, I Figured out the setting. I got little a head of myself. Good day, Joe
coaledsweat wrote:Page 7.
**Broken Link(s) Removed**
- coaledsweat
- Site Moderator
- Posts: 13763
- Joined: Fri. Oct. 27, 2006 2:05 pm
- Location: Guilford, Connecticut
- Stoker Coal Boiler: Axeman Anderson 260M
- Coal Size/Type: Pea
LOL, I read all that and without the control in front of me had no clue what it said. I can see why you had a moment.