Adding a coal-trol to a older LL Pocono

Adding a coal-trol to a older LL Pocono

PostBy: TdiDave On: Sat Apr 18, 2009 11:43 am

I picked up a used LL Pocono that is a few years old. I would like to add a coal-trol in place of the manual rheostat dials.
Two questions:
What model Coal-trol would i need? From my reading i think want the "Standard +" I have no power vent and im not hooking it to the HVAC system.

Also my stoker and combustion fan are wired together (see picture below) would i just seperate them out with there own plugs to hook up to the coal-trol ?
IMG_0584a.jpg
(332.86 KiB) Viewed 23 times
View: New PagePopup • Select:BBCode
[nepathumb]12468[/nepathumb]


Thanks
TdiDave
 
Hot Air Coal Stoker Stove: Leisure Line - Pocono
Coal Size/Type: Rice
Other Heating: Heat Pump
Stove/Furnace Make: Leisure Line
Stove/Furnace Model: Pocono

Re: Adding a coal-trol to a older LL Pocono

PostBy: ntp71 On: Sun Apr 19, 2009 11:13 am

Hey Dave,

Although I do not have a Coaltrol myself I have looked into the wiring of this product for a previous project.

The question you are asking can be found in the installation manual of the Coaltrol website.

The link I am providing is for the standard model.

http://www.automationcorrect.com/docume ... ll_Web.pdf

Neal
ntp71
 
Hand Fed Coal Boiler: Reading Foundry Water Heater
Hot Air Coal Stoker Stove: Old Mill Mini Stoker with Keystoker Feed System
Baseburners & Antiques: Caloric UltraMatic Coal-Gas Range

Re: Adding a coal-trol to a older LL Pocono

PostBy: WNY On: Sun Apr 19, 2009 7:14 pm

Probalby any would work, but yes, you would have to separate the wiring from the stoker/blower so it can control separately.

Look on the Coaltrol site, all the wiring, manuals, etc.. are online.
WNY
 
Hot Air Coal Stoker Stove: Keystoker 90K, Leisure Line Hyfire I
Coal Size/Type: Rice
Stove/Furnace Make: Keystoker, LL & CoalTrol
Stove/Furnace Model: 90K, Hyfire I, VF3000 Soon

Re: Adding a coal-trol to a older LL Pocono

PostBy: pvolcko On: Wed Apr 22, 2009 1:17 pm

The Coal-trol Digital Standard or Standard+ would be appropriate. Standard+ gives you the Energy Star thermostat (4 weekday and 4 weekend setpoints, vacation hold). Standard has all the same features and capabilities except only two setpoints and no permanent/vacation hold.

We sell a plug kit for the CM2-4 that you can use to get your motors wired up for use with the Coal-trol. We highly recommend separating the combustion and stoker motors, though the Coal-trol can be put into "triburn" mode to work with a one plug stoker/combustion installation.

Give us a call at 315-299-3589 if you have any questions or when you are ready to buy. You can also order online at our website, http://www.coaltroldigital.com.
pvolcko