problem on initial start up of Coal-Trol

PostBy: Laker On: Tue Dec 26, 2006 1:22 pm

The past three days I have noticed that the feed rate has been in the 80s and 90s (usually 99) and has overheated the house. The max rate is set to 40. What do I do to correct it? The stove is a Pocono.

Stove/Furnace Make: Leisure Line
Stove/Furnace Model: Pocono

PostBy: pvolcko On: Tue Dec 26, 2006 1:52 pm


Do you have the HLF setting set above 0? If so, please set it back to 0 and give us a call. 315-299-3589.

PostBy: Paul Waelder On: Sun Jan 28, 2007 1:41 pm

are the coal-trol's working ? no news seems to be good news ?
Paul Waelder
Stove/Furnace Make: LL-pio./Key.-90/Alk.-hearth
Stove/Furnace Model: home made w/ LL40k stoker

PostBy: George On: Sun Jan 28, 2007 6:50 pm

This is my first year burning coal:
I have a new Alaska kast console 111 with a direct vent I installed in November and added the Coal-trol last Saturday. It is running flawlessly. The initial settings for minimium and max feed are working well. I have never had to run my stove flat out yet.
The bride is very happy now she does not have to guess where to set the reostat any more. The temperature is +/- 1 deg. of set point. :) :) . I like how the convection blower speeds up as the heat output increases. Would highly recommend the Coal-trol to anyone. If Neil could only get it to make the coffee :lol: :lol:
Hot Air Coal Stoker Stove: Alaska Cast Consol 3 w/ coaltrol

PostBy: Paul On: Wed Jan 31, 2007 4:25 pm

Still believe its the The Cats Ass!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Stove/Furnace Make: Alaska
Stove/Furnace Model: Channing {2}