Saturday Coffee, Memorial Weekend

SMITTY · Post by **SMITTY** » Sun. Jan. 09, 2011 11:25 pm

Man was that coffee old! It's got fur on it!

AA130FIREMAN · Post by **AA130FIREMAN** » Sun. Jan. 09, 2011 11:30 pm

SMITTY wrote:Man was that coffee old! It's got fur on it!

May be part of the fermentation process

cokehead · Post by **cokehead** » Sun. Jan. 09, 2011 11:35 pm

Old cyber coffee aint bad. Just boil it a bit if you have doubts.

SMITTY · Post by **SMITTY** » Sun. Jan. 09, 2011 11:37 pm

I'm gonna see what distilling it does ....

cokehead · Post by **cokehead** » Sun. Jan. 09, 2011 11:55 pm

AA130FIREMAN said,
"I would consider putting a tempering valve on that if there is not one there already."

I think that is very good advise. It should be easy to do with pex. Anything I repair or do new is pex from this weekend on.

I do have a 30 psi relief on the boiler. I tested the boiler to about 50 psi and it is rated about 90 years ago for 125 psi working pressure.

You could run a steam engine off it after testing it of course.

I have a 150 pressure relief on the indirect. It will blow off on high temp as well. I might be a cracked pot but I'm not insane according to me.

I just checked the temp.....150 and climbing. The love birds are still on the couch. I warned them. There is supposed to be a tempering system in the shower valve but I never tested it.

CapeCoaler · Post by **CapeCoaler** » Sun. Jan. 09, 2011 11:58 pm

Add Vodka to kill anything growing...
And you will have Kahlua...