swg-4-power venter for hyfire II

I use 6" stove pipe on my hyfire II. The conection on my power venter is only 4". Is there a proper connection for this if I want to change over to double wall pipe? I cannot seem to find anything.
Even when you use single wall the connection isn't perfect. I use simpson pipe now but would change if another manufacturer had something.
Thanks for the help.

If you bought the power vent from LLS there is a 4-6 reducer that comes with the kit. If you would someday change over to double wall, they make a connector to go from single to double.
Jerry

This was the stove that I bought in massachusetts last year from csm and had some trouble with them on a couple of issues. Your help with those issues was greatly appreciated, but no the power venter they sold me did not have a reducer with it.
If there is a way I could purchase it now I would be more than happy to give you a call.
Thank you for all your help in the past.
Richard

When I went to CSM (Monson, MA) last year they were pushing Keystoker, Alaska. Not one LL in house and did not see any Keys or Alaska's with Coal trols. I did'nt feel they fairly represented LL as an dealer, suggesting poor warranty service, so purchased mine this year from a new LL dealer near Bristol, CT, great guy, really wants to please.

Hi Richard,
You can call Karen at the store(570.788.3330) and she would help you uot with a 4/6 reducer.
Jer

Sorry I must be a bit dense. I am buying the Hyfire II and swg 4. Now I read it is back vented only. Does that go into a chimney, how do I connect the direct vent option? If I have to make a chimney bend to go up what is the wall clearance required and how much will the stove stick out into the room?

They don't call me coalnewbie without good reason.