Burner plate help needed

I need some help. I need to find where I can buy burner plates. I noticed the other day Mine are cracked and some pieces are missing. I have a efm boiler. I found some numbers on the plates. G809 R Any help would be great. Thanks

efm Dealers who sell direct

You can buy them from any dealer. Use the above link if you like.

Thanks I'll give them a call.

You can also arrange to pay any dealer and we can ship direct to your house.

Well if I can arrange them to be shipped to my house that would be great. I work long hours during the day and don't have a lot of time to run around. It seams like everything is closed by the time I get home.

I'm not sure but I would like to replace all of these as you can see in the pictures one is broke so I figure I'll change them all now and be good for the winter.



The numbers on it are G 809 R and there numbered in order 1,2,3,1,2,3.

There's only one screw on them to hold them in place. I don't know if there is a nut on the bottom or not.

If you want send me a price on the plates and the screws and shipping to Mertztown P.A. And let me know how to pay for them.

Thanks
Tim
tzhauling@live.com

R.D. Fuel & Heating New Tripoli, PA (610) 435-3520

Call them and they'll have us ship them to you.

Shipping might be $10 or a little more,,,,cheaper to pick them up, but if you can't.......

I see the one next to it looks like it's cracked.

You should order a set of 6 burner plates with screws and nuts and the 3 rope gaskets. We know the numbers if RD fuel calls.

Your worm appears to be worn too.

Sorry I haven't been on in a while. To much overtime, but I'm not complaining about it. I need it. I'll call them tomm. on my lunch break.

I'm going to order 6 burner plates the nuts and bolts and the 3 rope gaskets.

The auger is worn but but it looks worst in the picture then what it is. I'm hoping to get another season or 2 out of it.


Thank you for your help.
Tim & Melinda

OK I had chance to call and order the plates. Does anyone have manual on changing them? Pictures are worth a thousand words to me. I've never done this before. It looks like a simple task but with my luck it won't be.

Thanks for any help.

Pictorial: Changing the burner plates

Pictorial: The Burner Pot Assembly w/part numbers

Between those two posts, you can do it.

Well it took awhile but I got it done. I probable did it the hard way, but it's done. I started it up and wow The air feed was way off. The new plates really make a different s.


And this is what the burner plates looked.



Thanks for your help
Tim

Looks good.