My Econo is up and running!!

As I said I am a newbie with these types of stoves. Yes it is a power vent, the motor is mounted outside on this power vent. And yes the damper has been checked by the tech three different times and it is running perfect. No I don't run the stove open, only once in a great while do I up the temp on the thermostat a couple of degrees. I tried a bag of blaschak and noticed no real difference. One difference I noticed though is that I did not get the cluster of ash in the pan. Part of the trouble is the fan does not run at full speed. When I get a hot fire the fan will run on high for a short period of time and slows down. At that point I put the fan on manual via the thermostat until the fire dies down some. Then I will switch it back over auto.

here are the setting on my therm.
deg F
min 4 feed
max 25 feed
cft 0 convection fan setting
ign n no ignition
n 72 night temp setting
d 72 day temp setting

I have the TS2 con trol

think your max of 25 may be to low to be getting much heat out of stove i have my min@5 and max@52.