How to run one burner on Hyfire II

My husband just installed our Hyfire II and we love it. Our question is how to run just one burner instead of both at the same time. We don't need both running right now. Do we just unplug the feed and blower for one burner so that it doesn't run, or is there another way? Don't see anything in the instructions addressing this. Thanks!

Nope, just unplug the stoker and blower for the side not being used.

You can then shovel some hot coals from one side to the other to light the other burner, then plug it in.

I made up 2 switch boxes (one for combustion, one for stokers) and then I can control them separately without unplugging.

Info.
Leisure Line Hyfire I

Dave, thanks for your help and for the link. Seems a simple solution.

any other questions, just ask...

Oh, another question, when shutting down one side, what is the best or easiest method, i.e., unplug stoker and let the coal burn out or unplug the combustion blower and just let the coal go out from lack of air flow, or does it even matter?

Thanks,
Connie

Just unplug the combustion blower and stoker, you dont want to waste coal if you leave the stoker motor on. It usually shuts down pretty fast without any air 5-20+ mins. there still could be warm coal underneath, so don't touch it for a while. (if you are cleaning it out or something)

Here's the plug boxes I made..
Leisure Line Hyfire I