hyfire II is cool

The manomometer that Gambler gave a link to is not the correct one foe coal. That one is a #27, for coal it needs to be the #25. The 27 just doesn't give a fine enough reading.

Thanks for the help and suggestions. We turned the max feed rate up to 60 today and it was 80+ in the house in 1 hour. Thanks again , Mason

Freddy wrote:The manomometer that Gambler gave a link to is not the correct one foe coal. That one is a #27, for coal it needs to be the #25. The 27 just doesn't give a fine enough reading.

Sorry, I didn't even read the link. I just saw it in the for sale section.

Freddy wrote:The manomometer that Gambler gave a link to is not the correct one foe coal. That one is a #27, for coal it needs to be the #25. The 27 just doesn't give a fine enough reading.

Yes it can be used for coal all you will be reading is the 4 or 5 lines between 0 |||||| .1
each line is .01 .02 .03 .04 .05 I use a # 26 mark II w/ Blue dye 0 to 7 not hard to read or use

ncountry, from the looks of your last post problem is solved, let us know if that is not the case. Thanks everyone for your replies!

Matthaus....We're there for ya!
We know you are busy learning the ropes.....

WNY wrote:Matthaus....We're there for ya!
We know you are busy learning the ropes.....

Thanks Dave, at least we now have worldship up and running so now we can get the packages out!