Yikes! The alaska wouldn't like that much.Wood'nCoal wrote:Umm....deepest it's been since I have been here was 2 1/2 feet.
Cold Front Rolling in
- coalkirk
- Member
- Posts: 5185
- Joined: Wed. May. 17, 2006 8:12 pm
- Location: Forest Hill MD
- Stoker Coal Boiler: 1981 EFM DF520 retired
- Hand Fed Coal Stove: Jotul 507 on standby
- Coal Size/Type: Lehigh anthracite/rice coal
- PC 12-47E
- Member
- Posts: 772
- Joined: Tue. Nov. 25, 2008 11:45 am
- Location: Mid Coast, Maine
- Hand Fed Coal Stove: Estate Heatrola, Jotul 507
Water is not a problem unless the tide rolls in 25+ feet.Wood'nCoal wrote:Umm....deepest it's been since I have been here was 2 1/2 feet.
The old saying is : you can throw a cat through the cracks in the walls.
Circa 1790 hand hewn Post and Beam.... we have the (adze SP??) axe that shaped the frames.
- LsFarm
- Member
- Posts: 7383
- Joined: Sun. Nov. 20, 2005 8:02 pm
- Location: Michigan
- Stoker Coal Boiler: Axeman Anderson 260
- Hand Fed Coal Boiler: Self-built 'Big Bertha' SS Boiler
- Baseburners & Antiques: Keystone 11, Art Garland
I saw on weather.com that the high at home in Michgan was 12* today, with winds 25-35mph.. that's brutal... and it's going to get colder.
I was in Boston this afternoon, when a snow squall blew in,, visibilty went from 10miles+ to 600' in a few seconds.. the wind shifted direction, different runways had to be used.. a real furball for awhile.. Had to taxi back in and deice the plane..
Greg L
I was in Boston this afternoon, when a snow squall blew in,, visibilty went from 10miles+ to 600' in a few seconds.. the wind shifted direction, different runways had to be used.. a real furball for awhile.. Had to taxi back in and deice the plane..
Greg L
- CoalHeat
- Member
- Posts: 8862
- Joined: Sat. Feb. 10, 2007 9:48 pm
- Location: Stillwater, New Jersey
- Stoker Coal Boiler: 1959 EFM 350
- Hand Fed Coal Stove: Harman Magnafire Mark I
- Baseburners & Antiques: Sears Signal Oak 15 & Andes Kitchen Range
- Coal Size/Type: Rice and Chestnut
- Other Heating: Fisher Fireplace Insert
Looks like you might have the oldest place. Having the ax is cool, there's a name for that type, can't remember it. This place is post & beam as well.Circa 1790 hand hewn Post and Beam.... we have the (adze SP??) axe that shaped the frames.
11 degrees here, a tad chilly.
- whistlenut
- Member
- Posts: 3548
- Joined: Sat. Mar. 17, 2007 6:29 pm
- Location: Central NH, Concord area
- Stoker Coal Boiler: AA130's,260's, AHS130&260's,EFM900,GJ & V-Wert
- Hand Fed Coal Boiler: Franks,Itasca 415,Jensen, NYer 130,Van Wert
- Hot Air Coal Stoker Furnace: Alaska, EFM, Keystoker, Yellow Flame
- Hot Air Coal Stoker Stove: Alaska, Keystoker-2,Leisure Line
- Hand Fed Coal Stove: Alaska, Gibraltar, Keystone,Vc Vigilant 2
- Hand Fed Coal Furnace: Ford, Jensen, NYer, Van Wert,
- Baseburners & Antiques: Glenwoods
- Coal Size/Type: Barley, Buck, Rice ,Nut, Stove
- Other Heating: Oil HWBB
I said the other day we would soon pay for all the pleasant days we've had. It's 4 degrees here, wind is about 30 mph, and not fun to be outside. Sure enjoyed the 'thaw', but how quickly the reality check whacks you up side the head.
Good day to check in on some older folks to see that they are warm and doing OK, and to make sure your own homes don't suffer from the freeze-up dilemma.
Chilly weekend, so stay bundled up and be safe!
Good day to check in on some older folks to see that they are warm and doing OK, and to make sure your own homes don't suffer from the freeze-up dilemma.
Chilly weekend, so stay bundled up and be safe!
- Duengeon master
- Member
- Posts: 1958
- Joined: Sun. May. 06, 2007 7:32 am
- Location: Penndel, Pa.
- Hand Fed Coal Stove: Harmon Mark III
- Coal Size/Type: Anthracite pea and nut mix. Bituminous lump
Did anyone get caught in that surprise snow in lower N.Y. state and Connecticut yesterday? I-684 was a demolition derby. I saw no less than 15 accidents between White Plains and Brewster, N.Y. I thoroughly enjoyed my trip to Mercedes Benz of Danbury yesterday. Walking out behind the dealership, I slipped in a rut on frozen mud covered by snow I heard a snap felt a pop and down I went fracturing my Fibula down by the ankle. So now I am out of action for the next 6 or more weeks. If it had to happen, at least this is our slowest time of year.
- Poconoeagle
- Member
- Posts: 6397
- Joined: Sat. Nov. 08, 2008 7:26 pm
- Location: Tobyhanna PA
man sorry to hear that! hope it heals fast.
1 degree here gust to 30 brought wind chil to -15. to think I walked the property a bit the other day @54degrees picking up broken limbs and twigs for the lawnmower.... thinking...that darn al gore........... and today!!! he's still wrong
1 degree here gust to 30 brought wind chil to -15. to think I walked the property a bit the other day @54degrees picking up broken limbs and twigs for the lawnmower.... thinking...that darn al gore........... and today!!! he's still wrong
-
- Member
- Posts: 2705
- Joined: Fri. Jan. 26, 2007 9:55 pm
- Location: Birdsboro PA.
- Stoker Coal Boiler: EFM 350
- Hot Air Coal Stoker Furnace: reading allegheny stoker
- Hot Air Coal Stoker Stove: alaska kodiak stoker 1986. 1987 triburner, 1987 crane diamond
- Coal Size/Type: rice
just got back from superior with a truck load of coal........it's freezing out there
- stovepipemike
- Member
- Posts: 1225
- Joined: Sun. Jun. 15, 2008 11:53 am
- Location: Morgantown ,Penna
linc, Did you get it dry? No matter what it seems to be damp at the least .It will not take too long before you will have a giant black ice cube.Got it out yet? Mike
- Duengeon master
- Member
- Posts: 1958
- Joined: Sun. May. 06, 2007 7:32 am
- Location: Penndel, Pa.
- Hand Fed Coal Stove: Harmon Mark III
- Coal Size/Type: Anthracite pea and nut mix. Bituminous lump
If you're cold bring some of those black ice cicles over and warm up.lincolnmania wrote:just got back from superior with a truck load of coal........it's freezing out there
- no74falcon
- Member
- Posts: 142
- Joined: Fri. Jan. 01, 2010 9:39 pm
- Location: Erieville, N.Y.
- Hot Air Coal Stoker Stove: 2) Leisure Line Pioneers, 1) Keystoker
- Hand Fed Coal Furnace: 1) Hitzer 82FA, 1) Newmac WG100
I took these at 5:15 this morning. The digital is downstairs where the Hitzer is, the Sunbeam is upstairs, behind where the Hitzer is pointed. I loaded the stove with wood and set my "Dial Heat" at halfway at around 10:30 last night. Damn thing works great!
Attachments
- Freddy
- Member
- Posts: 7301
- Joined: Fri. Apr. 11, 2008 2:54 pm
- Location: Orrington, Maine
- Stoker Coal Boiler: Axeman Anderson 130 (pea)
- Coal Size/Type: Pea size, Superior, deep mined
Oh no! Sorry to hear. Geepers!Duengeon master wrote:heard a snap felt a pop and down I went
Colder than a well diggers knee here. The wind is merciless and the temps just keep going down down down. The Axeman is happily jogging along "Ahhh, finally something to do!"
- SMITTY
- Member
- Posts: 12526
- Joined: Sun. Dec. 11, 2005 12:43 pm
- Location: West-Central Mass
- Stoker Coal Boiler: EFM 520 Highboy
- Coal Size/Type: Rice / Blaschak anthracite
- Other Heating: Oil fired Burnham boiler
Naw, just some Polish Spiritus. 96% alcohol content. Keeps you REAL WARM on those winter morns. If you drink it too fast, you'll go blind!! Don't ask how I know that ....whistlenut wrote:....and any other form of anti-freeze solution. Smitty will chime in with some Jamaican 181 proof I'll bet.
Yeah, I think Wood n coal wins the water contest. I've only had 9" down the basement, although normally there is a river that flows right under the stove when it rains. Now drafts on the other hand .... I think I might take the gold on that contest!
We lost power for about 5 hours yesterday due to the wind. Fired up the Yamaha & finally broke it in. Did a great job -- quiet as a mouse, & no flickering lights! What sucks about it is the GFCI outlet ... I can't power the barn with it, due to all the wiring code violations. Kept tripping the damn thing the instant I plugged in. The old china one didn't have any problems running the barn. That GFCI will be gone by the next storm, mark my words!
Hit a high of 14° yesterday, wind gusts up to 26 mph ... and that is waaaaay below the tree line & a steep hill. We're pretty sheltered from wind here, so if it gusts up in the 20's or 30's, it's pretty damn windy!
Here's a pic of the current conditions:
- Duengeon master
- Member
- Posts: 1958
- Joined: Sun. May. 06, 2007 7:32 am
- Location: Penndel, Pa.
- Hand Fed Coal Stove: Harmon Mark III
- Coal Size/Type: Anthracite pea and nut mix. Bituminous lump
Naw, just some Polish Spiritus. 96% alcohol content. Keeps you REAL WARM on those winter morns. If you drink it too fast, you'll go blind!! Don't ask how I know that ....whistlenut wrote:....and any other form of anti-freeze solution. Smitty will chime in with some Jamaican 181 proof I'll bet.
Yeah, I think Wood n coal wins the water contest. I've only had 9" down the basement, although normally there is a river that flows right under the stove when it rains. Now drafts on the other hand .... I think I might take the gold on that contest!
We lost power for about 5 hours yesterday due to the wind. Fired up the Yamaha & finally broke it in. Did a great job -- quiet as a mouse, & no flickering lights! What sucks about it is the GFCI outlet ... I can't power the barn with it, due to all the wiring code violations. Kept tripping the damn thing the instant I plugged in. The old china one didn't have any problems running the barn. That GFCI will be gone by the next storm, mark my words!
Hit a high of 14° yesterday, wind gusts up to 26 mph ... and that is waaaaay below the tree line & a steep hill. We're pretty sheltered from wind here, so if it gusts up in the 20's or 30's, it's pretty damn windy!
Here's a pic of the current conditions:
I can go for some of that Jamaican 181 proof to go with the Percosett's they gave me! Also throw in a Jamaican hottie to go with it.