How Far Open/ Closed is the Restrictor Plate On Your Harman Magnum Combustion Motor

How Far Open/ Closed is the Restrictor Plate On Your Harman Magnum Combustion Motor

PostBy: gtx71 On: Mon. Feb. 19, 2007 10:03 pm

i have the above stoker and was wondering what other people are seeing.
how far open/ closed is the restricter plate on the combsution fan.

i set it up to equal the stack draft and I just about closed off the inlet to combustion fan.

tony b.
gtx71
 
Stove/Furnace Make: HARMAN, HARMAN
Stove/Furnace Model: MAGNUM, MARK111


Re: How Far Open/ Closed is the Restrictor Plate On Your Harman Magnum Combustion Motor

PostBy: lime4x4 On: Fri. Feb. 23, 2007 9:11 pm

did u measure your draft before or after the barometric dampner?
When mine was setup they measured the draft before the baro and my plate was almost closed. But if u read the directions your suppose to take the reading after the baro. I correctly have my plate almost fully open and it works well that way.
lime4x4
 

Re: How Far Open/ Closed is the Restrictor Plate On Your Harman Magnum Combustion Motor

PostBy: gtx71 On: Sun. Feb. 25, 2007 11:45 am

i will re-check it
thanks

tony b.
gtx71
 
Stove/Furnace Make: HARMAN, HARMAN
Stove/Furnace Model: MAGNUM, MARK111