EFM 350

Rob R. · By: **Rob R.** On: Mon Aug 15, 2011 6:22 am

Does that mean you are still burning??

Wood'nCoal · By: **Wood'nCoal** On: Mon Aug 15, 2011 9:26 pm

Everything's fine.

: (119.42 KiB) Viewed 17 times; View: New Page • Popup • Select:BBCode; [nepathumb]28598[/nepathumb]

: (171.84 KiB) Viewed 28 times; View: New Page • Popup • Select:BBCode; There's a fire in there somewhere...; [nepathumb]28599[/nepathumb]

: (75.45 KiB) Viewed 27 times; View: New Page • Popup • Select:BBCode; [nepathumb]28600[/nepathumb]

coal berner · By: **coal berner** On: Tue Aug 16, 2011 12:08 am

Wood'nCoal wrote:Everything's fine.
DSCN0657.JPG
DSCN0665.JPG
DSCN0661.JPG

No everything is not Fine to much air did you adjust your air when you adjusted the feed rate to much air with that coal
can burn grates up the flame is tight and narrow telling to much air being used should be spread out more wider flame

Wood'nCoal · By: **Wood'nCoal** On: Tue Aug 16, 2011 9:15 am

The stoker had just started running when I took that photo.

coal berner · By: **coal berner** On: Wed Aug 17, 2011 11:55 am

Wood'nCoal wrote:The stoker had just started running when I took that photo.

OK but you still have to much air that's why you have all the clinkers forming your ash pile is to high in and on the pot & ring

Wood'nCoal · By: **Wood'nCoal** On: Wed Aug 17, 2011 9:26 pm

Air is back from 4 1/2 to 4.

Wood'nCoal · By: **Wood'nCoal** On: Thu Aug 18, 2011 9:16 pm

I cleaned my glasses, the air was set at 6 1/2, now it's at 5. :oops:

coal berner · By: **coal berner** On: Fri Aug 19, 2011 1:12 am

Wood'nCoal wrote:I cleaned my glasses, the air was set at 6 1/2, now it's at 5.

told you you had it to high can see from the ash pics someday you will learn to listen try 4 air with your feed at 2 teeth

coal berner · By: **coal berner** On: Fri Aug 19, 2011 1:12 am

Wood'nCoal wrote:I cleaned my glasses, the air was set at 6 1/2, now it's at 5.

told you you had it to high can see from the ash pics someday you will learn to listen try 4 air with your feed at 2 teeth

Wood'nCoal · By: **Wood'nCoal** On: Fri Aug 19, 2011 8:35 am

I must not have looked at the dial on the air setting correctly, it's a little hard to see given the close quarters.

VigIIPeaBurner · By: **VigIIPeaBurner** On: Fri Aug 19, 2011 9:44 am

Wood'nCoal wrote:I cleaned my glasses, the air was set at 6 1/2, now it's at 5.

Glasses? What glasses? W'nC, just face up to the fact that your arms are getting too short ... is it a 4 (FOUR) or is it a 6 (SIX)? :eek2:

Time for some fashonable W-Mart reading glasses. :funny:

009to090 · By: **009to090** On: Fri Aug 19, 2011 9:08 pm

VigIIPeaBurner wrote:Time for some fashonable W-Mart reading glasses.[/list]

My wife just had to go get a pair of those. She's amazed at what she can read now. :shock:

Wood'nCoal · By: **Wood'nCoal** On: Fri Aug 19, 2011 10:56 pm

Time for some fashonable W-Mart reading glasses.

Unfortunately I'm already wearing corrective glasses, but I'm overdue for a visit to the opthamologist. :mad:

coal berner · By: **coal berner** On: Sun Aug 21, 2011 2:49 am

Wood'nCoal wrote:
Time for some fashonable W-Mart reading glasses.

Unfortunately I'm already wearing corrective glasses, but I'm overdue for a visit to the opthamologist.

Don't forget to see a shrink while you at it see if they can figure out whats wrong with you

EFM 350

Re: EFM 350

Re: EFM 350

Re: EFM 350

Re: EFM 350

Re: EFM 350

Re: EFM 350

Re: EFM 350

Re: EFM 350

Re: EFM 350

Re: EFM 350

Re: EFM 350

Re: EFM 350

Re: EFM 350

Re: EFM 350

Re: EFM 350