Baro question?

Baro question?

PostBy: smith10210 On: Fri Dec 10, 2010 7:50 pm

Just wondering if i should move it up higher away from the stove and elbow its 12" from the top of the stove to the weight on the baro. I was reading it should be at least 12" but is that measuring from the top of the stove to the bottom of baro? that would make mine about 9".
Attachments
IMG_5119.JPG
(66.05 KiB) Viewed 10 times
View: New PagePopup • Select:BBCode
[nepathumb]23784[/nepathumb]
smith10210
 
Stove/Furnace Make: Hitzer
Stove/Furnace Model: 50-93

Re: Baro question?

PostBy: WNY On: Fri Dec 10, 2010 8:13 pm

Usually, 12-18" from stove, if you search on the BARO LOCATION on here, there are a lot of good threads.

If you can get a bit higher, wouldn't hurt, but if its working, you can leave it a lone.

Also, just check Field Controls Website for installation...

http://www.fieldcontrols.com/pdfs/DC01575700.pdf
WNY
 
Hot Air Coal Stoker Stove: Keystoker 90K, Leisure Line Hyfire I
Coal Size/Type: Rice
Stove/Furnace Make: Keystoker, LL & CoalTrol
Stove/Furnace Model: 90K, Hyfire I, VF3000 Soon

Visit Leisure Line Stove