CT Meet and Greet ?

CT Meet and Greet ?

PostBy: Uglysquirrel On: Fri Dec 17, 2010 10:53 pm

Was thinking that a meet & greet maybe at a local restaurant central to everyone would be nice. Was thinking maybe something like the Glastonbury Betuccci's on a no snow Saturday at noon or so in the middle of January? They have free salad and bread/oil and if you buy pizza's the cost per head is not a killer unless we start slamming down beers that I can't do because I need to drive home. The Hartford area seems good for the guys in New London/Groton by going up 9 or 2 and for the guys in Torrington/Enfield/Hebron. Don't think we hear a lot from any folks in Fairfield County.

Other ideas welcome.

Ugly
Uglysquirrel
 
Stove/Furnace Model: Pocono

Re: CT Meet and Greet ?

PostBy: EasyRay On: Sat Dec 18, 2010 12:50 pm

Sounds good to me. Just name the place,date, and time. Any place middle state is good for me.
EasyRay
 
Hand Fed Coal Stove: Harman TLC 2000
Coal Size/Type: Pea,Nut or Stove

Re: CT Meet and Greet ?

PostBy: cokehead On: Sat Dec 18, 2010 6:11 pm

I'd be willing if I don't have to work. I won't know till the Friday before. My wife works every other Saturday and we are a one car family these days which is another complicating factor. Set a date and let the chips fall where they may.
cokehead
 
Stove/Furnace Make: Locke, Godin, Tarm in da works
Stove/Furnace Model: Warm Morning 617-A, 3721, 502


Re: CT Meet and Greet ?

PostBy: Uglysquirrel On: Sat Dec 18, 2010 7:55 pm

Would it be too much to change the location to a Hartford area HOOTERS?
Uglysquirrel
 
Stove/Furnace Model: Pocono

Re: CT Meet and Greet ?

PostBy: Uglysquirrel On: Sat Dec 18, 2010 8:36 pm

Hello Ms. Hooter, yes, I'd like a reservation for ahhhh...30 coalburners...and ah.... please reserve CINDY for our tables.

Ugly
Uglysquirrel
 
Stove/Furnace Model: Pocono

Re: CT Meet and Greet ?

PostBy: samhill On: Sat Dec 18, 2010 8:45 pm

Thirty coalburners, I think you`ll have to get Ash ly to help her.
samhill
 
Hot Air Coal Stoker Furnace: keystoker 160
Hand Fed Coal Stove: hitzer 75 in garage
Stove/Furnace Make: keystoker/hitzer
Stove/Furnace Model: koker 160/ hitzer 75

Re: CT Meet and Greet ?

PostBy: jim d On: Sat Dec 18, 2010 10:51 pm

hi ug if your interested i will run the trailer w/ the coal jack boiler in it to give a demo to you fine connectonions when you decide on the time date & place let me know if your interested thanks jim
jim d
 
Stove/Furnace Make: alaska//coaljck
Stove/Furnace Model: liberty// cj3

Re: CT Meet and Greet ?

PostBy: Uglysquirrel On: Sun Dec 19, 2010 5:56 pm

Jim, thanks for the offer,I'm sure Cindy and Ashley already know we are hot.

After talking to my War Dept, I'm thinking we could throw out the date of Sat January 15th 12 noon, snow date the Saturday after, Jan 22nd. There were some communications regarding the wife issues with Hooters, so if there is no problem we can stick with the Betucci's in Glastonbury, it's a 3-4 minute ride from I-91 over the river via Rt 3 . Easy on and off, I'll give directions later.

I would like to propose that if anyone has a cool pizza or other joint somewhere in the Hartford area close to I-91 (and without girls in hot pantyhose) we can do that, no prob.

Looking forward to a good time meeting all of you, the mass boston guys had a good time with their greet several weeks ago, neva know, maybe some coalies from Western Mass may drop down, I'm sure that is fine with everyone.

All suggestions to make this a a great time will be considered.

Thanks

Ugly
Uglysquirrel
 
Stove/Furnace Model: Pocono

Re: CT Meet and Greet ?

PostBy: cokehead On: Sun Dec 19, 2010 6:08 pm

Don't forget RI. The states are small around here.
cokehead
 
Stove/Furnace Make: Locke, Godin, Tarm in da works
Stove/Furnace Model: Warm Morning 617-A, 3721, 502

Re: CT Meet and Greet ?

PostBy: Uglysquirrel On: Sun Dec 19, 2010 7:42 pm

Hummmm, I did not think of that, Coke, you're pretty smart.

What is that phase "Smart like your father, you big dope"
Uglysquirrel
 
Stove/Furnace Model: Pocono

Re: CT Meet and Greet ?

PostBy: coaledsweat On: Sun Dec 19, 2010 11:00 pm

Sounds like a plan.
coaledsweat
 
Stoker Coal Boiler: Axeman Anderson 260M
Coal Size/Type: Pea

Re: CT Meet and Greet ?

PostBy: Uglysquirrel On: Mon Dec 20, 2010 8:42 am

Now I have to make a list, super!
Uglysquirrel
 
Stove/Furnace Model: Pocono

Re: CT Meet and Greet ?

PostBy: EasyRay On: Mon Dec 20, 2010 11:56 am

Already checked off on my calendar. Put me on the list.
EasyRay
 
Hand Fed Coal Stove: Harman TLC 2000
Coal Size/Type: Pea,Nut or Stove

Re: CT Meet and Greet ?

PostBy: spiker On: Mon Dec 20, 2010 4:46 pm

RI checking in here, and interested. Cokehead, I can drive if you need a ride. Definite potential for a carpool form SE CT.
spiker
 
Stove/Furnace Make: Salvo
Stove/Furnace Model: Citation

Re: CT Meet and Greet ?

PostBy: cokehead On: Mon Dec 20, 2010 9:25 pm

spiker wrote:RI checking in here, and interested. Cokehead, I can drive if you need a ride. Definite potential for a carpool form SE CT.
If my wife is workin and I'm not,I might take you up on that. Who's the designated driver? Thankyou Spiker. :)
cokehead
 
Stove/Furnace Make: Locke, Godin, Tarm in da works
Stove/Furnace Model: Warm Morning 617-A, 3721, 502