Pot of Water on the Stove

 
User avatar
Adamiscold
Member
Posts: 1116
Joined: Fri. Feb. 29, 2008 7:09 am
Location: Winchendon,Ma

Post by Adamiscold » Thu. Dec. 23, 2010 8:56 am

What are the concerns with having a pot of water on your stove?

If the bottom of the pot is wet and placed on the stove or water is spilled while filling the pot on the stove will a little water hurt the stove? Would using hot water compared to cold water really make much of a difference if the surface of the stove is 400*+?

Can you have too big of a pot on your stove? Is it better to have a larger pot then to have a smaller pot run out of water?

Does the pot suck away some of the temperature from the stove?

Is there any other issues that one should be concerned about?


 
User avatar
freetown fred
Member
Posts: 30298
Joined: Thu. Dec. 31, 2009 12:33 pm
Location: Freetown,NY 13803
Hand Fed Coal Stove: HITZER 50-93
Coal Size/Type: BLASCHAK Nut

Post by freetown fred » Thu. Dec. 23, 2010 10:17 am

Dry the pot before placing on stove & put a divit under it--pay attention when filling pot :shock: ---don't let it run out----NO--NO--- ;)
Last edited by freetown fred on Thu. Dec. 23, 2010 10:21 am, edited 2 times in total.

 
User avatar
I'm On Fire
Member
Posts: 3918
Joined: Thu. Jun. 10, 2010 9:34 am
Location: Vernon, New Jersey
Hand Fed Coal Stove: DS Machines DS-1600 Hot Air Circulator

Post by I'm On Fire » Thu. Dec. 23, 2010 10:20 am

I have a giant cast iron kettle I put on the stove that holds about 1 gallon of water. I've put it on the stove while the bottom was wet and also spilled some water on the stove while putting the kettle down (its kind of heavy with the water in it) and I've not noticed anything bad happening to the stove.

 
User avatar
dlj
Member
Posts: 1273
Joined: Thu. Nov. 27, 2008 6:38 pm
Location: Monroe, NY
Hand Fed Coal Stove: Vermont Castings Resolute
Baseburners & Antiques: Glenwood Baseheater #6
Coal Size/Type: Stove coal
Other Heating: Oil Furnace, electric space heaters

Post by dlj » Thu. Dec. 23, 2010 10:29 am

Adamiscold wrote:What are the concerns with having a pot of water on your stove?

If the bottom of the pot is wet and placed on the stove or water is spilled while filling the pot on the stove will a little water hurt the stove? Would using hot water compared to cold water really make much of a difference if the surface of the stove is 400*+?

Can you have too big of a pot on your stove? Is it better to have a larger pot then to have a smaller pot run out of water?

Does the pot suck away some of the temperature from the stove?

Is there any other issues that one should be concerned about?
I don't really know the answers to any of your questions, only I've had a pot of water on my stove(s) for a few decades without any problems I've ever detected... As far as size, I prefer the largest I can get that fits where I put it so I don't have to fill it up as often... The size I use depends on what looks good... My wife bought me a pot with a dragon on it that we all like a lot... She bought it as a birthday present for me a couple years ago, I really like it... Fits perfectly on the back plate of my stove, works well and looks nice...

dj

 
jim d
Member
Posts: 1271
Joined: Mon. Dec. 08, 2008 7:16 pm
Location: taunton ma
Contact:

Post by jim d » Thu. Dec. 23, 2010 11:03 am

don't you just love that humidity

 
User avatar
DOUG
Member
Posts: 904
Joined: Wed. Jul. 09, 2008 8:49 pm
Location: PITTSBURGH, PENNSYLVANIA

Post by DOUG » Thu. Dec. 23, 2010 11:29 am

Yes I use a large stock pot of water on my stove in the basement. I just place it right on the stove. I notice a big difference in the comfort of the house by doing so. I have to refill the pot twice a day, once in the morning and once again before I retire for the evening. I think by using a large pot of water, it helps better than using a small pot with it's possibly running dry. The large pot of water allows more heat radiation as it nicely simmers away.

 
User avatar
blrman07
Member
Posts: 2383
Joined: Mon. Sep. 27, 2010 3:39 pm
Location: Tupelo Mississippi

Post by blrman07 » Thu. Dec. 23, 2010 1:06 pm

We put one of our glass cooking pots on the stove. Then we fill it with water 1/2 way and the rest of the way with the water base liquid potpouri (s)from the dollar store. She will use the reds then blues then yellow and experiment with different colors and scents. Adds a dimension to the humidity thing.


 
User avatar
Adamiscold
Member
Posts: 1116
Joined: Fri. Feb. 29, 2008 7:09 am
Location: Winchendon,Ma

Post by Adamiscold » Thu. Dec. 23, 2010 5:47 pm

Thanks guys, I was worried what a little water would do to hot steel. I have what I believe to be a 10qt pot, it's pretty tall and I seem to be going through half a pot of water a day. Can't say I really noticed any difference with it though, it's been in the 20's -30's the last couple of days.

 
User avatar
SMITTY
Member
Posts: 12523
Joined: Sun. Dec. 11, 2005 12:43 pm
Location: West-Central Mass
Stoker Coal Boiler: EFM 520 Highboy
Coal Size/Type: Rice / Blaschak anthracite
Other Heating: Oil fired Burnham boiler

Post by SMITTY » Thu. Dec. 23, 2010 5:54 pm

My father used to do this on the woodstove way back in the day. The only issues I saw was barnicle formation from all the minerals in the water being left behind. Stains the pot & the stove. Stove got repainted every spring, so that was no biggie. Basically just white streaks.

 
User avatar
cokehead
Member
Posts: 2116
Joined: Thu. Dec. 27, 2007 8:28 pm
Location: Mystic, CT
Contact:

Post by cokehead » Thu. Dec. 23, 2010 5:58 pm

I have hard acidic surface well water. Cast iron non-enameled pots will rust inside. It will trash a pot over time. :roll: I used a 3 gallon stainless steel stock pot. It's stained on the inside now. I could still use it. It isn't appetizing to look at though.

 
User avatar
jpete
Member
Posts: 10829
Joined: Thu. Nov. 22, 2007 9:52 am
Location: Warwick, RI
Hand Fed Coal Stove: Harman Mk II
Coal Size/Type: Stove, Nut, Pea
Other Heating: Dino juice

Post by jpete » Thu. Dec. 23, 2010 6:52 pm

My Harman doesn't even get hot enough to warm up a gallon of water. I envy you guys. I have to run a humidifier.

 
smokeyCityTeacher
Member
Posts: 768
Joined: Mon. Oct. 19, 2009 10:41 pm
Location: Pittsburgh, PA
Hand Fed Coal Stove: Hitzer 30-95

Post by smokeyCityTeacher » Thu. Dec. 23, 2010 7:30 pm

I keep a big pot of hot water on my chubby when its running.

 
User avatar
acesover
Member
Posts: 452
Joined: Sat. Nov. 17, 2007 9:07 pm
Location: Plymouth Meeting, Pa

Post by acesover » Thu. Dec. 23, 2010 8:05 pm

Common on give common sense a brake. Are u a yeepie

 
User avatar
acesover
Member
Posts: 452
Joined: Sat. Nov. 17, 2007 9:07 pm
Location: Plymouth Meeting, Pa

Post by acesover » Thu. Dec. 23, 2010 8:06 pm

Smitty loves u

 
User avatar
acesover
Member
Posts: 452
Joined: Sat. Nov. 17, 2007 9:07 pm
Location: Plymouth Meeting, Pa

Post by acesover » Thu. Dec. 23, 2010 8:08 pm

Sorry just had to


Post Reply

Return to “Hand Fired Coal Stoves & Furnaces Using Anthracite”