Pioneer changed coal not good

Pioneer changed coal not good

PostBy: maurizziot On: Wed Feb 09, 2011 10:12 pm

i recently purchase loose rice coal from a local guy here in town. i have been running the stove
all season (pioneer rear vent power venter) as soon as i changed to different brand coal the stove will not get up to temp.
usually it runs at 525 temp full bore but now i can get it past 425 temp. i increased the feed rate on the coal trol from 45 to 63 made a little
difference. i was able before to get hot coal dropping of the grate, now i can. anybody have any ideas, or did i get some bad coal, sounds funny
but i do not know. draft has not been touched.
User avatar
maurizziot
Member
 
Posts: 66
Joined: Sun Oct 05, 2008 1:32 pm
Location: Middletown N.Y.
Stove/Furnace Make: Leisure line Coal Stove
Stove/Furnace Model: Pioneer rear vent

Visit Leisure Line Stove

Re: Pioneer changed coal not good

PostBy: Flyer5 On: Thu Feb 10, 2011 12:15 am

Eliminate the possibility ,stop get a couple bags of rice somewhere and try it see what happens . Dave
User avatar
Flyer5
Leisure Line Rep.
 
Posts: 2708
Joined: Sun Oct 21, 2007 4:23 pm
Location: Montrose PA
Stove/Furnace Make: Leisure Line Pioneer
Stove/Furnace Model: Burning Leisure Line WL110

Re: Pioneer changed coal not good

PostBy: Freddy On: Thu Feb 10, 2011 5:15 am

You say the draft hasn't been touched, but has it been checked? Maybe it's time for a cleaning. Ash build up can cause this type of issue.
User avatar
Freddy
State of Maine Moderator
 
Posts: 5369
Joined: Fri Apr 11, 2008 2:54 pm
Location: Orrington, Maine
Stove/Furnace Make: Axeman Anderson 130

Visit Leisure Line Stove