Hitzer 50-93 Questions, Fueling and Water Jacket

 
AKShadow
Member
Posts: 88
Joined: Wed. Jan. 12, 2011 12:05 pm
Location: Fairbanks, AK
Hand Fed Coal Stove: Warm Morning 523
Coal Size/Type: Sub-bituminous, stove

Post by AKShadow » Tue. Mar. 29, 2011 2:10 pm

Grizzley- The 354 does seem like it would be perfect for what I need, I just don't want to shovel coal, after I've already shoveled coal. Its similar to why I don't want to burn wood anymore. I cant stand handling it six times before it actually gets in the firebox. I am curious about the Kodiak and will probably call them too.

Fire375 - you would be suprised on the level of dust from this coal when dumped from a bucket, not that bad as far as Im concerned. However, I was thinking about installing an exhaust fan/hood above the stove to exit any dust while loading.

Francob - antique stoves are few and FAR between up here. I know of some people burning our sub-bit in TLC's and Hitzer 82s just fine, so I imagine the other stoves I'm looking at arent going to be too far off from performance.

Just still hoping someone could be, " Oh yeah, I burn bit, no prob, dump it right from the top! Even throw a log in once in awhile" I know, the problem is I am honestly asking too much from a stove.

 
User avatar
freetown fred
Member
Posts: 30293
Joined: Thu. Dec. 31, 2009 12:33 pm
Location: Freetown,NY 13803
Hand Fed Coal Stove: HITZER 50-93
Coal Size/Type: BLASCHAK Nut

Post by freetown fred » Tue. Mar. 29, 2011 2:19 pm

YES, you're right. Now it's time to make some realistic compromises. ;)

 
franco b
Site Moderator
Posts: 11416
Joined: Wed. Nov. 05, 2008 5:11 pm
Location: Kent CT
Hand Fed Coal Stove: V ermont Castings 2310, Franco Belge 262
Baseburners & Antiques: Glenwood Modern Oak 114
Coal Size/Type: nut and pea

Post by franco b » Tue. Mar. 29, 2011 6:18 pm

Here is a picture from the Sears 1927 catalog. You can see the arrangement for burning bit coal. Perhaps you could fabricate a similar set up in another stove that is available to you. Keep in mind that unburned smoke is just not unpleasant but is costing you money in waste heat in the smoke as fuel, but also in additional work in cleaning a stove that is a smudge pot.

Attachments

Sears Dauntless b.jpg
.JPG | 408.3KB | Sears Dauntless b.jpg


 
AKShadow
Member
Posts: 88
Joined: Wed. Jan. 12, 2011 12:05 pm
Location: Fairbanks, AK
Hand Fed Coal Stove: Warm Morning 523
Coal Size/Type: Sub-bituminous, stove

Post by AKShadow » Tue. Mar. 29, 2011 11:58 pm

Looks a lot like my Jotul 507...that I can't find doors for. No wonder the previous owner was taking it to the dump :P

 
User avatar
McGiever
Member
Posts: 10130
Joined: Sun. May. 02, 2010 11:26 pm
Location: Junction of PA-OH-WV
Stoker Coal Boiler: AXEMAN-ANDERSON 130 "1959"
Hand Fed Coal Boiler: BUCKET A DAY water heater
Hand Fed Coal Stove: Warm Morning 414A
Coal Size/Type: PEA,NUT,STOVE /ANTHRACITE
Other Heating: Ground Source Heat Pump and some Solar

Post by McGiever » Mon. Apr. 04, 2011 11:08 am

AKShadow wrote:Looks a lot like my Jotul 507...that I can't find doors for. No wonder the previous owner was taking it to the dump :P
Wouldn't it be great if another Jotul 507 owner,, during off season, could allow their doors to be the pattern for door replacement castings to be made? :idea:

 
AKShadow
Member
Posts: 88
Joined: Wed. Jan. 12, 2011 12:05 pm
Location: Fairbanks, AK
Hand Fed Coal Stove: Warm Morning 523
Coal Size/Type: Sub-bituminous, stove

Post by AKShadow » Mon. Apr. 04, 2011 12:40 pm

McGiever wrote:
AKShadow wrote:Looks a lot like my Jotul 507...that I can't find doors for. No wonder the previous owner was taking it to the dump :P
Wouldn't it be great if another Jotul 507 owner,, during off season, could allow their doors to be the pattern for door replacement castings to be made? :idea:
Well I hadn't thought 'o that! I did think about bringing the entire stove down to the local metal shop to see if they could cast off of that...

Post Reply

Return to “Hand Fired Coal Stoves & Furnaces Using Anthracite”