victory 700 assembly

victory 700 assembly

PostBy: edscarts On: Thu Sep 22, 2011 10:34 pm

I just purchased a victory 700 coal/wood stove that was disassembled. I have figured out the shakers on the bottom but cant seem to assemble the hopper plates. Is there anyone that has a picture of the inside of this stove or a manual.
edscarts
 
Stove/Furnace Make: victory
Stove/Furnace Model: 700

Re: victory 700 assembly

PostBy: franco b On: Fri Sep 23, 2011 10:50 am

Isn't this stove a copy of the Franco Belge? If so here is a picture.
Attachments
hopper.jpg
(100.38 KiB) Viewed 73 times
View: New PagePopup • Select:BBCode
[nepathumb]29380[/nepathumb]
franco b
 
Hand Fed Coal Stove: V ermont Castings 2310, Franco Belge 262
Baseburners & Antiques: Glenwood Modern Oak 114
Coal Size/Type: nut and pea

Re: victory 700 assembly

PostBy: david1912 On: Wed Dec 25, 2013 6:27 pm

Can you tell me were you or I can get new parts for my victory 700 coal stove I need new grates for it can not get them form the store in Boyertown on rt. 100 they went out of business.

David

david19125@msn.com
P.S.
I have had this stove in my house for 30 years and it can put a lot of heat out.
david1912
 
Hand Fed Coal Stove: victory 700 coal stove
Coal Size/Type: pee coal

Visit Hitzer Stoves

Re: victory 700 assembly

PostBy: freetown fred On: Wed Dec 25, 2013 6:34 pm

Welcome to the FORUM my friend & a Merry Christmas to you & yours--be patient--help is not far away :)
freetown fred
 
Hand Fed Coal Stove: HITZER 50-93
Coal Size/Type: BLASCHAK Nut/Stove mix

Re: victory 700 assembly

PostBy: D-frost On: Wed Dec 25, 2013 7:26 pm

There is a great parts store in Wakefield, N.H. called "Woodmanspartsplus". If it"s out their, they can get it. Google for their website. Good luck, and Happy Holidays
D-frost
 
Hand Fed Coal Stove: Chubby
Hand Fed Coal Furnace: Yukon Eagle I (multi-fuel oil, wood/coal)
Coal Size/Type: nut/Reading anthracite
Other Heating: Jotul #118 wood burner

Re: victory 700 assembly

PostBy: franco b On: Wed Dec 25, 2013 9:47 pm

If Franco Belge parts fit then no problem.
franco b
 
Hand Fed Coal Stove: V ermont Castings 2310, Franco Belge 262
Baseburners & Antiques: Glenwood Modern Oak 114
Coal Size/Type: nut and pea

Re: victory 700 assembly

PostBy: lewis On: Wed Dec 25, 2013 9:48 pm

They dont
lewis
 
Stove/Furnace Make: Harman
Stove/Furnace Model: Old Model Magnum

Re: victory 700 assembly

PostBy: tsb On: Wed Dec 25, 2013 10:08 pm

http://www.kringsonline.com/
They didn't close, they just moved a little north on 100.
tsb
 
Stoker Coal Boiler: Binford 2000
Hot Air Coal Stoker Stove: LL Pioneer top vent
Hand Fed Coal Stove: Saey Hanover II

Re: victory 700 assembly

PostBy: lewis On: Thu Dec 26, 2013 1:53 am

The Stove is 100 % obsolete the only way to get a replacement part would be to locate a service or foundry to recast it. I found one for sale about 8 years ago and bought it for back up parts.
Attachments
IMG_6655.JPG
(214.29 KiB) Viewed 11 times
View: New PagePopup • Select:BBCode
[nepathumb]47245[/nepathumb]
lewis
 
Stove/Furnace Make: Harman
Stove/Furnace Model: Old Model Magnum

Re: victory 700 assembly

PostBy: david1912 On: Thu Dec 26, 2013 11:05 am

Thanks for your help I found the woodman's partsplus site also I tried to look up the parts for my stove but they didn't find them. I'm going to call them and see if they can get the parts I need. I looked at the parts for the franco belge coal stove and they look like the ones in my stove I will have to ask them about that and see what they say. I don't want to get rid of the stove it is a real good stove and doesn't take much care to jeep it running all day and night. I burn one coal pale a night and one pale a day so that is about 20 lbs. of coal a day and it eats the hole house.

Thanks again

David1923
david1912
 
Hand Fed Coal Stove: victory 700 coal stove
Coal Size/Type: pee coal

Visit Hitzer Stoves