Talk of the Neighborhood

 
User avatar
freetown fred
Member
Posts: 30299
Joined: Thu. Dec. 31, 2009 12:33 pm
Location: Freetown,NY 13803
Hand Fed Coal Stove: HITZER 50-93
Coal Size/Type: BLASCHAK Nut

Post by freetown fred » Mon. Oct. 31, 2011 8:18 pm

Or you can just hit shift & tap 8--oh hell, I know it's cheatin--- :clap: toothy

 
User avatar
freetown fred
Member
Posts: 30299
Joined: Thu. Dec. 31, 2009 12:33 pm
Location: Freetown,NY 13803
Hand Fed Coal Stove: HITZER 50-93
Coal Size/Type: BLASCHAK Nut

Post by freetown fred » Mon. Oct. 31, 2011 8:20 pm

Outstanding my friend--damn good investment weren't it. ;) Yep, they're touchy lil lady's :)
saragnac wrote:It's 19 out right now and the stove is still not working too hard. I did a little math and since I started the stove (Oct 15) I'm on 50lb bag #9 which is under $70. If I was using the oil burner I would have gone through $300 in fuel and temps below 70. Another friend stopped by who was days away from buying a pellet stove and has now ordered the DVC-500. He stopped by about three times to check out my set up. He loves the fact that there is absolutely no odor in the house and can't get enough of the radiant heat.

Last year I couldn't get 10 days out of 100 gallons of oil, this year is going to be different.

 
User avatar
Rob R.
Site Moderator
Posts: 18004
Joined: Fri. Dec. 28, 2007 4:26 pm
Location: Chazy, NY
Stoker Coal Boiler: EFM 520
Hand Fed Coal Stove: Chubby Jr

Post by Rob R. » Sun. Dec. 18, 2011 8:18 am

saragnac wrote:It's 19 out right now and the stove is still not working too hard. I did a little math and since I started the stove (Oct 15) I'm on 50lb bag #9 which is under $70. If I was using the oil burner I would have gone through $300 in fuel and temps below 70. Another friend stopped by who was days away from buying a pellet stove and has now ordered the DVC-500. He stopped by about three times to check out my set up. He loves the fact that there is absolutely no odor in the house and can't get enough of the radiant heat.

Last year I couldn't get 10 days out of 100 gallons of oil, this year is going to be different.
I bet that Harman is working this morning. About 10 degrees in my neighborhood, -7 in Saranac Lake. :o


 
User avatar
SteveZee
Member
Posts: 2512
Joined: Wed. May. 11, 2011 10:45 am
Location: Downeast , Maine
Hand Fed Coal Stove: Glenwood Modern Oak 116 & Glenwood 208 C Range

Post by SteveZee » Sun. Dec. 18, 2011 8:56 am

Rob R. wrote:
saragnac wrote:It's 19 out right now and the stove is still not working too hard. I did a little math and since I started the stove (Oct 15) I'm on 50lb bag #9 which is under $70. If I was using the oil burner I would have gone through $300 in fuel and temps below 70. Another friend stopped by who was days away from buying a pellet stove and has now ordered the DVC-500. He stopped by about three times to check out my set up. He loves the fact that there is absolutely no odor in the house and can't get enough of the radiant heat.

Last year I couldn't get 10 days out of 100 gallons of oil, this year is going to be different.
I bet that Harman is working this morning. About 10 degrees in my neighborhood, -7 in Saranac Lake. :o
Cold here too Rob! Got up this morning at 7am (slept in) and it was 9 degrees and blustery (-5 wind chill). Only a high of 22 today so good test. The house was about 68 when I got up which is glorious for me! I could really tell the difference though as both stove were quite a bit "lower" than normal. After I opened up the Herald and threw a couple scoops on, I went to shake it down and the whole pot just about collapsed into the pan! :shock: Good thing I'd let those 2 scoops catch or I might have lost it. Took me 20 min with the ash pan door open to get it rippin again as I was afraid to shake it any more till I knew it was gonna catch. Cruising along at 500 at the moment though! The Kitchen stove was also low so I tossed in a couple maple splits and opened er up. Soon as they caught I scooped on the coal and it was ripping again. Just that little bit of wood flame gets the superheated air flowing through the coals and lights off a good bit faster. Got to say I'm quite pleased with these two. Tonight's another single digit and teens day so maybe I'll shake and fill a little later then the 7pm I used last night! ;)

 
User avatar
wsherrick
Member
Posts: 3744
Joined: Wed. Jun. 18, 2008 6:04 am
Location: High In The Poconos
Hand Fed Coal Stove: Glenwood Base Heater, Crawford Base Heater
Baseburners & Antiques: Crawford Base Heater, Glenwood, Stanley Argand
Coal Size/Type: Chestnut, Stove Size

Post by wsherrick » Sun. Dec. 18, 2011 9:10 am

I lit the little Glenwood yesterday morning. It's 15 outside right now. I have both stoves running easy at 350-400. The house is around 75 or so. I can walk around in my red flannel union suit in perfect comfort.
Since yesterday when I started the Glenwood No 9, it has consumed around 17 pounds of coal.

 
saragnac
Member
Posts: 76
Joined: Tue. Aug. 30, 2011 9:41 pm
Location: Saranac Lake, NY

Post by saragnac » Sun. Dec. 18, 2011 9:31 am

-8 this morning and the Harman is just purring along. I stoked it up about 10 last night and didn't expect the below zero temps so I didn't do anything special or heap it in to the max. I slept in a bit this morning and when I saw the temps I decided to get to the stove right away. To my surprise it was still doing great but it was a bit low, not low enough to worry about adding coal before shaking but I just smiled and gladly took good care of it. When I decided to get this stove as supplemental heat, I was hoping that I wouldn't need my oil burner until it got below zero......boy was I wrong! The main floor is plenty warm (mid 70's) and the second and third floors are just fine. I may not even need the oil furnace this winter since the Harman is keeping my house comfortable at -8 and I'm running her at about 500*. When it's -30 I'll push it up to 600 and see what happens.

At this point, even with the milder weather this season, I would have gone through about 400 gallons of fuel. I haven't checked lately but I don't even think I've gone through 2400 lbs of coal yet. By my math that's about 1/3 the heating costs. LOVING IT!


 
User avatar
SteveZee
Member
Posts: 2512
Joined: Wed. May. 11, 2011 10:45 am
Location: Downeast , Maine
Hand Fed Coal Stove: Glenwood Modern Oak 116 & Glenwood 208 C Range

Post by SteveZee » Sun. Dec. 18, 2011 10:41 am

saragnac wrote:-8 this morning and the Harman is just purring along. I stoked it up about 10 last night and didn't expect the below zero temps so I didn't do anything special or heap it in to the max. I slept in a bit this morning and when I saw the temps I decided to get to the stove right away. To my surprise it was still doing great but it was a bit low, not low enough to worry about adding coal before shaking but I just smiled and gladly took good care of it. When I decided to get this stove as supplemental heat, I was hoping that I wouldn't need my oil burner until it got below zero......boy was I wrong! The main floor is plenty warm (mid 70's) and the second and third floors are just fine. I may not even need the oil furnace this winter since the Harman is keeping my house comfortable at -8 and I'm running her at about 500*. When it's -30 I'll push it up to 600 and see what happens.

At this point, even with the milder weather this season, I would have gone through about 400 gallons of fuel. I haven't checked lately but I don't even think I've gone through 2400 lbs of coal yet. By my math that's about 1/3 the heating costs. LOVING IT!
That's outstanding! At this rate you'll pay for that stove in the very first year! Nice going and as far as I'm concerned, the "heat" from coal is unbeatable. It's just so steady that you don't notice any real changes. Every other heat source I've used was always cycling up and down and the house always had drafts or cold spots. This year it a different place! :D

 
mason coal burner
Member
Posts: 797
Joined: Sun. Sep. 27, 2009 12:25 pm
Location: so. nh

Post by mason coal burner » Sun. Dec. 18, 2011 12:13 pm

temperature here this morning was 18 . still running just the glenwood 111 . the room where the stove sits was 71 this morning the upstairs was 63 . stove temp. was 375 . I lit a wood fire in the hitzer in the basement to take off the chill . not to bad for this old house and the old stove .

Post Reply

Return to “Hand Fired Coal Stoves & Furnaces Using Anthracite”