Buying a Barometric Damper.

Post Reply
 
User avatar
Smokeyja
Member
Posts: 1997
Joined: Mon. Nov. 21, 2011 6:57 pm
Location: Richmond, VA.
Baseburners & Antiques: Glenwood #6 baseheater, Richmond Advance Range, WarmMorning 414a x2
Coal Size/Type: Nut / Anthracite
Other Heating: none
Contact:

Post by Smokeyja » Wed. Nov. 30, 2011 5:55 pm

What are your opinions on Barometric damper that are on the market?

I see quite a few listed on Amazon. What is a good brand? What is cheap and what is the Cadillac of Baro dampers.

http://amzn.com/B002FYG102

The Warm Morning manual suggest use with a Baro Damper and I can see why. Trying to keep the warm morning stove set just right to last throughout the night has been challenging for me .
Last edited by Smokeyja on Wed. Nov. 30, 2011 6:07 pm, edited 1 time in total.

 
User avatar
Rob R.
Site Moderator
Posts: 18004
Joined: Fri. Dec. 28, 2007 4:26 pm
Location: Chazy, NY
Stoker Coal Boiler: EFM 520
Hand Fed Coal Stove: Chubby Jr

Post by Rob R. » Wed. Nov. 30, 2011 5:57 pm

Aren't you burning wood? If so, skip the baro.

 
User avatar
WNY
Member
Posts: 6307
Joined: Mon. Nov. 14, 2005 8:40 am
Location: Cuba, NY
Hot Air Coal Stoker Stove: Keystoker 90K, Leisure Line Hyfire I
Coal Size/Type: Rice
Contact:

Post by WNY » Wed. Nov. 30, 2011 6:02 pm

If you do a search on here, Most of us use the Field Control Type RC, but the one you show would work too. Don't use with wood, you would have to close it off anyway.

Look at Patriot Supply for the RC type baros, they are better and probably cheaper.

http://www.patriot-supply.com/products/showitem.c ... S_02722701

 
User avatar
Smokeyja
Member
Posts: 1997
Joined: Mon. Nov. 21, 2011 6:57 pm
Location: Richmond, VA.
Baseburners & Antiques: Glenwood #6 baseheater, Richmond Advance Range, WarmMorning 414a x2
Coal Size/Type: Nut / Anthracite
Other Heating: none
Contact:

Post by Smokeyja » Wed. Nov. 30, 2011 6:08 pm

Rob R. wrote:Aren't you burning wood? If so, skip the baro.
No, I tested the stove with wood but I started burning coal in it last night. I am going to pick up as much coal as I can this weekend.


 
User avatar
coaledsweat
Site Moderator
Posts: 13767
Joined: Fri. Oct. 27, 2006 2:05 pm
Location: Guilford, Connecticut
Stoker Coal Boiler: Axeman Anderson 260M
Coal Size/Type: Pea

Post by coaledsweat » Wed. Nov. 30, 2011 6:30 pm

Smokeyja wrote:What is a good brand? What is cheap and what is the Cadillac of Baro dampers.

http://amzn.com/B002FYG102
Please don't buy that thing, go with the Field Controls R/C or M. You can stop by your local HVAC supply house and pick one up for about $35. If you plan to burn wood in the future, get a cap for the pipe then you pull the baro and cap it off.

 
franco b
Site Moderator
Posts: 11417
Joined: Wed. Nov. 05, 2008 5:11 pm
Location: Kent CT
Hand Fed Coal Stove: V ermont Castings 2310, Franco Belge 262
Baseburners & Antiques: Glenwood Modern Oak 114
Coal Size/Type: nut and pea

Post by franco b » Wed. Nov. 30, 2011 7:49 pm

Smokeyja wrote: The Warm Morning manual suggest use with a Baro Damper and I can see why. Trying to keep the warm morning stove set just right to last throughout the night has been challenging for me .
The Warm Morning has a bottom door with machined surfaces to fit tightly. Check with a dollar bill closed at several spots in the door to see if it grips the bill.

If you have the stove filled to the top of the bricks and the air almost closed then it should easily go overnight or much longer. Also do a good job of shaking down the ash.

 
User avatar
Yanche
Member
Posts: 3026
Joined: Fri. Dec. 23, 2005 12:45 pm
Location: Sykesville, Maryland
Stoker Coal Boiler: Alternate Heating Systems S-130
Coal Size/Type: Anthracite Pea

Post by Yanche » Wed. Nov. 30, 2011 8:45 pm

coaledsweat wrote:
Smokeyja wrote:What is a good brand? What is cheap and what is the Cadillac of Baro dampers.

http://amzn.com/B002FYG102
Please don't buy that thing, go with the Field Controls R/C or M. You can stop by your local HVAC supply house and pick one up for about $35. If you plan to burn wood in the future, get a cap for the pipe then you pull the baro and cap it off.
A 6" Fields RC (P/N 02722701) is $23 at my supply house. Fields 6" type M (P/N 02724001) $57.40

 
User avatar
Smokeyja
Member
Posts: 1997
Joined: Mon. Nov. 21, 2011 6:57 pm
Location: Richmond, VA.
Baseburners & Antiques: Glenwood #6 baseheater, Richmond Advance Range, WarmMorning 414a x2
Coal Size/Type: Nut / Anthracite
Other Heating: none
Contact:

Post by Smokeyja » Wed. Nov. 30, 2011 9:46 pm

franco b wrote:
Smokeyja wrote: The Warm Morning manual suggest use with a Baro Damper and I can see why. Trying to keep the warm morning stove set just right to last throughout the night has been challenging for me .
The Warm Morning has a bottom door with machined surfaces to fit tightly. Check with a dollar bill closed at several spots in the door to see if it grips the bill.

If you have the stove filled to the top of the bricks and the air almost closed then it should easily go overnight or much longer. Also do a good job of shaking down the ash.
I didn't fill the WM up much with coal the other night just because we have warmer days still. I have a real strong draft in my flue and there are some parts on the stove that aren't 100% air tight and I am having a hard time setting the dampers just right to keep the stove hot and steady yet not allowing it to overfire. It seems I am getting a good feel for it now. I was reading about the Baro damper thread you guys have going so I was really interested in it. If I ever choose to burn mainly wood I'll have to buy a stove made for wood. The WM can burn wood but it's not really practical unless you want to constantly feed it every hour.


 
franco b
Site Moderator
Posts: 11417
Joined: Wed. Nov. 05, 2008 5:11 pm
Location: Kent CT
Hand Fed Coal Stove: V ermont Castings 2310, Franco Belge 262
Baseburners & Antiques: Glenwood Modern Oak 114
Coal Size/Type: nut and pea

Post by franco b » Wed. Nov. 30, 2011 10:07 pm

Smokeyja wrote:I didn't fill the WM up much with coal the other night just because we have warmer days still.
Always fill the stove regardless of desired heat output. A compact deep fire box as in your stove will hold a small fire much better when surrounded with hot coal. By not filling it the fire gets too cool to hold a small fire. How much you can choke it down you will learn by experience.

 
User avatar
SteveZee
Member
Posts: 2512
Joined: Wed. May. 11, 2011 10:45 am
Location: Downeast , Maine
Hand Fed Coal Stove: Glenwood Modern Oak 116 & Glenwood 208 C Range

Post by SteveZee » Thu. Dec. 01, 2011 10:21 am

franco b wrote:
Smokeyja wrote:I didn't fill the WM up much with coal the other night just because we have warmer days still.
Always fill the stove regardless of desired heat output. A compact deep fire box as in your stove will hold a small fire much better when surrounded with hot coal. By not filling it the fire gets too cool to hold a small fire. How much you can choke it down you will learn by experience.
Exactly right Franco. No matter the weather situation, always fill it completely. How much heat it puts out will depend on how much air it is allowed. You're still thinking like a wood burner. The stove is designed, once going, to be filled (totally) and shaken on a schedule that the stove will show you. Start with the easiest, which is every 12hrs. If thats not enough it to 8hrs but honestly a warm morning (even the small ones) in decent shape burning anthracite should do fine on 12/12 schedule.

 
murphyslaw
Member
Posts: 149
Joined: Fri. Nov. 20, 2009 8:11 pm
Location: South Central, Alaska

Post by murphyslaw » Thu. Dec. 01, 2011 1:24 pm

My local parts house wants $97 bucks for a baro.....

 
User avatar
Smokeyja
Member
Posts: 1997
Joined: Mon. Nov. 21, 2011 6:57 pm
Location: Richmond, VA.
Baseburners & Antiques: Glenwood #6 baseheater, Richmond Advance Range, WarmMorning 414a x2
Coal Size/Type: Nut / Anthracite
Other Heating: none
Contact:

Post by Smokeyja » Thu. Dec. 01, 2011 7:29 pm

franco b wrote:
Smokeyja wrote:I didn't fill the WM up much with coal the other night just because we have warmer days still.
Always fill the stove regardless of desired heat output. A compact deep fire box as in your stove will hold a small fire much better when surrounded with hot coal. By not filling it the fire gets too cool to hold a small fire. How much you can choke it down you will learn by experience.
Thank you for the important information. I have a lot of adjustment getting used to keeping a steady fire. I am hoping to get a good amount of coal this weekend. I used up what my friend has givin me.

Post Reply

Return to “Hand Fired Coal Stoves & Furnaces Using Anthracite”