Yeah, I will definitely have to construct something so I can get to the back of my stove.
So I don't need the baro?? If I keep mine on, is it going to waste heat? It's only open a little bit most of the time. If it's windy outside, I can see it opening up more. If you remember me saying before, my baro is not a "legtitimate" baro, but rather just a flap with a weight inside and a screw on the outside to make general adjustments- no numbers or anything like that...
The baro is part of the distance which I figured in when I postitioned the stove on the hearth. I guess I would just get a piece of stove pipe the same length to replace it next year??
Damp Coal?
-
- Site Moderator
- Posts: 11417
- Joined: Wed. Nov. 05, 2008 5:11 pm
- Location: Kent CT
- Hand Fed Coal Stove: V ermont Castings 2310, Franco Belge 262
- Baseburners & Antiques: Glenwood Modern Oak 114
- Coal Size/Type: nut and pea
You don't have to replace it. All I meant was that on your particular stove it is not as necessary as on a stove without a thermostat to control draft. If it would make it easier to service the stove without it then get rid of it. If it makes no difference then keep it.
-
- Site Moderator
- Posts: 11417
- Joined: Wed. Nov. 05, 2008 5:11 pm
- Location: Kent CT
- Hand Fed Coal Stove: V ermont Castings 2310, Franco Belge 262
- Baseburners & Antiques: Glenwood Modern Oak 114
- Coal Size/Type: nut and pea
There are a lot of members in this forum with a great deal of experience some of which I have learned from too in areas that I have not had any direct experience.
I do get paid for trouble shooting. It is how I have always earned a living, just not on coal stoves. It's pleasurable and mentally stimulating, keeps the brain from getting soggy.
I do get paid for trouble shooting. It is how I have always earned a living, just not on coal stoves. It's pleasurable and mentally stimulating, keeps the brain from getting soggy.
- SteveZee
- Member
- Posts: 2512
- Joined: Wed. May. 11, 2011 10:45 am
- Location: Downeast , Maine
- Hand Fed Coal Stove: Glenwood Modern Oak 116 & Glenwood 208 C Range
That is a 'legit" baro. That's all they are is a weighted flap. The thing is, it shouldn't be open at all unless it is a windy day. If it's not a windy day and it's open even a little, then you need to move the weight till it stays closed under normal conditions.musikfan6 wrote:Yeah, I will definitely have to construct something so I can get to the back of my stove.
So I don't need the baro?? If I keep mine on, is it going to waste heat? It's only open a little bit most of the time. If it's windy outside, I can see it opening up more. If you remember me saying before, my baro is not a "legtitimate" baro, but rather just a flap with a weight inside and a screw on the outside to make general adjustments- no numbers or anything like that...
I've screwed it as tight as I can get it and the flap is still open a crack. What to do?SteveZee wrote:That is a 'legit" baro. That's all they are is a weighted flap. The thing is, it shouldn't be open at all unless it is a windy day. If it's not a windy day and it's open even a little, then you need to move the weight till it stays closed under normal conditions.musikfan6 wrote:Yeah, I will definitely have to construct something so I can get to the back of my stove.
So I don't need the baro?? If I keep mine on, is it going to waste heat? It's only open a little bit most of the time. If it's windy outside, I can see it opening up more. If you remember me saying before, my baro is not a "legtitimate" baro, but rather just a flap with a weight inside and a screw on the outside to make general adjustments- no numbers or anything like that...
Anyone know where I can purchase a new handtool for my Franco belge? I had two and the one broke. The little curved hook on the end split in half.