Uae Harmony
- windago
- Member
- Posts: 100
- Joined: Tue. Jan. 10, 2012 5:25 pm
- Location: honesdale
- Stoker Coal Boiler: aa130
- Coal Size/Type: pea
does anybody know what the going rate for nut is a uae in mt carmel? need a load and I want to get the best. from what I have read on other posts. all so does anybody have the number?
- VigIIPeaBurner
- Member
- Posts: 2579
- Joined: Fri. Jan. 11, 2008 10:49 am
- Location: Pequest River Valley, Warren Co NJ
- Hot Air Coal Stoker Furnace: Keystoker Koker(down)
- Hand Fed Coal Stove: Vermont Casting Vigilant II 2310
- Other Heating: #2 Oil Furnace
A week and a half a go, $165/ ton picked up. I havent' heard that it changed.
I'm burning Harmony nut. Good stuff. Red ash. I'd buy from them again.
Attachments
- windago
- Member
- Posts: 100
- Joined: Tue. Jan. 10, 2012 5:25 pm
- Location: honesdale
- Stoker Coal Boiler: aa130
- Coal Size/Type: pea
thanks for the info. I will give them a call in the morning. just to check to see if everything is good for this weekend. ive seen in other post that there is a limit to how much I can get. are they still doing this? I was going to get 2.5 ton.
does anybody know of someone that will deliver a truck load. looking for 20 or so, maybe more? if I can get it for a really good trucking cost. the problem is it needs to go to my dads place in honesdale. if the map quest is right its about 110 miles. he is getting it from outside matters in honesdale for 230 or 250 not sure. that's pick up not delivered. I think he said it was 280 or 3 something delivered.
does anybody know of someone that will deliver a truck load. looking for 20 or so, maybe more? if I can get it for a really good trucking cost. the problem is it needs to go to my dads place in honesdale. if the map quest is right its about 110 miles. he is getting it from outside matters in honesdale for 230 or 250 not sure. that's pick up not delivered. I think he said it was 280 or 3 something delivered.
-
- Member
- Posts: 193
- Joined: Sun. May. 15, 2011 6:36 am
- Location: Williamsport PA
- Hand Fed Coal Stove: Harman Mark iii
- Coal Size/Type: nut
- Other Heating: Central heat and air
Cokehead, damn nice old top break is it a .38 short? I had one 30 years ago.
Craker
Craker
- Dennis
- Member
- Posts: 1082
- Joined: Sun. Oct. 30, 2011 5:44 pm
- Location: Pottstown,Pa
- Hand Fed Coal Boiler: AHS/WOC55-multi-fuel/wood,oil,coal
- Coal Size/Type: Anthracite/stove size
Rob Knoeppel
Knoeppel Coal Deliveries
570-648-4897
570-274-0636
He deliveried 8.2 ton to me 95 miles from Mt. Carmel and said he delivers farther away. He has a high lift truck also.I believe 8.5 ton is max for his high lift truck. $240.00 ton deliveried to Pottstown Pa.on 8/25/11 and put in my coal bin in basement.
Knoeppel Coal Deliveries
570-648-4897
570-274-0636
He deliveried 8.2 ton to me 95 miles from Mt. Carmel and said he delivers farther away. He has a high lift truck also.I believe 8.5 ton is max for his high lift truck. $240.00 ton deliveried to Pottstown Pa.on 8/25/11 and put in my coal bin in basement.
.44 Russian 6 shot large frameGA cracker wrote:Cokehead, damn nice old top break is it a .38 short? I had one 30 years ago.
Craker
- windago
- Member
- Posts: 100
- Joined: Tue. Jan. 10, 2012 5:25 pm
- Location: honesdale
- Stoker Coal Boiler: aa130
- Coal Size/Type: pea
well getting ready for my trip to uae tomorrow. going for a truck load 1.5 or so what ever will fit on a 6 foot 3/4 ton truck. they said that there is nut. I hope so don't want to make the trip for half a ton, or less.
i hope to be there for around 8.
where is a good place to get breakfast after loading? ill be driving a greenish blue Chevy with a tool box in the back and OH a ton or so of coal in the back.
{("note* need smiles for coffee")}
i hope to be there for around 8.
where is a good place to get breakfast after loading? ill be driving a greenish blue Chevy with a tool box in the back and OH a ton or so of coal in the back.
{("note* need smiles for coffee")}
Harmony nut coal in Connecticut. The over exposed silver disks are a silver dollar and American Eagle for scale.
Attachments
- windago
- Member
- Posts: 100
- Joined: Tue. Jan. 10, 2012 5:25 pm
- Location: honesdale
- Stoker Coal Boiler: aa130
- Coal Size/Type: pea
1.37 ton loaded in to the bin. on top of less than 1 foot that was in the bin already.
the bin is 4x4x4. I think I have enough for a month or so now. my guess is there is 1.8 to 2 ton in the bin. if the math is right.
i like the look of the uae coal better than the stuff ive been burning. casey-kassa coal. I think there was to much bone in the batch from casey. not enough heat from the old stuff. but I will keep up the record keeping and let everyone know how it is after a week or so of burning.
the bin is 4x4x4. I think I have enough for a month or so now. my guess is there is 1.8 to 2 ton in the bin. if the math is right.
i like the look of the uae coal better than the stuff ive been burning. casey-kassa coal. I think there was to much bone in the batch from casey. not enough heat from the old stuff. but I will keep up the record keeping and let everyone know how it is after a week or so of burning.
- CoalHeat
- Member
- Posts: 8862
- Joined: Sat. Feb. 10, 2007 9:48 pm
- Location: Stillwater, New Jersey
- Stoker Coal Boiler: 1959 EFM 350
- Hand Fed Coal Stove: Harman Magnafire Mark I
- Baseburners & Antiques: Sears Signal Oak 15 & Andes Kitchen Range
- Coal Size/Type: Rice and Chestnut
- Other Heating: Fisher Fireplace Insert
- CoalHeat
- Member
- Posts: 8862
- Joined: Sat. Feb. 10, 2007 9:48 pm
- Location: Stillwater, New Jersey
- Stoker Coal Boiler: 1959 EFM 350
- Hand Fed Coal Stove: Harman Magnafire Mark I
- Baseburners & Antiques: Sears Signal Oak 15 & Andes Kitchen Range
- Coal Size/Type: Rice and Chestnut
- Other Heating: Fisher Fireplace Insert
I looked in my haul and I didn't get a revolver. Is that only with nut?cokehead wrote:.44 Russian 6 shot large frameGA cracker wrote:Cokehead, damn nice old top break is it a .38 short? I had one 30 years ago.
Craker