Qucik Time Stove

nortcan · By: **nortcan** On: Mon Jan 23, 2012 9:37 pm

Mastif. yes nut should do the job.
I send some photos just to compare with my Bride (the stove :lol:

). Looks having some common parts. The center grate on yours is called a dumping/duplex grate while on mine the center ones are the triangular ones. The outer grate looks the same it's called Ransom Ring Grate. These grates work very well. Once used to them, you will love them.

mastiffdude · By: **mastiffdude** On: Mon Jan 23, 2012 10:05 pm

Ok Nortcan yours likes very nice.Was it sandblasted?

nortcan · By: **nortcan** On: Tue Jan 24, 2012 12:14 pm

mastiffdude wrote:Ok Nortcan yours likes very nice.Was it sandblasted?

Thanks Mastiffdude.
I don't know when I told to Bryant Stove I buy, I asked to them to have the stove tear apart and have it reseal...but they didn't sand blast it then. Before that I'm not shure of it.
On the previous pages you can see all the dis-assembly ans re-assembly of the stove if you want to. On page 3 at: I have my base burner.

Smokeyja · By: **Smokeyja** On: Tue Jan 24, 2012 1:03 pm

The guy said he will sell all the parts for $100 may be able to talk him down though. He did not have te body or jacket for this stove or I would have bought it.

mastiffdude · By: **mastiffdude** On: Tue Jan 24, 2012 1:34 pm

Ok gotta study this pic and look at what i got here Thanks Jim. amazing find

Dennis · By: **Dennis** On: Tue Jan 24, 2012 1:43 pm

Smokeyja wrote:

The guy said he will sell all the parts for $100 may be able to talk him down though. He did not have te body or jacket for this stove or I would have bought it.

Josh,
That's the new compact size. Did he say what he did with the rest of the stove,throw away or rebuild another one

Smokeyja · By: **Smokeyja** On: Tue Jan 24, 2012 11:31 pm

Dennis, the owner of the salvage building said a man brought only the parts to him as a partial trade on something years ago. Too bad .

mastiffdude · By: **mastiffdude** On: Wed Jan 25, 2012 8:16 pm

Those parts are not for my stove.So if anyone wants them contact Somkeyja.

mastiffdude · By: **mastiffdude** On: Wed Jan 25, 2012 8:17 pm

Nortcan i read the thread when you worked on your BRIDE.How did the red sealer on Mica work out? I may do that too Jim

nortcan · By: **nortcan** On: Wed Jan 25, 2012 9:50 pm

mastiffdude wrote:Nortcan i read the thread when you worked on your BRIDE.How did the red sealer on Mica work out? I may do that too Jim

Finally I made some with the Ultra Black. Makes nice black seals. Rated for 500*F but the Bride runs at low temp. I will contact Permatex to ask if the Ultra black can go higher than 500*.

Smokeyja · By: **Smokeyja** On: Wed Jan 25, 2012 10:04 pm

Pierre the permatex #82180 "ultra black" works ok as you know but it turns grey under high heat although it has held to 700F on my stove pipe. What you need is here. I am going to buy some of this next.
http://www.deaconindustries.com/high-te ... alant.html

The only thing permatex has is the copper sensor safe high temp gasket maker which is 700F intermittent.

wsherrick · By: **wsherrick** On: Wed Jan 25, 2012 10:21 pm

This is a very rare stove made by a small regional company. It is missing some of its upper trim but that will not detract from its performance. It will be an excellent, efficient stove for you. I guess you have figured out by now that it is a full fledged base burner.
The stove needs to be totally disassembled and put back together with new bolts and cement. Take your time with it. After you have it all apart you will be up to your behind in parts. Make sure you take the time to make notes as to where everything goes as you take it apart. This is a high quality stove and it has all the bells and whistles that a good base burner has.
Please inform us as the project goes forward. Remember, no shortcuts. Shortcuts will lead to regret later.

mastiffdude · By: **mastiffdude** On: Wed Jan 25, 2012 10:23 pm

What trim is it missing?

wsherrick · By: **wsherrick** On: Wed Jan 25, 2012 10:26 pm

mastiffdude wrote:What trim is it missing?

Don't get upset, it won't hurt the stove, but; there is a cowling that fits between the upper main body and the nickle top piece. It covers up the round part under the top where the magazine goes through. It would be the nickle reflector. Some of them were very large and some were small.

nortcan · By: **nortcan** On: Wed Jan 25, 2012 10:43 pm

Smokeyja wrote:Pierre the permatex #82180 "ultra black" works ok as you know but it turns grey under high heat although it has held to 700F on my stove pipe. What you need is here. I am going to buy some of this next.
http://www.deaconindustries.com/high-te ... alant.html

The only thing permatex has is the copper sensor safe high temp gasket maker which is 700F intermittent.

Seems to be a good product. Thanks for the link.

Qucik Time Stove

Re: Qucik Time Stove

Re: Qucik Time Stove

Re: Qucik Time Stove

Re: Qucik Time Stove

Re: Qucik Time Stove

Re: Qucik Time Stove

Re: Qucik Time Stove

Re: Qucik Time Stove

Re: Qucik Time Stove

Re: Qucik Time Stove

Re: Qucik Time Stove

Re: Qucik Time Stove

Re: Qucik Time Stove

Re: Qucik Time Stove

Re: Qucik Time Stove