Wagner Coal Stoker

MATTHEW D. · By: **MATTHEW D.** On: Thu Mar 15, 2012 7:14 pm

I don't know the history but the Allen coal stoker and the wagner coal stoker were both made in Allentown Pa. Both have identical stoker parts. the Allen just sit up higher on the base and no ash pit. Here are some pic of the Allen stoker parts. They are not the best pics, I'll work on getting better ones.

LsFarm · By: **LsFarm** On: Thu Mar 15, 2012 7:30 pm

I like the Wagner design better, that motor/gearbox assembly looks well made and sealed..
The Allen's motor is on the opposite side of the fan, which looks like it allowed Allen to use a smaller motor. But the motor shaft through the fan then to the
small gearbox makes me think that replacing the motor or fan bearings could be a lot more work.

Neat old stuff..

Greg L

Rob R. · By: **Rob R.** On: Thu Mar 15, 2012 7:34 pm

LsFarm wrote:I like the Wagner design better, that motor/gearbox assembly looks well made and sealed.

That gear reduction motor looks like a very serious piece of hardware. I like the design of the burn pot, it looks like it would maintain a fire really well and last a lifetime.

MATTHEW D. · By: **MATTHEW D.** On: Mon Mar 26, 2012 8:50 am

I was able to assemble 3 complete units out of all the parts I had. The past few years I would get one or two calls a year from people looking for complete stokers to rebuild their wagner. Unfortunately I never had all the parts to help. Now that I have them lets see If I get any calls? http://www.anthracitecoalstokers.com/ Here are some pics of the complete units.

Rob R. · By: **Rob R.** On: Mon Mar 26, 2012 8:55 am

Nice work!

The little "hood" over the holes in the feed pipe is interesting.

rockwood · By: **rockwood** On: Mon Mar 26, 2012 12:55 pm

It would keep pressure in the auger tube to help prevent burn-back and keep smoke/fumes from coming into the hopper or bin when the stoker is running.

MATTHEW D. · By: **MATTHEW D.** On: Mon Mar 26, 2012 2:03 pm

rockwood wrote:It would keep pressure in the auger tube to help prevent burn-back and keep smoke/fumes from coming into the hopper or bin when the stoker is running.

That's right!! I haven't come across a manual for one of these. Sooner or later I'll find one in someones basement..... hopefully. Maybe scrapper has one in his archives?

MATTHEW D. · By: **MATTHEW D.** On: Thu Mar 29, 2012 8:38 pm

MATTHEW D. wrote:I don't know the history but the Allen coal stoker and the wagner coal stoker were both made in Allentown Pa. Both have identical stoker parts. the Allen just sit up higher on the base and no ash pit. Here are some pic of the Allen stoker parts. They are not the best pics, I'll work on getting better ones.

Speaking of an Allen.... worked on an Allen/efm unit yesterday. Someone in the past did a nice job of sticking an efm 520 stoker into an allen boiler. Works fine, just needed new worms, coal pipes, some plumbing issues. Check it out

whistlenut · By: **whistlenut** On: Thu Mar 29, 2012 9:20 pm

Nice pics on your website!!!! Keep that old iron running, and thanks for the pics!

bfisher01 · By: **bfisher01** On: Sun Feb 10, 2013 8:33 pm

i know this is an old thread,but i have an old wagner still running in my basement!i'm also looking for a new worm tube if anyone has any or the measurements i can get an aluminum one from my work when we run small tube as sapa.

whistlenut · By: **whistlenut** On: Sun Feb 10, 2013 9:00 pm

Phone: (570) 640 - 9156 Try Matt DiRenzo......he will be able to help you or direct you to someone who can. Joe's name will pop up I'm sure.....

Wagner Coal Stoker

Re: Wagner Coal Stoker

Re: Wagner Coal Stoker

Re: Wagner Coal Stoker

Re: Wagner Coal Stoker

Re: Wagner Coal Stoker

Re: Wagner Coal Stoker

Re: Wagner Coal Stoker

Re: Wagner Coal Stoker

Re: Wagner Coal Stoker

Re: Wagner Coal Stoker

Re: Wagner Coal Stoker