A SUNNY SIDE ?

Re: A SUNNY SIDE ?

PostBy: nortcan On: Wed Oct 17, 2012 10:54 am

Dann757 wrote:Pierre, my compliments, very nice looking area! Great job! :D


Thank you Dann757.
For now I'm satisfied with the results but will be more, well I hope so :roll: when the stove will burn anthracite.
nortcan
 
Stove/Furnace Make: Stuart,Peterson/ Grander
Stove/Furnace Model: Sunnyside/ Golden Bride

Re: A SUNNY SIDE ?

PostBy: nortcan On: Wed Oct 17, 2012 10:59 am

echos67 wrote:Looks like a perfect place to hang the stockings with care !

Great looking installation, I always enjoy reading your threads due to the detail you put into your projects.


Thanks echos67.
You know I must tell you that you and the other guys on the forum are very nice to ""accept"" my English translation.
nortcan
 
Stove/Furnace Make: Stuart,Peterson/ Grander
Stove/Furnace Model: Sunnyside/ Golden Bride

Re: A SUNNY SIDE ?

PostBy: echos67 On: Wed Oct 17, 2012 7:32 pm

nortcan wrote:
echos67 wrote:Looks like a perfect place to hang the stockings with care !

Great looking installation, I always enjoy reading your threads due to the detail you put into your projects.


Thanks echos67.
You know I must tell you that you and the other guys on the forum are very nice to ""accept"" my English translation.


Pierre,
I think your English has increased amazingly over the summer, any way your a true craftsman in any language my friend !

PS, your going to be very proud of my Nortifcations I made to the Glenwood.
echos67
 
Stove/Furnace Make: Glenwood No. 6.

Visit Hitzer Stoves

Re: A SUNNY SIDE ?

PostBy: nortcan On: Thu Oct 18, 2012 10:20 pm

Thanks keith.
About you Nortifications, is your avatar the results coming from your stove :?: :lol:
Can't wait to see that.
nortcan
 
Stove/Furnace Make: Stuart,Peterson/ Grander
Stove/Furnace Model: Sunnyside/ Golden Bride

Re: A SUNNY SIDE ?

PostBy: nortcan On: Thu Oct 18, 2012 10:28 pm

One good point about the Sunnyside or Sides is the 180* fire view.
Attachments
DSC05285.JPG
(82.32 KiB) Viewed 24 times
View: New PagePopup • Select:BBCode
From the living room
[nepathumb]37228[/nepathumb]
DSC05286.JPG
(63.07 KiB) Viewed 23 times
View: New PagePopup • Select:BBCode
From entering in the house
[nepathumb]37229[/nepathumb]
DSC05287.JPG
(69.09 KiB) Viewed 25 times
View: New PagePopup • Select:BBCode
From the kitchen and dining room
[nepathumb]37230[/nepathumb]
nortcan
 
Stove/Furnace Make: Stuart,Peterson/ Grander
Stove/Furnace Model: Sunnyside/ Golden Bride

Re: A SUNNY SIDE ?

PostBy: nortcan On: Tue Oct 23, 2012 12:43 pm

Error!
Last edited by nortcan on Wed Oct 24, 2012 12:11 pm, edited 1 time in total.
nortcan
 
Stove/Furnace Make: Stuart,Peterson/ Grander
Stove/Furnace Model: Sunnyside/ Golden Bride

Re: A SUNNY SIDE ?

PostBy: echos67 On: Wed Oct 24, 2012 5:53 am

Does this mean we will see a sunny video soon ?

Has it gotten cold enough to run some anthracite through the stove ? Very nice weather wise over here lately, even though I love the snow I can't complain about mid to upper 70's we are having.
echos67
 
Stove/Furnace Make: Glenwood No. 6.

Re: A SUNNY SIDE ?

PostBy: nortcan On: Wed Oct 24, 2012 12:09 pm

echos67 wrote:Does this mean we will see a sunny video soon ?

Has it gotten cold enough to run some anthracite through the stove ? Very nice weather wise over here lately, even though I love the snow I can't complain about mid to upper 70's we are having.


Well Keith, with all the money I made with those 2 Vid, it will be very hard to make an other one :lol: so hard to spend it :D
Not on the ant yet but could be soon, night at 0*C (32*F). If I could only stop to find something to do on the Sunny. I just finished to make the air control air tight, surfaces weren't flat and I replaced the riveted "bolt" "rod" sorry I don't know the word, anyway the thing holding the 2 parts together :oops: with a st.st bolt and put a spring on the inside so it's now adjustable.
Oops, I should make an ash pan lid. :roll:
nortcan
 
Stove/Furnace Make: Stuart,Peterson/ Grander
Stove/Furnace Model: Sunnyside/ Golden Bride

Re: A SUNNY SIDE ?

PostBy: Rob R. On: Wed Oct 24, 2012 2:17 pm

I check on this thread every couple days to see if you have that stove fired up yet. 30F this morning at my house, I think you can get the matches ready after the warm weather blows out of town this weekend.
Rob R.
 
Stoker Coal Boiler: EFM DF520
Coal Size/Type: Rice/buck
Other Heating: Dad's 1953 EFM Highboy

Re: A SUNNY SIDE ?

PostBy: nortcan On: Wed Oct 24, 2012 6:26 pm

Rob R. wrote:I check on this thread every couple days to see if you have that stove fired up yet. 30F this morning at my house, I think you can get the matches ready after the warm weather blows out of town this weekend.

Rob,
I just hope to get a Winter this year!
But don't worry, I will send a Special Note when starting ant burning :lol:
nortcan
 
Stove/Furnace Make: Stuart,Peterson/ Grander
Stove/Furnace Model: Sunnyside/ Golden Bride

Re: A SUNNY SIDE ?

PostBy: SteveZee On: Wed Oct 24, 2012 6:59 pm

Oh I have a feeling you'll get a winter Pierre!
SteveZee
 
Hand Fed Coal Stove: Glenwood Modern Oak 116 & Glenwood 208 C Range

Re: A SUNNY SIDE ?

PostBy: echos67 On: Thu Oct 25, 2012 8:57 pm

Pierre,

What have you found that works better then the high temp silicone for sealing the Mica windows ? I used the high temp silicone last year on my old Mica but i think there may be a better way that lasts much longer.
echos67
 
Stove/Furnace Make: Glenwood No. 6.

Re: A SUNNY SIDE ?

PostBy: nortcan On: Fri Oct 26, 2012 10:54 am

echos67 wrote:Pierre,

What have you found that works better then the high temp silicone for sealing the Mica windows ? I used the high temp silicone last year on my old Mica but i think there may be a better way that lasts much longer.


Well, on the Bride HT silicone is the best cause burning at very low temp. in the small living room.
Cement can make a good job but not esy to work with on very small supports and then doesn't hold very well. On the Sunny I didn't sealed the mica and will see...I just dream to find someday a really small, less than 1/8" rope gasket so it could be use for very small places.
nortcan
 
Stove/Furnace Make: Stuart,Peterson/ Grander
Stove/Furnace Model: Sunnyside/ Golden Bride

Re: A SUNNY SIDE ?

PostBy: nortcan On: Fri Oct 26, 2012 10:56 am

SteveZee wrote:Oh I have a feeling you'll get a winter Pierre!


What year :?: :lol: Maybe I should stop buying stoves :roll: and go solar?
nortcan
 
Stove/Furnace Make: Stuart,Peterson/ Grander
Stove/Furnace Model: Sunnyside/ Golden Bride

Re: A SUNNY SIDE ?

PostBy: echos67 On: Sat Oct 27, 2012 12:45 pm

nortcan wrote:
echos67 wrote:Pierre,

What have you found that works better then the high temp silicone for sealing the Mica windows ? I used the high temp silicone last year on my old Mica but i think there may be a better way that lasts much longer.


Well, on the Bride HT silicone is the best cause burning at very low temp. in the small living room.
Cement can make a good job but not esy to work with on very small supports and then doesn't hold very well. On the Sunny I didn't sealed the mica and will see...I just dream to find someday a really small, less than 1/8" rope gasket so it could be use for very small places.


Something like this is what I was thinking too ;)
It isnt 1/8" but it is 1/4" to 3/16 which may work pretty well.

Mica Gaskets.jpg
(99.46 KiB) Viewed 15 times
View: New PagePopup • Select:BBCode
[nepathumb]37423[/nepathumb]
echos67
 
Stove/Furnace Make: Glenwood No. 6.

Visit Hitzer Stoves