What kind of paint on cement board heat shield

What kind of paint on cement board heat shield

PostBy: warminmn On: Thu Aug 23, 2012 4:32 pm

I have cement board for a heat shield behind my stove. Can I use any kind of paint on the cement board? I dont want it to peel or flake off from the stoves heat. thanks
warminmn
 
Hand Fed Coal Stove: Chubby Junior, Efel Nestor Martin
Coal Size/Type: nut and stove anthracite. Soft coal
Other Heating: wood

Re: What kind of paint on cement board heat shield

PostBy: freetown fred On: Thu Aug 23, 2012 5:30 pm

I used some rustoleum I had laying around for 10 yrs or so & that was 8 yrs ago--no peeling or anything--It's the painter, not the paint--don't be bashful with it ;)
freetown fred
 
Hand Fed Coal Stove: HITZER 50-93
Coal Size/Type: BLASCHAK Nut/Stove mix

Re: What kind of paint on cement board heat shield

PostBy: nortcan On: Thu Aug 23, 2012 9:00 pm

Here in Québec, insurraces company ask for water based paint on the cement heat shields but don't know if it's very important :?:
Anyways I used regular water based paint on the cement heat shield on the back of the Golden Bride :!:
nortcan
 
Stove/Furnace Make: Stuart,Peterson/ Grander
Stove/Furnace Model: Sunnyside/ Golden Bride

Visit Hitzer Stoves

Re: What kind of paint on cement board heat shield

PostBy: warminmn On: Thu Aug 23, 2012 10:14 pm

My insurance company is not a problem but would be with a lot of people.

Fred, Did the rustoleum smell when you got it it hot the first couple times?

Nortcan, By water based do you mean latex? Maybe acrylic latex?

Im hoping to use a darker white color to kinda almost match my crappy 110 year old walls but dont want to have to redo it if it burns or falls off.

Im getting good advise here and thru a PM I received, thank you.
warminmn
 
Hand Fed Coal Stove: Chubby Junior, Efel Nestor Martin
Coal Size/Type: nut and stove anthracite. Soft coal
Other Heating: wood

Re: What kind of paint on cement board heat shield

PostBy: freetown fred On: Fri Aug 24, 2012 7:16 am

It's a good 20" from the stove--never gets hot nor smells--what are you useing as spacers off the wall? I used ceramic fence thinger-do's ;)
Attachments
001.JPG
(47.93 KiB) Viewed 25 times
View: New PagePopup • Select:BBCode
[nepathumb]36186[/nepathumb]
002.JPG
(43.35 KiB) Viewed 34 times
View: New PagePopup • Select:BBCode
[nepathumb]36187[/nepathumb]
001.JPG
(53.38 KiB) Viewed 42 times
View: New PagePopup • Select:BBCode
[nepathumb]36188[/nepathumb]
freetown fred
 
Hand Fed Coal Stove: HITZER 50-93
Coal Size/Type: BLASCHAK Nut/Stove mix

Re: What kind of paint on cement board heat shield

PostBy: samhill On: Fri Aug 24, 2012 8:09 am

How hot does the tomahawk get? :lol:
samhill
 
Hot Air Coal Stoker Furnace: keystoker 160
Hand Fed Coal Stove: hitzer 75 in garage
Stove/Furnace Make: keystoker/hitzer
Stove/Furnace Model: koker 160/ hitzer 75

Re: What kind of paint on cement board heat shield

PostBy: I'm On Fire On: Fri Aug 24, 2012 8:12 am

So Fred, is, "Thinger-Do's" a technical term? ;)

I mean, if I were to go to the store and ask for them by name I'd go to the sales person, "Umm..yeah, I'm looking for some of them thar, "Thinger-Do's". Do you have them?"

Then he'd be all like, "Oh yeah, they are over by the "What's-It's"."

And I'd be all, "HEY!! Thanks. You're a life-saver."

:lol:
I'm On Fire
 
Hand Fed Coal Stove: DS Machines DS-1600 Hot Air Circulator

Re: What kind of paint on cement board heat shield

PostBy: Rob R. On: Fri Aug 24, 2012 8:18 am

samhill wrote:How hot does the tomahawk get? :lol:


I was thinking the same thing. 8-)
Rob R.
 
Stoker Coal Boiler: EFM DF520
Hand Fed Coal Stove: Hitzer 50-93
Other Heating: Dad's 1953 EFM Highboy

Re: What kind of paint on cement board heat shield

PostBy: freetown fred On: Fri Aug 24, 2012 8:29 am

Hot enough to keep a bunch of HONKEY butt-heads out of my hair :clap: toothy OK, if we gotta get city technical, we'd ask for ceramic fenceing insulators ;)
Attachments
003.JPG
(39.79 KiB) Viewed 31 times
View: New PagePopup • Select:BBCode
[nepathumb]36189[/nepathumb]
freetown fred
 
Hand Fed Coal Stove: HITZER 50-93
Coal Size/Type: BLASCHAK Nut/Stove mix

Re: What kind of paint on cement board heat shield

PostBy: samhill On: Fri Aug 24, 2012 8:51 am

Why didn't you just say so in the first place, I don't think too many city hardware stores would stock them but you never know. They might have a big ole bin of thing-a-ma-jigs & what-cha-ma-ma-call-its t hat they will let you look thru. :shh:
samhill
 
Hot Air Coal Stoker Furnace: keystoker 160
Hand Fed Coal Stove: hitzer 75 in garage
Stove/Furnace Make: keystoker/hitzer
Stove/Furnace Model: koker 160/ hitzer 75

Re: What kind of paint on cement board heat shield

PostBy: warminmn On: Fri Aug 24, 2012 9:19 am

Yep, I got thinger-do's between the board and wall. The spacing by the wall is at 1 1/2". My insurance company was pretty happy with my setup the one time they were here. My stove is closer than yours to the board as its a close clearance stove set at an angle like yours is. Thanks for the help.
warminmn
 
Hand Fed Coal Stove: Chubby Junior, Efel Nestor Martin
Coal Size/Type: nut and stove anthracite. Soft coal
Other Heating: wood

Re: What kind of paint on cement board heat shield

PostBy: freetown fred On: Fri Aug 24, 2012 11:20 am

OK, it was eatin at me while I was out bush-hoggin--sooo, for clarification. :) I never really looked at the hatchet till right now, I just used it--butttt, it is made by PLUMB (USA) and the exact duplicate, & I mean EXACT, of a vintage E C Simmons Keen Kutter axe/hatchet--OK, enough nostalgia for this AM ;)
Attachments
002.JPG
(43.35 KiB) Viewed 16 times
View: New PagePopup • Select:BBCode
HATCHET
[nepathumb]36190[/nepathumb]
004.JPG
(51.69 KiB) Viewed 14 times
View: New PagePopup • Select:BBCode
TOMAHWK
[nepathumb]36191[/nepathumb]
005.JPG
(100.18 KiB) Viewed 14 times
View: New PagePopup • Select:BBCode
[nepathumb]36192[/nepathumb]
freetown fred
 
Hand Fed Coal Stove: HITZER 50-93
Coal Size/Type: BLASCHAK Nut/Stove mix

Re: What kind of paint on cement board heat shield

PostBy: nortcan On: Sat Aug 25, 2012 10:21 pm

warminmn wrote:My insurance company is not a problem but would be with a lot of people.

Fred, Did the rustoleum smell when you got it it hot the first couple times?

Nortcan, By water based do you mean latex? Maybe acrylic latex?

Im hoping to use a darker white color to kinda almost match my crappy 110 year old walls but dont want to have to redo it if it burns or falls off.

Im getting good advise here and thru a PM I received, thank you.

Yes, latex paint. No smell and easy to apply. The cement bord at the back of my Golden Bride is only a few inches from the stove pipe, 6"" to be precise and the inspector asked a lot of questions about the heat board, paint and WHAT was behind the cement board...I had a mini heat shield and the stuff at the back, a sort of sample to show him. He took a few pics and said well very good...
nortcan
 
Stove/Furnace Make: Stuart,Peterson/ Grander
Stove/Furnace Model: Sunnyside/ Golden Bride

Re: What kind of paint on cement board heat shield

PostBy: SteveZee On: Sun Sep 02, 2012 8:03 am

freetown fred wrote:OK, it was eatin at me while I was out bush-hoggin--sooo, for clarification. :) I never really looked at the hatchet till right now, I just used it--butttt, it is made by PLUMB (USA) and the exact duplicate, & I mean EXACT, of a vintage E C Simmons Keen Kutter axe/hatchet--OK, enough nostalgia for this AM ;)


It looks a bit like my old shingle hammer. Broadhead one side, hammer on the other and a slight channel in the bottom of the broadhead for pullin nails. Was the perfect weapon for cedar shingling. Still is!
SteveZee
 
Hand Fed Coal Stove: Glenwood Modern Oak 116 & Glenwood 208 C Range

Re: What kind of paint on cement board heat shield

PostBy: warminmn On: Sun Sep 02, 2012 9:06 am

Yesterday I put latex paint on it. It sounds like about any paint would have worked, but I had the latex here and it matches my walls, if I scrubbed my walls, lol. Thanks everyone. Nice hawk.
warminmn
 
Hand Fed Coal Stove: Chubby Junior, Efel Nestor Martin
Coal Size/Type: nut and stove anthracite. Soft coal
Other Heating: wood

Visit Hitzer Stoves

cron