Why Is/Was the Short Auger Used for Burning Pellets?

 
User avatar
grobinson2
Member
Posts: 335
Joined: Wed. Dec. 24, 2008 1:35 pm
Location: Peach Bottom, PA
Stoker Coal Boiler: EFM 520 Highboy, and EFM 520 round door
Hand Fed Coal Stove: Coalbrookdale Darby, Harman Mark III, Stratford SC100, DutchWest 288 (With Coal Insert), Coalbrookdale Severn, Hitzer 50/93, Hitzer 354 Double Door, FrancoBelge La Normandie, DS Machine Anthramax
Coal Size/Type: Rice, Buck, Pea, Nut, and Stove
Other Heating: Vermont Castings Defiant 1975 FlexBurn, Fisher Grandpa Bear, Vermont Castings DutchWest 224, Vermont Castings Defiant 1945, Ravelli RV-100 Classic, Progress Hybrid, Glenwood Wood Chip Boiler

Post by grobinson2 » Mon. Dec. 03, 2012 3:18 am

I know this is an old threat but seeing how I am trying to burn other things other then coal I thought I would set in a new post. Why is/was the short auger used for burning pellets? I have the 520 with the bin auger on it feeding prune pits and the burn is great but I get smoke out of the auger tube when the blower is on. I do not have an auger fire so I am not sure whats going on.

Thanks,
Glenn


 
User avatar
stoker-man
Verified Business Rep.
Posts: 2071
Joined: Mon. Nov. 19, 2007 9:33 pm
Location: Lehigh Valley, PA
Hand Fed Coal Boiler: 1981 efm wcb-24 in use 365 days a year
Coal Size/Type: Anthracite/Chestnut
Other Heating: Hearthstone wood stove

Post by stoker-man » Mon. Dec. 03, 2012 5:42 pm

Rice coal packs tightly. You might get smoke down the short pipe with any fuel, but with rice coal, rarely down the long pipe. If your fuel doesn't pack like coal, the fan forces the smoke through the alternate fuel. You can try reducing the air setting a little.

We mixed 50/50 coal and wood pellets, maybe 30% corn/70% coal. For the price of alternatives, coal is cheap. You MUST keep an eye on these blends when burning. If they burn too deeply in the pot, discontinue use. It is possible for wood pellets to burn backwards down the coal tube when the unit is resting. Be safe. If the pipe feels very hot, stop burning the mixture.

 
User avatar
grobinson2
Member
Posts: 335
Joined: Wed. Dec. 24, 2008 1:35 pm
Location: Peach Bottom, PA
Stoker Coal Boiler: EFM 520 Highboy, and EFM 520 round door
Hand Fed Coal Stove: Coalbrookdale Darby, Harman Mark III, Stratford SC100, DutchWest 288 (With Coal Insert), Coalbrookdale Severn, Hitzer 50/93, Hitzer 354 Double Door, FrancoBelge La Normandie, DS Machine Anthramax
Coal Size/Type: Rice, Buck, Pea, Nut, and Stove
Other Heating: Vermont Castings Defiant 1975 FlexBurn, Fisher Grandpa Bear, Vermont Castings DutchWest 224, Vermont Castings Defiant 1945, Ravelli RV-100 Classic, Progress Hybrid, Glenwood Wood Chip Boiler

Post by grobinson2 » Mon. Dec. 03, 2012 6:47 pm

Hummm... Okay. Not sure why I am getting the smoke then. Right now I have the bin auger on the unit. Burning 100% UAE rice coal. 5 teeth to 4.2 air. I sealed the auger coupler with RTV calk so that no air could get in that way either. I have a good draft and I am getting a nice uniform burn in the fire pot with a little bit of black coal visible in the middle when the blower is not on. I have about two feet of coal over the end of the auger and I get small wisps of smoke up through the coal bed. The auger tube is room tempt except where it goes into the stove and that is just slightly warm.

Thanks,
Glenn

 
User avatar
stoker-man
Verified Business Rep.
Posts: 2071
Joined: Mon. Nov. 19, 2007 9:33 pm
Location: Lehigh Valley, PA
Hand Fed Coal Boiler: 1981 efm wcb-24 in use 365 days a year
Coal Size/Type: Anthracite/Chestnut
Other Heating: Hearthstone wood stove

Post by stoker-man » Mon. Dec. 03, 2012 8:26 pm

I thought you were burning prune pits? You might have negative pressure in your stoker area, maybe caused by some other exhaust fan. Dryer? Radon fan? Another stove in the house? Basement too tight? If you have good draft at the chimney, I would think that you would have no smoke in the pipe. Clean out plate fully closed?

 
User avatar
grobinson2
Member
Posts: 335
Joined: Wed. Dec. 24, 2008 1:35 pm
Location: Peach Bottom, PA
Stoker Coal Boiler: EFM 520 Highboy, and EFM 520 round door
Hand Fed Coal Stove: Coalbrookdale Darby, Harman Mark III, Stratford SC100, DutchWest 288 (With Coal Insert), Coalbrookdale Severn, Hitzer 50/93, Hitzer 354 Double Door, FrancoBelge La Normandie, DS Machine Anthramax
Coal Size/Type: Rice, Buck, Pea, Nut, and Stove
Other Heating: Vermont Castings Defiant 1975 FlexBurn, Fisher Grandpa Bear, Vermont Castings DutchWest 224, Vermont Castings Defiant 1945, Ravelli RV-100 Classic, Progress Hybrid, Glenwood Wood Chip Boiler

Post by grobinson2 » Mon. Dec. 03, 2012 8:47 pm

For the last several weeks I switched back over to 100% coal due to the fact that I was getting smoke in my basement. With the pits I was getting a fair amount of smoke and thought that for the time being I would burn 100% coal until I had time to work with the issue at hand. My house was built the 1890's and other then replacement windows is original. The basement is not open but does have a garage door with some leaks around the edges. I do not have any other vents in the basement other then a forced hot air furnace that used to heat the other side of the house. All seals are tight on the fire box except the ash pan door and it is tight just not crank down on the handle tight. Every thing else has been sealed with rope gasket and then RTV calk.

Thanks,
Glenn

 
User avatar
stoker-man
Verified Business Rep.
Posts: 2071
Joined: Mon. Nov. 19, 2007 9:33 pm
Location: Lehigh Valley, PA
Hand Fed Coal Boiler: 1981 efm wcb-24 in use 365 days a year
Coal Size/Type: Anthracite/Chestnut
Other Heating: Hearthstone wood stove

Post by stoker-man » Mon. Dec. 03, 2012 10:00 pm

Does it smoke when your stoker is running or when it is at idle? Your other furnace...is it hooked up to a chimney which could be sucking air out of the basement?

 
User avatar
grobinson2
Member
Posts: 335
Joined: Wed. Dec. 24, 2008 1:35 pm
Location: Peach Bottom, PA
Stoker Coal Boiler: EFM 520 Highboy, and EFM 520 round door
Hand Fed Coal Stove: Coalbrookdale Darby, Harman Mark III, Stratford SC100, DutchWest 288 (With Coal Insert), Coalbrookdale Severn, Hitzer 50/93, Hitzer 354 Double Door, FrancoBelge La Normandie, DS Machine Anthramax
Coal Size/Type: Rice, Buck, Pea, Nut, and Stove
Other Heating: Vermont Castings Defiant 1975 FlexBurn, Fisher Grandpa Bear, Vermont Castings DutchWest 224, Vermont Castings Defiant 1945, Ravelli RV-100 Classic, Progress Hybrid, Glenwood Wood Chip Boiler

Post by grobinson2 » Mon. Dec. 03, 2012 10:09 pm

It only smokes when the blower fan is running. The other furnace is hooked up to another chimney that is on the other side of the house. The furnace is off but the fan is used in conjunction with a hot water to air heat exchanger that is powered by the EFM. My basement is drafty enough that I would have to have a 500 foot smoke stack to over power the draft on my EFM chimney. Also I had Harlen Martin a long time EFM repair man look over my setup right after I fired it up. He tuned my baro with his digital meter and said everything looked good. At that time I had not noticed the smoke though. When I say faint whisps I mean you have to stand there next to the bin and stare at the coal to see the small amount of smoke coming up. I have a CO detector right over the bin and it does not go off unless of course I test it. The issue is that with the prune pits I get more smoke and it stinks. My feeling is that if I can stop the smoke with using 100% coal then I should have even less smoke with the pits. That said if I am not to have any smoke with the coal then I want to find out whats going on and of course fix it. :)

Thanks again,
Glenn


 
User avatar
stoker-man
Verified Business Rep.
Posts: 2071
Joined: Mon. Nov. 19, 2007 9:33 pm
Location: Lehigh Valley, PA
Hand Fed Coal Boiler: 1981 efm wcb-24 in use 365 days a year
Coal Size/Type: Anthracite/Chestnut
Other Heating: Hearthstone wood stove

Post by stoker-man » Tue. Dec. 04, 2012 7:35 pm

I don't know how tightly prune pits pack. Think of it like this: If you had air filtering up through 1/4" tiny styro pellets or 1" pellets, you would have more air passing through the larger pellets. This may be your case. How about this possibility: Your air passes through the burner plates easier on pits because they have less mass. The added volume of air pushes back in the pipe. Did you try reducing the air setting?

 
User avatar
grobinson2
Member
Posts: 335
Joined: Wed. Dec. 24, 2008 1:35 pm
Location: Peach Bottom, PA
Stoker Coal Boiler: EFM 520 Highboy, and EFM 520 round door
Hand Fed Coal Stove: Coalbrookdale Darby, Harman Mark III, Stratford SC100, DutchWest 288 (With Coal Insert), Coalbrookdale Severn, Hitzer 50/93, Hitzer 354 Double Door, FrancoBelge La Normandie, DS Machine Anthramax
Coal Size/Type: Rice, Buck, Pea, Nut, and Stove
Other Heating: Vermont Castings Defiant 1975 FlexBurn, Fisher Grandpa Bear, Vermont Castings DutchWest 224, Vermont Castings Defiant 1945, Ravelli RV-100 Classic, Progress Hybrid, Glenwood Wood Chip Boiler

Post by grobinson2 » Tue. Dec. 04, 2012 7:52 pm

I can see what you are saying but I am getting smoke down the auger while using 100% UaE rice coal.

Thanks,
Glenn

 
User avatar
stoker-man
Verified Business Rep.
Posts: 2071
Joined: Mon. Nov. 19, 2007 9:33 pm
Location: Lehigh Valley, PA
Hand Fed Coal Boiler: 1981 efm wcb-24 in use 365 days a year
Coal Size/Type: Anthracite/Chestnut
Other Heating: Hearthstone wood stove

Post by stoker-man » Tue. Dec. 04, 2012 9:55 pm

I don't know. It has to be related to draft. To answer your original question, I used the short pipe for two reasons. It enabled me to use a small can for my changing supply of test material and I wasn't sure the pellets would make it all the way through the long pipe without turning to powder.

 
User avatar
Joeski
Member
Posts: 233
Joined: Sun. Nov. 14, 2010 12:01 am
Location: Collegeville & Stroudsburg, Pa

Post by Joeski » Tue. Dec. 04, 2012 10:00 pm

Where & how do you find that many prune pits? Do you have some serious poundage in amount of them? :?:

 
User avatar
grobinson2
Member
Posts: 335
Joined: Wed. Dec. 24, 2008 1:35 pm
Location: Peach Bottom, PA
Stoker Coal Boiler: EFM 520 Highboy, and EFM 520 round door
Hand Fed Coal Stove: Coalbrookdale Darby, Harman Mark III, Stratford SC100, DutchWest 288 (With Coal Insert), Coalbrookdale Severn, Hitzer 50/93, Hitzer 354 Double Door, FrancoBelge La Normandie, DS Machine Anthramax
Coal Size/Type: Rice, Buck, Pea, Nut, and Stove
Other Heating: Vermont Castings Defiant 1975 FlexBurn, Fisher Grandpa Bear, Vermont Castings DutchWest 224, Vermont Castings Defiant 1945, Ravelli RV-100 Classic, Progress Hybrid, Glenwood Wood Chip Boiler

Post by grobinson2 » Tue. Dec. 04, 2012 10:40 pm

Well I get them from Country Medeows in Lancaster, PA. They get them from MOTZ in Adams county. They come in raw and are processed and dried. I will pull the tube tomorrow and make sure it is installed correctly. I did check my draft today. Sucked the snicker wrapper right through the barro and up the chimney. :)

Glenn

 
User avatar
stoker-man
Verified Business Rep.
Posts: 2071
Joined: Mon. Nov. 19, 2007 9:33 pm
Location: Lehigh Valley, PA
Hand Fed Coal Boiler: 1981 efm wcb-24 in use 365 days a year
Coal Size/Type: Anthracite/Chestnut
Other Heating: Hearthstone wood stove

Post by stoker-man » Wed. Dec. 05, 2012 5:33 am

It's possible to have excellent draft at the damper and none in the boiler. I would also take the reading at the iron door. Look for neg. .02 at the door after it's been firing for a few minutes.

 
User avatar
grobinson2
Member
Posts: 335
Joined: Wed. Dec. 24, 2008 1:35 pm
Location: Peach Bottom, PA
Stoker Coal Boiler: EFM 520 Highboy, and EFM 520 round door
Hand Fed Coal Stove: Coalbrookdale Darby, Harman Mark III, Stratford SC100, DutchWest 288 (With Coal Insert), Coalbrookdale Severn, Hitzer 50/93, Hitzer 354 Double Door, FrancoBelge La Normandie, DS Machine Anthramax
Coal Size/Type: Rice, Buck, Pea, Nut, and Stove
Other Heating: Vermont Castings Defiant 1975 FlexBurn, Fisher Grandpa Bear, Vermont Castings DutchWest 224, Vermont Castings Defiant 1945, Ravelli RV-100 Classic, Progress Hybrid, Glenwood Wood Chip Boiler

Post by grobinson2 » Wed. Dec. 05, 2012 8:00 am

.02 at the door this morning.

Glenn

 
User avatar
Rob R.
Site Moderator
Posts: 17965
Joined: Fri. Dec. 28, 2007 4:26 pm
Location: Chazy, NY
Stoker Coal Boiler: EFM 520
Hand Fed Coal Stove: Chubby Jr

Post by Rob R. » Wed. Dec. 05, 2012 8:23 am

What are you using for oil on the coal? Perhaps it flashes off at a low temperature.

Also, are you sure the auger pipe is properly aligned in the pot? There is a hole in the air chamber casting, it is critical that the holes drilled in the auger pipe line up with that hole in the casting.


Post Reply

Return to “Stoker Coal Boilers Using Anthracite (Hydronic & Steam)”