I thought this was a coal forum?

Re: I thought this was a coal forum?

PostBy: inhotwater On: Sat Jan 05, 2013 9:57 am

There you go. Just as I predicted.You're calling me a lib. You don't even know me. I know your kind. I'm not going to engage in specific topics with you. I can already tell that you are a foaming at the mouth freedom fry consumer. There's a lot of bitterness spewing from you. Did you have a bad childhood experience or something? Go tend your coal stove or turn on Fox and friends or something.
inhotwater
Member
 
Posts: 27
Joined: Mon Dec 31, 2012 6:10 am
Location: Lebanon. Pennsylvania
Stove/Furnace Make: EFM
Stove/Furnace Model: DF 520


Re: I thought this was a coal forum?

PostBy: whistlenut On: Sat Jan 05, 2013 10:07 am

Easy boys.....no need for 'road rage' on the road to the coal breaker.......
Try to take a deep breath............................... and understand how much control is required to NOT beat the living crap out of some people......

PC is for Personal Computer......NOT 'Politically Correct!'!!!!!! I wish someone would make up a 'smilie' for "F-PC". I would were out the the link!!! :idea: :!: :idea: :!: :idea:
User avatar
whistlenut
State of New Hampshire Moderator
 
Posts: 2753
Joined: Sat Mar 17, 2007 6:29 pm
Location: Central NH, Concord area
Stove/Furnace Make: AA130's/AA260's,AHS 130's-260
Stove/Furnace Model: GJ 600,EFM DF520-900 VWert 600

Re: I thought this was a coal forum?

PostBy: anthony7812 On: Sat Jan 05, 2013 10:14 am

Wood'nCoal wrote:Thanks for the links, Richard. It is interesting to see the progression of the forum. I remember the last major format change, at first it was difficult to navigate, now I can't even remember what the old format was like. I have visited other forums from time to time, NEPA Crossroads is by far the most easily navigated and well presented site around.


Thier is a forum for arctic cat i am a member of, lots of great diagrams and part number and all the hoopla. IF YOU CAN FIND THEM. Hard to navigate sites prevent the full utilization of what the forum was originally brought up to be. This site is great. Doesnt get much easier. Hell Freetown can navigate this site... no pun intended fred toothy
User avatar
anthony7812
Member
 
Posts: 736
Joined: Sat Mar 12, 2011 3:04 pm
Location: Colley,Pennsylvania
Stove/Furnace Make: Harman
Stove/Furnace Model: Mark III

Re: I thought this was a coal forum?

PostBy: freetown fred On: Sat Jan 05, 2013 11:11 am

None taken anthony, hell, I've surprised myself with all this & I love my trademark smileys, it don't get no better :clap: toothy Yo Doug, I'm with you, can WE start one??????
User avatar
freetown fred
Member
 
Posts: 10132
Joined: Thu Dec 31, 2009 1:33 pm
Location: Freetown,NY 13803
Stove/Furnace Make: Hitzer
Stove/Furnace Model: 50-93

Re: I thought this was a coal forum?

PostBy: Richard S. On: Sat Jan 05, 2013 12:58 pm

Let's keep the personal comments to ourselves please.
User avatar
Richard S.
Mayor
 
Posts: 11127
Joined: Fri Oct 01, 2004 8:35 pm
Location: NEPA
Stove/Furnace Make: Van Wert
Stove/Furnace Model: VA1200

Re: I thought this was a coal forum?

PostBy: Smokeyja On: Sat Jan 05, 2013 2:02 pm

Cool History on the site Richard! I will have to name this the best forum for everything really! Coal, you got it. Tractors, you got it! Home improvement, you got it! When doing anything to my house , I think of this forum. I don't want to just talk to you coal guys about coal, I want to know how to build on to my house ! I value everyone's opinion here that much . I quit posting on the tractor forums and the car forums because they were idiot forums but I finally found a place where people have good, down to earth brains!!

I love this place!
User avatar
Smokeyja
Member
 
Posts: 975
Joined: Mon Nov 21, 2011 7:57 pm
Location: Richmond, VA.
Stove/Furnace Make: Locke Stove Co.
Stove/Furnace Model: Warm Morning 414A

Re: I thought this was a coal forum?

PostBy: titleist1 On: Sat Jan 05, 2013 2:13 pm

inhotwater wrote:There you go. Just as I predicted.You're calling me a lib. You don't even know me. I know your kind. I'm not going to engage in specific topics with you. I can already tell that you are a foaming at the mouth freedom fry consumer. There's a lot of bitterness spewing from you. Did you have a bad childhood experience or something? Go tend your coal stove or turn on Fox and friends or something.


There is so much irony in this post i started laughing out loud after i read it twice to make sure i wasn't seeing things!!


toothy
User avatar
titleist1
Member
 
Posts: 1518
Joined: Wed Nov 14, 2007 5:06 pm
Location: Cecil County, MD
Stove/Furnace Make: Harman
Stove/Furnace Model: Magnum Stoker, Mark III

Re: I thought this was a coal forum?

PostBy: inhotwater On: Sat Jan 05, 2013 2:53 pm

Wow! You read it twice ! Either you couldn't absorb that much wisdom in one pass , or your reading comprehension has a few deficiencies. Well at least you have a sense of humor and got a laugh out of it. So did I when I wrote it.
inhotwater
Member
 
Posts: 27
Joined: Mon Dec 31, 2012 6:10 am
Location: Lebanon. Pennsylvania
Stove/Furnace Make: EFM
Stove/Furnace Model: DF 520

Re: I thought this was a coal forum?

PostBy: Richard S. On: Sat Jan 05, 2013 3:21 pm

One last Time...... Everyone keep the personal comments to themselves and that means everyone.
User avatar
Richard S.
Mayor
 
Posts: 11127
Joined: Fri Oct 01, 2004 8:35 pm
Location: NEPA
Stove/Furnace Make: Van Wert
Stove/Furnace Model: VA1200

Re: I thought this was a coal forum?

PostBy: KLook On: Sat Jan 05, 2013 3:38 pm

There you go. Just as I predicted.You're calling me a lib. You don't even know me. I know your kind. I'm not going to engage in specific topics with you. I can already tell that you are a foaming at the mouth freedom fry consumer. There's a lot of bitterness spewing from you. Did you have a bad childhood experience or something? Go tend your coal stove or turn on Fox and friends or something


As this was directed at me I'll respond. My response is just look at your post, it says it all. I don't need to add anything. ;)
My apologies Richard if I said anything personal. Liberal????

Kevin
User avatar
KLook
Member
 
Posts: 1891
Joined: Sun Feb 17, 2008 2:08 pm
Location: Chattanooga, Tenn
Stove/Furnace Make: Harman (Back In Maine)
Stove/Furnace Model: VF 3000

Re: I thought this was a coal forum?

PostBy: Richard S. On: Sat Jan 05, 2013 4:32 pm

Kevin I'm not pointing fingers at anyone but my mouse pointer will be pointing at the ban button if it continues.

Keep on topic, discuss them and keep the personal comments to yourself...and again that comment is not pointed directly at anyone.
User avatar
Richard S.
Mayor
 
Posts: 11127
Joined: Fri Oct 01, 2004 8:35 pm
Location: NEPA
Stove/Furnace Make: Van Wert
Stove/Furnace Model: VA1200

Re: I thought this was a coal forum?

PostBy: tsb On: Sat Jan 05, 2013 4:36 pm

Oh no, somebody is going to get Deviled !
User avatar
tsb
Member
 
Posts: 1131
Joined: Wed Jul 30, 2008 8:38 pm
Location: Douglassville, Pa
Stove/Furnace Make: saey/LL Pioneer/Binford Boiler
Stove/Furnace Model: Hanover II/BF 2000

Re: I thought this was a coal forum?

PostBy: franco b On: Sat Jan 05, 2013 4:49 pm

If so minded I think the Flame Suite Central is for personal comments.

The site is certainly primarily about coal burning. That you can also discuss your garden or your pets or politics does not detract from that. Pick what you are interested in.
franco b
Member
 
Posts: 3262
Joined: Wed Nov 05, 2008 6:11 pm
Location: Kent CT
Stove/Furnace Make: Franco Belge
Stove/Furnace Model: 10-475

Re: I thought this was a coal forum?

PostBy: inhotwater On: Sat Jan 05, 2013 7:32 pm

O-K, Uncle ! You guys answered my original question loud and clear. Sorry if I offended anyone. I'll be a good Lib now. O-K there's nothing like a good Lib Hell, I might go out and by a couple of assault rifles just to fit in. Just Joking.
inhotwater
Member
 
Posts: 27
Joined: Mon Dec 31, 2012 6:10 am
Location: Lebanon. Pennsylvania
Stove/Furnace Make: EFM
Stove/Furnace Model: DF 520

Re: I thought this was a coal forum?

PostBy: Scottscoaled On: Sat Jan 05, 2013 10:16 pm

This is a COAL forum. Some of us have no problem finding first hand info on all our coal burning needs. That is why we are here. Along the way there has been friendships forged with coal (corny as it sounds), there has been members who came and left with coal(literally), and we have met on great coal fields to further the cause( :lol: :lol: ). We all came here looking for coal information, or a place to talk burning. Trying to keep warm and keep some green in our pockets. This COAL forum has everything from the history of the coal fields, to different manufacturers reps, to grizzled coal burners, to nuclear physicists, to rocket scientists, to airplane pilots, to heating contractors, to coal boiler installers, retailers to newbe's, to you name it! They are all here. They are from Nova Scotia to Alaska to Kentucky.

Most of us know each other by our first names.

When we entered this forum and started posting, we
A. Went to the thread that says " Introduce yourself" or
B. Posted a picture of our boiler, stove, or whatever it is that burns it. ( except the Great Sting) or
C. Both

We didn't start whining on our first post or by our eleventh. You do make an entrance. :)
Scottscoaled
Member
 
Posts: 1510
Joined: Tue Jan 08, 2008 10:51 pm
Location: Malta N.Y.
Stove/Furnace Make: Efm, ,
Stove/Furnace Model: 520x3 350 700