Keystoker KA6 4006B Wiring

johnsonfam1212 · Post by **johnsonfam1212** » Wed. Jan. 02, 2013 10:31 pm

I am trying to wire my 4006B control valve.

I had one person tell me to hook this directly to my triple aquastat thermostat or to a dump zone.

I have 3 zones, and ideally I would like to use my downstairs basement as the dump zone, I have a thermostat already wired downstairs. Can I wire both in parallel so the zone turns on for either or just stays on if the 4006B limit hits and the zone 3 is still calling?

Besides the zone 3 staying on longer or getting hotter than usual is there any problem doing such a thing? Has anyone done this, I have been searching posts for a few days and have not been able to find this question? Thanks for your help.

Post by **Rob R.** » Wed. Jan. 02, 2013 10:46 pm

Just connect a thermostat wire from the 4006B to the contacts for that zone, it can be done in parallel with an existing thermostat.

sterling40man · Post by **sterling40man** » Wed. Jan. 02, 2013 11:50 pm

As Rob said........hook your 4006B thermo wires to the same connectors as your downstairs thermo wires. That's what I did.