Keystoker 105 Ash Door Gasket Size?

Post Reply
 
User avatar
Greyhound
Member
Posts: 183
Joined: Sun. Jul. 01, 2007 1:04 am
Location: Axemann, PA (Centre County)
Hot Air Coal Stoker Stove: Keystoker 105
Coal Size/Type: Rice
Other Heating: Lenox Oil HA, Heat Pump

Post by Greyhound » Thu. Jan. 24, 2013 10:16 pm

Do any of you fine folks happen to know the door gasket size on a Keystoker 105 ash door? It may be the same size on both doors, but the other is not an issue right now. I did a fair bit of searching for the answer before asking. I have also thought about just trying to "cement" it back in place with RTV or something. Any opinion on that? How does one know that it needs replacing, other than the fact that it does not seal to the stove?

As always, thanks for your collective wisdom! It has kept the oilman at bay for years now...

Rick

 
User avatar
2001Sierra
Member
Posts: 2211
Joined: Wed. May. 20, 2009 8:09 am
Location: Wynantskill NY, 10 miles from Albany
Hot Air Coal Stoker Stove: Keystoker 90 Chimney vent
Coal Size/Type: Rice
Other Heating: Buderus Oil Boiler 3115-34

Post by 2001Sierra » Thu. Jan. 24, 2013 10:50 pm

Keystoker 90 uses 3/4 round, same doors. I used Imperial Gasket cement from True Value, nice stuff clear glue easy to use unlike the cement base stuff of the past I used. Just be careful not to stretch it when installing. Glass gasket is 1/2 flat.


 
User avatar
Greyhound
Member
Posts: 183
Joined: Sun. Jul. 01, 2007 1:04 am
Location: Axemann, PA (Centre County)
Hot Air Coal Stoker Stove: Keystoker 105
Coal Size/Type: Rice
Other Heating: Lenox Oil HA, Heat Pump

Post by Greyhound » Fri. Jan. 25, 2013 12:01 am

Good information, thanks very much!

Rick

Post Reply

Return to “Stoker Coal Furnaces & Stoves Using Anthracite (Hot Air)”