I'm installing a new Pocono Leisure Line and it says there are holes in the side of the hopper to which the thermostat should be installed. I don't have any holes on the sides of the hopper. I do have several holes on the backside of the hopper. Where does the thermostat mount and what are the extra little holes on the back of the hopper for?
The Coal-trol thermostat (white plastic box with LED) mounts on an interior wall just like a standard heating system, they recommend 20' away from stove. The holes in the back of the hopper are for the control module which is a square electrical box with a black face plate & a on-off switch.
Hi , You would want to mount on the left or right side of the back of the hopper. A little slip up in the manual, I'll need to fire the author. The extra holes are for the old adjuster that we no longer use, but still need as replacement. Jerry (author)
Coaltrol hooked right up to the back of the hopper. Plugged the other two holes which aren't being used. Magic Heat unit came yesterday, just have to get my old oil freestanding stove out, put the new coal stove in and work on the stove pipe fittings..... Then it's going to be a warm Christmas!!!