monthly coal usage for AHS130 or AA130 users,

Ok I'm heres the deal I'm crunching some numbers and looking for some grude imput from owners out there. What I need to know is the following
1: Coal used a month, give me two months and the average temp during that month
2: SqFt of house
3: Age of house
4: Any major upgrade being insulation, windows, and etc.
5: Type of radiation in house,
6: BTU load
7: Do you do domestic hot water

I don't have my aa 130 in yet . But my keystoker is burning about 1/4 ton / week .Heating about 3000sq/ft newer home radiant floor hot water . Also my domestic water . I am curious to see what #s this comes up with . Dave

Axeman-Anderson 130M:
1)50-65#/Day. Mean temp. for December= 27 deg. f.
2)2000 sq./ft.
3)home 40 yrs. old
4)added R-30 to attic, replaced windows and storms.
5)Baseboard
6)100k BTU/hr. (approx.)
7)Yes

I heat with an AA 130, back up with two Weil-Mclain 125,000 Btu gas boilers

I use about 7 tons per heating season (November to May).

My house is over 4,000 sq ft.

Built 1910.

Virtually no insulation.

Drafty

Converted gravity hot water with 6" mains and 1034 sq ft of radiation.

Primary/secondary pumping with a B&G NRF 22 Low flow pump as main system pump.

I believe my BTU load was once calculated at about 250,000.

Calling all ahs-130 and A-A 130m USERS. come on man.... How much coal are you guys using? Let's have it. Just the facts, ma'am.

U235a4 wrote:Ok I'm heres the deal I'm crunching some numbers and looking for some grude imput from owners out there. What I need to know is the following
1: Coal used a month, give me two months and the average temp during that month
2: SqFt of house
3: Age of house
4: Any major upgrade being insulation, windows, and etc.
5: Type of radiation in house,
6: BTU load
7: Do you do domestic hot water

Axeman-Anderson 130M:
1) 3/4ton (est.) Mean temp. for December= 30 deg. f.
2) 2000 sq./ft.
3) home 20 yrs. old
4) Ceiling =R-38, Walls=R-19, andersen windows
5) Cast Iron Radiators
6) 60k BTU/h at winter design temp (-20degF)
7) Yes