Auger

Auger

PostBy: StanT On: Sun Jun 02, 2013 6:32 pm

auger4.jpg
(147.67 KiB) Viewed 31 times
View: New PagePopup • Select:BBCode
[nepathumb]42352[/nepathumb]
Attachments
SDC10385.JPG
(63.37 KiB) Viewed 24 times
View: New PagePopup • Select:BBCode
[nepathumb]42353[/nepathumb]
SDC10393.JPG
(180.22 KiB) Viewed 23 times
View: New PagePopup • Select:BBCode
[nepathumb]42354[/nepathumb]
Last edited by StanT on Sun Jun 02, 2013 6:38 pm, edited 1 time in total.
StanT
 
Stove/Furnace Make: Leisureline
Stove/Furnace Model: econo1

Re: Auger

PostBy: rubicondave33 On: Sun Jun 02, 2013 6:35 pm

I like it! Been thinking about a setup here, gives me some ideas! :idea:
rubicondave33
 
Stoker Coal Boiler: EFM DF520
Coal Size/Type: Rice/Anthracite
Stove/Furnace Make: efm
Stove/Furnace Model: DF520

Re: Auger

PostBy: StanT On: Sun Jun 02, 2013 6:42 pm

2300 lb in 11 minutes off my trailer, shot for 400 rpm, works great for me.total setup was a lil less the 400$. if you can see the way i mounted motor with allthread its the way to go.
Ps my coal bin has a slanted floor so I dont shovel in there either, just open my slider door coal runs right in my homemade bucket.

Happy Heating without the shovel, Ha HA

Stan
StanT
 
Stove/Furnace Make: Leisureline
Stove/Furnace Model: econo1


Re: Auger

PostBy: waldo lemieux On: Mon Jun 03, 2013 8:33 am

Stan

Good hustle man, I want one. :notworthy: We need a wide angle shot to see the whole setup as well as some specifics on the equipment and where you got it. You trying to tease us or what? Give up the goods already :P

Waldo
waldo lemieux
 
Stove/Furnace Make: efm
Stove/Furnace Model: s-20

Re: Auger

PostBy: StanT On: Mon Jun 03, 2013 7:41 pm

Fry's
907 Bush Hollow Rd
Pennsdale, PA 17756
Phone: (570) 546-3968
Tractor supply sells one also, I got a 1 hp, only need 1/2 with reduction.


Fax: (570) 546-5940
auger1.jpg
(256.67 KiB) Viewed 14 times
View: New PagePopup • Select:BBCode
[nepathumb]42363[/nepathumb]
myauger.jpg
(127.29 KiB) Viewed 39 times
View: New PagePopup • Select:BBCode
[nepathumb]42364[/nepathumb]
StanT
 
Stove/Furnace Make: Leisureline
Stove/Furnace Model: econo1

Re: Auger

PostBy: dcrane On: Mon Jun 03, 2013 7:53 pm

Ohhhhh yes indeeedy :P Stan Da Man! hahaha. how do we build one with an old reclaimed motor & $42.00 (thats would make a great thread!)...."Smitty!" :mad:
dcrane
 
Hand Fed Coal Stove: Crane 404

Re: Auger

PostBy: StanT On: Mon Jun 03, 2013 9:08 pm

some old auger screws around but i could not find one, pvc pipe, couple of brackets, the auger screw is hard to find.
I think the auger assembly was arounf 220$ 160 for motor and i changed pulleya and belt.

Good luck everyone

Stan
StanT
 
Stove/Furnace Make: Leisureline
Stove/Furnace Model: econo1

Re: Auger

PostBy: McGiever On: Mon Jun 03, 2013 9:44 pm

Here is *StanT's* other post...auger links
McGiever
 
Stoker Coal Boiler: AXEMAN-ANDERSON 130 "1959"
Hot Air Coal Stoker Stove: HARMAN MAGNUM
Hand Fed Coal Stove: RADIANT HOME AIR BLAST
Baseburners & Antiques: OUR GLENWOOD 111 BASEBURNER "1908"
Coal Size/Type: PEA / ANTHRACITE, NUT-STOVE / ANTHRACITE
Other Heating: Ground Source Heat Pump
Stove/Furnace Make: Hydro Heat /Mega Tek