Where can I buy a bi-metal draft regulator?

Where can I buy a bi-metal draft regulator?

PostBy: JRLearned On: Thu Jul 25, 2013 11:34 pm

Where can I get a bi-metal draft regulator such as advertised on some stokers and handfired units, like on DS stoves? Im talking about the type that doesnt require electricty, but relies on the expansion coefficient of metal to regulate a damper opening.
JRLearned
 
Stove/Furnace Make: Chubby Stove
Stove/Furnace Model: FrankenChubby

Re: Where can I buy a bi-metal draft regulator?

PostBy: freetown fred On: Fri Jul 26, 2013 4:54 am

JR--what the hell is "expansion coefficient of metal"??? ya mean a friggin spring loaded thermo??? if so---call HITZER for the whole assembly----speak English for us dumb ass farmers :clap: toothy ---(260-589-8536--ask for Dean)---Where can I get a bi-metal draft regulator such as advertised on some stokers and handfired units, like on DS stoves? Im talking about the type that doesnt require electricty, but relies on the expansion coefficient of metal to regulate a damper opening.[/quote]
freetown fred
 
Hand Fed Coal Stove: HITZER 50-93
Coal Size/Type: BLASCHAK Nut/Stove mix

Re: Where can I buy a bi-metal draft regulator?

PostBy: JRLearned On: Fri Jul 26, 2013 10:59 pm

Ok...thanks... I guess :?:
JRLearned
 
Stove/Furnace Make: Chubby Stove
Stove/Furnace Model: FrankenChubby

Visit Hitzer Stoves

Re: Where can I buy a bi-metal draft regulator?

PostBy: freetown fred On: Sat Jul 27, 2013 6:38 am

What do ya mean "I guess"? Did you call Hitzer?????????????? toothy
freetown fred
 
Hand Fed Coal Stove: HITZER 50-93
Coal Size/Type: BLASCHAK Nut/Stove mix

Re: Where can I buy a bi-metal draft regulator?

PostBy: JRLearned On: Sat Jul 27, 2013 11:49 pm

I mean you were rude in your reply. Just because I don't know what something is, doesn't mean I go blasting someone for using words I don't understand.
JRLearned
 
Stove/Furnace Make: Chubby Stove
Stove/Furnace Model: FrankenChubby

Re: Where can I buy a bi-metal draft regulator?

PostBy: Lightning On: Sun Jul 28, 2013 9:11 am

JRLearned wrote:I mean you were rude in your reply. Just because I don't know what something is, doesn't mean I go blasting someone for using words I don't understand.


Fred didn't mean you any harm partner, he's a good guy :D
Lightning
 
Hand Fed Coal Furnace: Clayton 1537G
Coal Size/Type: Nut Size / White Ash

Re: Where can I buy a bi-metal draft regulator?

PostBy: coalnewbie On: Sun Jul 28, 2013 9:27 am

he's a good guy :D


So was Hitler. :D I know, it's raining and I am bored.
coalnewbie
 
Hot Air Coal Stoker Stove: LL AnthraKing 110K, Pocono110K,KStokr 90K, DVC
Hand Fed Coal Stove: Hitzer 50-93, Jotul 507
Baseburners & Antiques: Red Cross Invader 2
Coal Size/Type: Rice, Chestnut
Other Heating: Heating Oil CH, Toyotomi OM 22

Re: Where can I buy a bi-metal draft regulator?

PostBy: Lightning On: Sun Jul 28, 2013 9:29 am

coalnewbie wrote:
he's a good guy :D


So was Hitler. :D


:woot:
Lightning
 
Hand Fed Coal Furnace: Clayton 1537G
Coal Size/Type: Nut Size / White Ash

Re: Where can I buy a bi-metal draft regulator?

PostBy: freetown fred On: Sun Jul 28, 2013 9:30 am

Oh, I'm sorry JR--not very politically correct am I? --check out meanings of SMILIES--by the way,you're welcome for HITZERS phone # & contact name--don't make me come over to Olean Lightning :clap: toothy AND you Simon, are just to far away ya old horse farmer:)
JRLearned wrote:I mean you were rude in your reply. Just because I don't know what something is, doesn't mean I go blasting someone for using words I don't understand.
Last edited by freetown fred on Sun Jul 28, 2013 9:45 am, edited 1 time in total.
freetown fred
 
Hand Fed Coal Stove: HITZER 50-93
Coal Size/Type: BLASCHAK Nut/Stove mix

Re: Where can I buy a bi-metal draft regulator?

PostBy: coalnewbie On: Sun Jul 28, 2013 9:44 am

Perhaps a more serious question is, what is your application?
coalnewbie
 
Hot Air Coal Stoker Stove: LL AnthraKing 110K, Pocono110K,KStokr 90K, DVC
Hand Fed Coal Stove: Hitzer 50-93, Jotul 507
Baseburners & Antiques: Red Cross Invader 2
Coal Size/Type: Rice, Chestnut
Other Heating: Heating Oil CH, Toyotomi OM 22

Re: Where can I buy a bi-metal draft regulator?

PostBy: rberq On: Sun Jul 28, 2013 4:16 pm

JRLearned wrote:Where can I get a bi-metal draft regulator such as advertised on some stokers and handfired units, like on DS stoves?

I got one from Hitzer, like rude crude Freetown Fred suggested. (Don’t mind Fred, he’s worried about getting the hay in with all this rain, and after that’s done he’ll be nice again. Last year I called in a drone strike on him, but recalled it at the last minute when I realized he was kidding.)
Another place to try would be DS Machine. I don’t know if they would sell you the parts, though I don't see why not. The advantage is that the DS parts are all ready to bolt on, whereas the air intake tube from Hitzer does not have any flanges attached to take the bolts.
I think the phone number for DS Machine is 717-768-3853.
rberq
 
Hand Fed Coal Stove: DS Machine 1300
Coal Size/Type: Nut -- Kimmel/Blaschak/Reading
Other Heating: Oil hot water radiators, propane

Re: Where can I buy a bi-metal draft regulator?

PostBy: coalnewbie On: Sun Jul 28, 2013 4:25 pm

(Don’t mind Fred, he’s worried about getting the hay in with all this rain, and after that’s done he’ll be nice again. Last year I called in a drone strike on him, but recalled it at the last minute when I realized he was kidding.


Don't mind them Fred, central Maine as has had an Ann Landers (Miss Manners) school for years, they are just sooo delicate up there. Just keep calling a spade a spade, it is not a digging implement - geez. Now my question stands what is he going to use it on?
coalnewbie
 
Hot Air Coal Stoker Stove: LL AnthraKing 110K, Pocono110K,KStokr 90K, DVC
Hand Fed Coal Stove: Hitzer 50-93, Jotul 507
Baseburners & Antiques: Red Cross Invader 2
Coal Size/Type: Rice, Chestnut
Other Heating: Heating Oil CH, Toyotomi OM 22

Re: Where can I buy a bi-metal draft regulator?

PostBy: Lightning On: Wed Jul 31, 2013 9:47 pm

coalnewbie wrote:Don't mind them Fred, central Maine as has had an Ann Landers (Miss Manners) school for years, they are just sooo delicate up there. Just keep calling a spade a spade, it is not a digging implement - geez. Now my question stands what is he going to use it on?


Yep, done scared em off.. That's ok.. He'll be back 8-)
Lightning
 
Hand Fed Coal Furnace: Clayton 1537G
Coal Size/Type: Nut Size / White Ash

Re: Where can I buy a bi-metal draft regulator?

PostBy: I'm On Fire On: Fri Aug 02, 2013 10:50 am

JRLearned wrote:I mean you were rude in your reply. Just because I don't know what something is, doesn't mean I go blasting someone for using words I don't understand.

I didn't think Freetown was rude. I chuckled at his response. I thought it was funny.
I'm On Fire
 
Hand Fed Coal Stove: DS Machines DS-1600 Hot Air Circulator

Re: Where can I buy a bi-metal draft regulator?

PostBy: JRLearned On: Fri Aug 02, 2013 11:14 pm

You asked what I meant by "I guess" so I explained. I wasnt sure whether to thank you for the information or tell you to go jump in the lake. Expansion of metal is eighth grade earth science. Maybe you were absent that day, but most farmers ive known arent dumb asses. But I guess as long as you throw a couple smiley faces at the end, you can say whatever you want. :D :) 8-) :lol: :sick:
JRLearned
 
Stove/Furnace Make: Chubby Stove
Stove/Furnace Model: FrankenChubby

Visit Hitzer Stoves