31K GVW Int. w/7 ton Marion High Lift $10K

Forum rules
ATTN Coal Dealers: To advertise your company you're allowed to start one new topic in "Coal Prices, Coal Quality, Coal Dealer Inquiries and Reviews". You may also respond to other topics started by others where your company has been mentioned and are encouraged to do so. Any other posts just for advertising here or anywhere else on nepacrossroads.com will be considered spam and removed. Repeated violations will result in a permanent ban.

31K GVW Int. w/7 ton Marion High Lift $10K

PostBy: Richard S. On: Wed Sep 25, 2013 11:31 am

High resolution images can be downloaded here: http://nepacrossroads.com/temp/truck.zip

If you're not a forum member I can be contacted here or use the "Cantact Admin" link below.

You will not find a better lift of this size in this condition anywhere unless you get one custom made new.

Most people are familiar with the four ton lifts, everything on this is double.


Image





1978 International Loadstar DT466 Turbo 31,000 GVW

* Marion hi-lift with a 7 ton capacity the box. This is the crown jewel in this whole deal as it has not been used a lot. It actually sat in a garage for 15 years on this truck before it was purchased by me. Everything on this lift is in near perfect condition. Many have taken this same lift and put 8 to 10 boxes on them, it's that big. All the pins are tight as a drum and it has very smooth and easy lift.

* Stainless Steel lined box

* Cab, frame and all other major components are in good condition. The cab needs some minor body work and could use a paint job. There has been no body work done to this cab to date. The hood is fiberglass.

* Good tires all the way around especially the rears, the rears have about 10K on them with a lot of rubber left.

I do not know the mileage but its a lot, this was formerly the explosives truck for Northeast Energy going back to the late 70's so there was a lot of highway miles . There was some extensive motor work done on it before we purchased it but I don't know exactly what was done. I put about 50,000 on it since then. The motor runs very strong but I'll make no guarantees.


This truck can almost be put into service immediately, when I parked this truck I was using it. The only reason it got parked was because of the windshield. What it needs:
* Batteries
*Cracked windshield, I looked online and they are available. I believe the quote was $280 installed on site but you'll have to confirm that.
* Side step on drivers side.
*the pump has a small problem but I will emphasize it has nothing to do with the rams or the pump itself. This pump will stall the motor unless you give it a little throttle when you have full load, that of course is not the problem and a good thing . It will put the 7 ton up like it's not even there. The lift will sneak down, this problem existed when we bought it. It's something I had be meaning to fix just because of the inconvenience. On top of the pump is a manual valve on the hose leading to the rams that the previous owner had installed because of this issue. You have to turn this off and it won't sneak down anymore. You can have a full load on it all the way up in the air and it will stay there indefinitely once this valve is closed. My assumption is there is valve inside the pump that is malfunctioning allowing the fluid to go back into the reservoir so it should not be that expensive to fix.

Also included is brand new PTO cable as the other one is broke, some misc parts and 2 spare tires with some decent tread on them.
Attachments
DSC00551.JPG
(175.75 KiB) Viewed 110 times
View: New PagePopup • Select:BBCode
[nepathumb]43496[/nepathumb]
DSC00559.JPG
(165.76 KiB) Viewed 598 times
View: New PagePopup • Select:BBCode
[nepathumb]43497[/nepathumb]
DSC00560.JPG
(181.42 KiB) Viewed 33 times
View: New PagePopup • Select:BBCode
[nepathumb]43498[/nepathumb]
DSC00565.JPG
(174.32 KiB) Viewed 70 times
View: New PagePopup • Select:BBCode
[nepathumb]43499[/nepathumb]
DSC00567.JPG
(142.48 KiB) Viewed 33 times
View: New PagePopup • Select:BBCode
[nepathumb]43500[/nepathumb]
DSC00572.JPG
(145.3 KiB) Viewed 47 times
View: New PagePopup • Select:BBCode
[nepathumb]43501[/nepathumb]
DSC00573.JPG
(149.64 KiB) Viewed 45 times
View: New PagePopup • Select:BBCode
[nepathumb]43502[/nepathumb]
DSC00576.JPG
(169.47 KiB) Viewed 25 times
View: New PagePopup • Select:BBCode
[nepathumb]43503[/nepathumb]
Richard S.
 
Stoker Coal Boiler: Van Wert VA1200
Coal Size/Type: Buckwheat/Anthracite

Aluminum and SS Coal Chutes

PostBy: Richard S. On: Wed Sep 25, 2013 11:32 am

All shapes and sizes in varying condition, these are industrial grade and really not suitable for the homeowner. Telescoping, single chutes, and short chutes. I also have a SS chute made for those bin holes that are clay pipe. It's about 6 inches wide, 6 foot long and very deep. Fits right into the pipe.
Richard S.
 
Stoker Coal Boiler: Van Wert VA1200
Coal Size/Type: Buckwheat/Anthracite

5 ton high Lift $1500

PostBy: Richard S. On: Wed Sep 25, 2013 11:32 am

5 ton high Lift $1500


Needs a lot of work but does have a SS liner in the bed. The big issue is the cross members supporting the bed need to be replaced. The lift needs to be taken apart and thoroughly inspected. The gate on the back of the truck as pictured is nearly new.

It's on a Mercedes Benz truck which has motor in it that runs like Timex, the body is shot and would require some very extensive work and really not worth repairing.

Here's a picture as it sat in 2005.
Attachments
ourfam_261a.jpg
(206.82 KiB) Viewed 76 times
View: New PagePopup • Select:BBCode
[nepathumb]43504[/nepathumb]
Richard S.
 
Stoker Coal Boiler: Van Wert VA1200
Coal Size/Type: Buckwheat/Anthracite

Visit Lehigh Anthracite

Re: 31K GVW Int. w/7 ton High Lift $10K

PostBy: Richard S. On: Thu Sep 26, 2013 8:08 am

If you want to work out a deal for everything, some advertising here, a website etc that is possible.
Richard S.
 
Stoker Coal Boiler: Van Wert VA1200
Coal Size/Type: Buckwheat/Anthracite

Visit Lehigh Anthracite