Fumes From New Stove Pipe

 
rberq
Member
Posts: 6446
Joined: Mon. Apr. 16, 2007 9:34 pm
Location: Central Maine
Hand Fed Coal Stove: DS Machine 1300 with hopper
Coal Size/Type: Blaschak Anthracite Nut
Other Heating: Oil hot water radiators (fuel oil); propane

Post by rberq » Sun. Sep. 08, 2013 8:04 pm

New stove pipe gives off a lot of fumes during the first fire. I think I could avoid having the fumes in the house, by pre-heating the pipe in my garage or outdoors. But I don't know how to heat it. Would an inexpensive heat gun do the trick? Propane torch held not-too-close? Other suggestions?


 
grumpy
Member
Posts: 12399
Joined: Sat. Jan. 02, 2010 12:28 am

Post by grumpy » Sun. Sep. 08, 2013 8:13 pm

Burn it hot until it smokes and get it over with, thats what I do.It is a little scary thou, but It has to burn off, you can do it fast all at once or take forever. Just kill the smoke detectors first and open the windows. Unless you have another stove or 55 gal can to do it outside. A heat gun may work but I would think the heat needs to come from the inside or you could burn the paint job.

 
User avatar
freetown fred
Member
Posts: 30299
Joined: Thu. Dec. 31, 2009 12:33 pm
Location: Freetown,NY 13803
Hand Fed Coal Stove: HITZER 50-93
Coal Size/Type: BLASCHAK Nut

Post by freetown fred » Sun. Sep. 08, 2013 8:46 pm

Yep, windows & a good fan been workin for yrs & yrs--of course that was before we all became avoidance junkies--get er done rb---OR--build a big bon fire & throw the suckers in--pull em out in the morning if there's anything left--- :clap: toothy -- seriously though, that will eliminate any possible fumes in the house ;)

 
grumpy
Member
Posts: 12399
Joined: Sat. Jan. 02, 2010 12:28 am

Post by grumpy » Sun. Sep. 08, 2013 8:55 pm

Fred, I'm getting worried, you are agreeing with me too much lately.. :lol: :lol: Really, when I rebuilt my stove for the first time I did not think about the new pipe, then one day the flue temp hit about 900 degrees and all at once smoke poured off the pipe like crazy, the alarms went off, I din't know what the hell was going on the first few seconds. But after the smoke cleared and I let the stove cool off that was it, no more smell, it was kinda fun, your wife will love it.. :P :P

 
rberq
Member
Posts: 6446
Joined: Mon. Apr. 16, 2007 9:34 pm
Location: Central Maine
Hand Fed Coal Stove: DS Machine 1300 with hopper
Coal Size/Type: Blaschak Anthracite Nut
Other Heating: Oil hot water radiators (fuel oil); propane

Post by rberq » Sun. Sep. 08, 2013 9:03 pm

grumpy wrote:... smoke poured off the pipe like crazy ... it was kinda fun, your wife will love it
She's already planning to spend the smokey time SHOPPING. Not sure I can bear the expense, that's why I'm looking for an alternative. :|

 
User avatar
freetown fred
Member
Posts: 30299
Joined: Thu. Dec. 31, 2009 12:33 pm
Location: Freetown,NY 13803
Hand Fed Coal Stove: HITZER 50-93
Coal Size/Type: BLASCHAK Nut

Post by freetown fred » Sun. Sep. 08, 2013 9:05 pm

What was wrong with my alternative????????????? :?

 
grumpy
Member
Posts: 12399
Joined: Sat. Jan. 02, 2010 12:28 am

Post by grumpy » Sun. Sep. 08, 2013 9:11 pm

rberq wrote:
grumpy wrote:... smoke poured off the pipe like crazy ... it was kinda fun, your wife will love it
She's already planning to spend the smokey time SHOPPING. Not sure I can bear the expense, that's why I'm looking for an alternative. :|
LOL.. I'm not sure there is any other way. Maybe someone will chime in with an idea.. Fred''s idea would work but there goes the pretty pipe..


 
User avatar
anthony7812
Member
Posts: 5154
Joined: Sat. Mar. 12, 2011 2:04 pm
Location: Colley,Pennsylvania
Stoker Coal Boiler: VanWert VA 400
Coal Size/Type: Buck/Anthracite

Post by anthony7812 » Sun. Sep. 08, 2013 9:12 pm

Have a gas grill? Just a thought

 
grumpy
Member
Posts: 12399
Joined: Sat. Jan. 02, 2010 12:28 am

Post by grumpy » Sun. Sep. 08, 2013 9:18 pm

anthony7812 wrote:Have a gas grill? Just a thought
I was thinking some kind of an oven but its got to get pretty hot, well above 500* I would think but I don't really know.

 
grumpy
Member
Posts: 12399
Joined: Sat. Jan. 02, 2010 12:28 am

Post by grumpy » Sun. Sep. 08, 2013 9:22 pm

How about an adapter to hook up to the exhaust manifold of a truck, then burn Nitrous at high RPM... :lol: :lol: :lol:

 
User avatar
warminmn
Member
Posts: 8185
Joined: Tue. Feb. 08, 2011 5:59 pm
Location: Land of 11,842 lakes
Hand Fed Coal Stove: Chubby Junior, Riteway 37
Coal Size/Type: nut and stove anthracite, lignite
Other Heating: Wood and wear a wool shirt

Post by warminmn » Sun. Sep. 08, 2013 10:22 pm

I put my new pipes into a burning wood stove with a thick bed of coals. I don't think it will work as good without the bed of coals. I set them in for just a minute or so, then turn it over and do the same. You don't want to get them red hot, just hot. The paint will turn a faded color. That will burn most of the smell off. I do mine in my house and it works fine. Doing it outside over a fire should work fine too, or in a stove outside. If you use pipes that snap together, do that before burning them.

 
User avatar
dcrane
Verified Business Rep.
Posts: 3128
Joined: Sun. Apr. 22, 2012 9:28 am
Location: Easton, Ma.
Hand Fed Coal Stove: Crane 404

Post by dcrane » Mon. Sep. 09, 2013 1:59 am

Ohhhh common stop it!... rig that thing up, open the windows and let er rip'! people are gonna start laughing at us toothy
Use the band aid theory!

 
User avatar
anthony7812
Member
Posts: 5154
Joined: Sat. Mar. 12, 2011 2:04 pm
Location: Colley,Pennsylvania
Stoker Coal Boiler: VanWert VA 400
Coal Size/Type: Buck/Anthracite

Post by anthony7812 » Mon. Sep. 09, 2013 4:13 am

Correct me if Im wrong, say the pipe gets cured at 500. It wont smoke again until it gets over 500 right? Maybe with a gas grill I'm thinking maybe you could save some of the smoke from your house. But hey I tossed mine right on and let her rip and it wasnt all that bad. Just have a fan on and have a candle burning in a corner somewhere to help relinquish the after odor.

 
User avatar
Rick 386
Member
Posts: 2508
Joined: Mon. Jan. 28, 2008 4:26 pm
Location: Royersford, Pa
Stoker Coal Boiler: AA 260 heating both sides of twin farmhouse
Hot Air Coal Stoker Stove: LL Hyfire II w/ coaltrol in garage
Coal Size/Type: Pea in AA 260, Rice in LL Hyfire II
Other Heating: Gas fired infared at work
Contact:

Post by Rick 386 » Fri. Sep. 13, 2013 11:37 am

rberq wrote:New stove pipe gives off a lot of fumes during the first fire. I think I could avoid having the fumes in the house, by pre-heating the pipe in my garage or outdoors. But I don't know how to heat it. Would an inexpensive heat gun do the trick? Propane torch held not-too-close? Other suggestions?
You already answered your own question.

.Yep burn it in the garage connected to another stove out there. A small hand fired should do the trick. Fire it up, get it hot and let it go out. Next day or 3 go retrieve the pipes, disassemble from the garage stove and reinstall inside.

Or........ build an outdoor chimnea where you can attach pipe to it. All summer long you could be seasoning the pipes while enjoying the outdoors.

Rick

 
User avatar
SMITTY
Member
Posts: 12525
Joined: Sun. Dec. 11, 2005 12:43 pm
Location: West-Central Mass
Stoker Coal Boiler: EFM 520 Highboy
Coal Size/Type: Rice / Blaschak anthracite
Other Heating: Oil fired Burnham boiler

Post by SMITTY » Sat. Sep. 14, 2013 8:12 am

Chiminea .... that's such a funny word. Now I'll be saying that all day long and laughing at myself. Chiminea .......chiminea .........chiminea .... :funny:

Fumes are a part of running stoves. Just the way it is. Fire up some trash and let her burn off.

I managed to turn my SS pipe to a nice shade of bronze after a trip up over 900° one day. Damn that memory of mine ... knew I forgot to CLOSE something .... :gee: toothy


Post Reply

Return to “Coal Bins, Chimneys, CO Detectors & Thermostats”