EFM 25 pressure cold.

Re: EFM 25 pressure cold.

PostBy: GoodProphets On: Wed Sep 25, 2013 4:24 pm

Did you replace the high pressure relief valve?
That is on top of the boiler that releases at 30-32psi

It does not seem to be the problem,

Or are you talking about the auto fill valve?
That could be the problem.

Did you get a new well pump or anything to do with your water pressure incoming?
GoodProphets
 
Stoker Coal Boiler: EFM DF520
Coal Size/Type: Anthra Rice
Other Heating: 3 Fireplaces

Re: EFM 25 pressure cold.

PostBy: Sting On: Wed Sep 25, 2013 5:19 pm

shapechanger wrote:I don't have my hot water hooked into the system. Would the domestic coil still be the problem?


if this statement is true -- than it cannot possilbly be impacting your pressure drama

shapechanger wrote:Seems since we replaced the valve it has gotten worse. Does it matter if the pressure reducing valve is on the supply our return. Ours is on the return


It makes absolutely NO difference where you add liquid to a closed system

- Valve off the pressure reducing valve
- adjust the pressure so that the top most air bleed has about- but no less than 3 psi - you can guess it is allowed
- Record the pressure at the boiler then=IGNORE THE GAUGE ON THE BOILER - YOU HAVE CORRECT SYSTEM PRESSURE IF YOU DID THE ABOVE
- leave the PRV feed valve closed

wait 24 hours or two weeks what ever comes last

Get back to us with the pressure change! :roll:
Sting
 
Other Heating: OBSO Lennox Pulse "Air Scorcher" burning NG

Visit Hitzer Stoves