coal boiler gun

coal boiler gun

PostBy: tedr On: Fri Oct 18, 2013 7:56 pm

hi I was wondering if anyone has installed a coal boiler s-130 coal gun in a out side shed/boiler room away from main house .I am looking at a 8x8 shed but not sure about a chimney.
tedr
 

Re: coal boiler gun

PostBy: whistlenut On: Sat Oct 19, 2013 8:23 am

Yes to an outside install in a remote location with a 130, also a 260. 8 by 8 is too small in my opinion. rectangular is a better option. 8 by 12 or 16 would be easier for servicing. It will fit in a an 8 by 8, but no room for beer belly, in the off chance you have one. No room for warm storage of coal......but if that is what is there, you can deal with it. :idea:
whistlenut
 
Stoker Coal Boiler: AA130's,260's, AHS130&260's,EFM900,GJ&VanWert
Hand Fed Coal Boiler: Franks Boiler,Itasca415,NYer130,Van Wert
Hot Air Coal Stoker Furnace: Yellow Flame
Hot Air Coal Stoker Stove: Alaska-4,Keystoker-2,
Hand Fed Coal Stove: Alaska,Gibraltor,Keystone,Vc Vigilant 2
Hand Fed Coal Furnace: Van Wert, NYer's, Ford,Jensen.
Coal Size/Type: Rice,Buck,Pea,Nut&Stove
Other Heating: Oil HWBB

Re: coal boiler gun

PostBy: tedr On: Sat Oct 19, 2013 4:42 pm

thank you how did you run a chimney or how hi does it need to be?
tedr
 

Visit Lehigh Anthracite

Re: coal boiler gun

PostBy: tedr On: Tue Oct 22, 2013 8:22 pm

thank you for your help I just need an ideal on how high the chimney should go for a good draft
tedr
 

Visit Lehigh Anthracite