I need a hinge bracket for the ash pit door on my American Standard Severn model boiler. The bracket bolts on and the door attaches with pins.
Anybody have one or know where I can get one?
Severn Hinge Bracket
- imaddicted2u
- Member
- Posts: 84
- Joined: Thu. Nov. 12, 2009 3:02 pm
- Location: Cape Breton, Nova Scotia Canada
- Hand Fed Coal Boiler: American Standard Severn (1957) on bituminous
- Coal Size/Type: Unscreened-Fist sized lump to powder-Bituminous
- stovepipemike
- Member
- Posts: 1225
- Joined: Sun. Jun. 15, 2008 11:53 am
- Location: Morgantown ,Penna
Short of another reply stating "I have just that very bracket ",I think your best bet would be to fabricate one for yourself,or have a local weld shop do it for you.You might save some time by having one made,if time is a factor. Your boiler [Am Std Severn] is a good design and a tough piece of equipment to have in your basement so do the best you can manage for it. Good Luck Mike
Curwensville Heating & Plumbing should have this Curwensville Pa.
- imaddicted2u
- Member
- Posts: 84
- Joined: Thu. Nov. 12, 2009 3:02 pm
- Location: Cape Breton, Nova Scotia Canada
- Hand Fed Coal Boiler: American Standard Severn (1957) on bituminous
- Coal Size/Type: Unscreened-Fist sized lump to powder-Bituminous
LOL, you timed this response well, I had just found their contact info....I couldn't remember their name and just came across a 2009 email from them.GRATE GUY wrote:Curwensville Heating & Plumbing should have this Curwensville Pa.
- imaddicted2u
- Member
- Posts: 84
- Joined: Thu. Nov. 12, 2009 3:02 pm
- Location: Cape Breton, Nova Scotia Canada
- Hand Fed Coal Boiler: American Standard Severn (1957) on bituminous
- Coal Size/Type: Unscreened-Fist sized lump to powder-Bituminous
Thanks GRATE GUY. They had the replacement hinge in stock.GRATE GUY wrote:Curwensville Heating & Plumbing should have this Curwensville Pa.