Hi List
Back in the day (100 years ago) was there a situation any of you could envision where an Oak stove would have been a better choice than a Base Heater or Base Burner other than lower cost?
Ive been trying and I can't think of one....
Oak Vs Base Heater/Burner
- wsherrick
- Member
- Posts: 3744
- Joined: Wed. Jun. 18, 2008 6:04 am
- Location: High In The Poconos
- Hand Fed Coal Stove: Glenwood Base Heater, Crawford Base Heater
- Baseburners & Antiques: Crawford Base Heater, Glenwood, Stanley Argand
- Coal Size/Type: Chestnut, Stove Size
If you use Bituminous Coal, an Oak stove would serve the purpose better. Base Heaters are designed for Anthracite mainly even though you can put a register plate in them and burn wood temporarily. The cylinder base heaters with the internal fire pots and the big mica base burners are single fuel stoves only. Many of these stoves have been ruined by people burning wood or soft coal in them.
The Best Oaks in my opinion for Bituminous are the Hot Blast Oaks such as Germer Radiant Homes and Florence Hot Blasts.
The Best Oaks in my opinion for Bituminous are the Hot Blast Oaks such as Germer Radiant Homes and Florence Hot Blasts.
-
- Site Moderator
- Posts: 11416
- Joined: Wed. Nov. 05, 2008 5:11 pm
- Location: Kent CT
- Hand Fed Coal Stove: V ermont Castings 2310, Franco Belge 262
- Baseburners & Antiques: Glenwood Modern Oak 114
- Coal Size/Type: nut and pea
The Oak stove does not have those passages to clean out, many don't want the bother. How many used stove for sale still have the ashes from the last fire?
Low or poor draft. The Oak is right up and out without losing some draft in extended passages.
Greater simplicity of operation; they were selling to the general population and not to enthusiasts as many of the forum members are.
Low or poor draft. The Oak is right up and out without losing some draft in extended passages.
Greater simplicity of operation; they were selling to the general population and not to enthusiasts as many of the forum members are.
- dlj
- Member
- Posts: 1273
- Joined: Thu. Nov. 27, 2008 6:38 pm
- Location: Monroe, NY
- Hand Fed Coal Stove: Vermont Castings Resolute
- Baseburners & Antiques: Glenwood Baseheater #6
- Coal Size/Type: Stove coal
- Other Heating: Oil Furnace, electric space heaters
the oaks are much better burning wood than the base heaters. I would much rather burn wood in an Oak than a base burner.
Dn
Dn
-
- Member
- Posts: 456
- Joined: Fri. Jan. 06, 2012 11:11 pm
- Location: South Central CT
- Baseburners & Antiques: Magee Royal Oak; Glenwood Modern Oak 116
- Other Heating: propane
see I don't understand why that would be...if William put the wood grate in his Glenwood and kept it in direct draft wouldn't it burn wood just as well as an Oak stove? Isn't a base burner the best of both worlds?dlj wrote:the oaks are much better burning wood than the base heaters. I would much rather burn wood in an Oak than a base burner.
Dn
- dlj
- Member
- Posts: 1273
- Joined: Thu. Nov. 27, 2008 6:38 pm
- Location: Monroe, NY
- Hand Fed Coal Stove: Vermont Castings Resolute
- Baseburners & Antiques: Glenwood Baseheater #6
- Coal Size/Type: Stove coal
- Other Heating: Oil Furnace, electric space heaters
The location of the flue makes a big difference in burning wood. Even when you aren't in base burner mode the flue gases still leave the stove halfway down the back of the stove. That changes the performance of the stove burning wood. I almost sold my glenwood years ago when I was burning only wood to buy an oak. But someone gave me one so I didn't need to sell it.PJT wrote:see I don't understand why that would be...if William put the wood grate in his Glenwood and kept it in direct draft wouldn't it burn wood just as well as an Oak stove? Isn't a base burner the best of both worlds?dlj wrote:the oaks are much better burning wood than the base heaters. I would much rather burn wood in an Oak than a base burner.
Dn