flat bed [KAA2] vs sloped bed stokers

Re: flat bed [KAA2] vs sloped bed stokers

PostBy: 2001Sierra On: Wed Nov 20, 2013 10:14 pm

dave brode wrote:All,

I believe that one could modify the stoker on the Kaa2 to makes the bed slope down 5 or so degrees. The mounting flage could be repositioned/rewelded, and the top opening cut so the hopper would still fit.

Yes, I have tinkeritis. Do I need help?

Dave


Dave step away from your stoker, the rest of us can get you through this :shock:
We can get you help if you need it, :cry:
2001Sierra
 
Hot Air Coal Stoker Stove: Keystoker 90 Chimney vent
Coal Size/Type: Rice
Other Heating: Buderus Oil Boiler 3115-34
Stove/Furnace Model: Keystoker 90 Chimney Vent

Re: flat bed [KAA2] vs sloped bed stokers

PostBy: dave brode On: Wed Nov 20, 2013 11:10 pm

2001Sierra wrote:
dave brode wrote:All,

I believe that one could modify the stoker on the Kaa2 to makes the bed slope down 5 or so degrees. The mounting flage could be repositioned/rewelded, and the top opening cut so the hopper would still fit.

Yes, I have tinkeritis. Do I need help?

Dave


Dave step away from your stoker, the rest of us can get you through this :shock:
We can get you help if you need it, :cry:


Yea, yea. It's going to be cold this weekend, so maybe the urge will pass.

Hey, I have one of the bigger stoker units from a hot air furnace that someone let sit in the rain and was ruined. Maybe it'll fit? :roll:
dave brode
 
Stoker Coal Boiler: Keystoker KAA-2
Hand Fed Coal Boiler: used to have a 5 section Red Square
Coal Size/Type: rice anthracite

Visit Lehigh Anthracite