Found Perfect Shovel to Feed Coal to My Stove

 
User avatar
coalrocks
New Member
Posts: 13
Joined: Fri. Jan. 15, 2010 7:39 pm
Location: Hunterdon County NJ
Hand Fed Coal Stove: Waterford Erin Coal Sove
Coal Size/Type: Nut Anthracite
Contact:

Post by coalrocks » Sun. Jan. 05, 2014 1:21 am

20140105_011825.jpg
.JPG | 105.9KB | 20140105_011825.jpg
This is my fourth season of burning coal , One problem I always had was finding the right shovel to put coal in my hand fired stove. Every season I would go through 2 or 3 shovels, always seemed to bend and then break. This year I bought an 38 oz. Aluminum ice scoop..works great. Just wondering what kinda shovel others are using.


 
grumpy
Member
Posts: 12406
Joined: Sat. Jan. 02, 2010 12:28 am

Post by grumpy » Sun. Jan. 05, 2014 1:39 am

Yep, I use one just like it..

 
User avatar
DennisH
Member
Posts: 336
Joined: Mon. Feb. 21, 2011 8:35 am
Location: Escanaba, MI
Hand Fed Coal Furnace: Yukon-Eagle Klondike IV
Other Heating: Propane

Post by DennisH » Sun. Jan. 05, 2014 7:39 am

Me too. Got mine at GFS (Gordon Food Service) and it works great. Is basically indestructible! Had it for four years. :D

 
User avatar
jjs777_fzr
Member
Posts: 190
Joined: Wed. Jan. 07, 2009 8:17 pm
Location: Northshore Massachusetts
Hand Fed Coal Stove: Penn Coal Stove & Chubby
Other Heating: CFM Wood Stove & Englander 25-PDVC Pellet Stove

Post by jjs777_fzr » Sun. Jan. 05, 2014 7:46 am

I think this is a grain shovel.
IMG_1341.JPG
.JPG | 173.5KB | IMG_1341.JPG
IMG_1342.JPG
.JPG | 179.2KB | IMG_1342.JPG

 
User avatar
Sunny Boy
Member
Posts: 25722
Joined: Mon. Nov. 11, 2013 1:40 pm
Location: Central NY
Hand Fed Coal Boiler: Anthracite Industrial, domestic hot water heater
Baseburners & Antiques: Glenwood range 208, # 6 base heater, 2 Modern Oak 118.
Coal Size/Type: Nuts !
Other Heating: Oil &electric plenum furnace

Post by Sunny Boy » Sun. Jan. 05, 2014 8:16 am

Eight heating seasons now, I've used one of these cheap, stamped sheet metal ones I bought at my local hardware store. Bent it once with too rough use trying to pry something loose. Straightened it by just bending it back over my knee.

What kind of shovels are you buying that you go through a few a year ? There're not the ones that come with a round plastic pail with pictures of fish and crabs on them are they ? :shock:

Paul

Attachments

DSCN2924.JPG
.JPG | 217.1KB | DSCN2924.JPG

 
Vermonster
Member
Posts: 101
Joined: Sun. Dec. 15, 2013 5:26 pm
Location: Bellows Falls, VT
Hand Fed Coal Stove: Surdiac Gotha 713 Rest in peace! Chubby Coal Stove
Coal Size/Type: anthracite nut coal
Other Heating: oil boiler

Post by Vermonster » Sun. Jan. 05, 2014 9:20 am

Same shovel I use sunny boy. Its an old ash shovel my pops gave to me .

 
User avatar
michaelanthony
Member
Posts: 4550
Joined: Sat. Nov. 22, 2008 10:42 pm
Location: millinocket,me.
Hand Fed Coal Stove: Vigilant 2310, gold marc box stove
Hand Fed Coal Furnace: Gold Marc Independence
Baseburners & Antiques: Home Sparkle 12
Coal Size/Type: 'nut
Other Heating: Fujitsu mini split, FHA oil furnace

Post by michaelanthony » Sun. Jan. 05, 2014 9:33 am

[quote="Sunny Boy"]Eight heating seasons now, I've used one of these cheap, stamped sheet metal ones I bought at my local hardware store. Bent it once with too rough use trying to pry something loose. Straightened it by just bending it back over my knee.

What kind of shovels are you buying that you go through a few a year ? There're not the ones that come with a round plastic pail with pictures of fish and crabs on them are they ? :shock:

Paul[/quote]
[quote="Vermonster"]Same shovel I use sunny boy. Its an old ash shovel my pops gave to me .[/quote]

Ditto...same one, if I use it at all I just use the tipping mechanism on the coal hod! :)


 
User avatar
Photog200
Member
Posts: 2063
Joined: Tue. Feb. 05, 2013 7:11 pm
Location: Fulton, NY
Baseburners & Antiques: Colonial Clarion cook stove, Kineo #15 base burner & 2 Geneva Oak Andes #517's
Coal Size/Type: Blaschak Chestnut
Other Heating: Electric Baseboard

Post by Photog200 » Sun. Jan. 05, 2014 9:45 am

I have the grain scoop and the aluminum one as well. Bought the aluminum one at a restaurant supply store too. The grain scoop one was already starting to loosen up at the rivets so that is why I bought the aluminum one. I have two smaller ones in the house...the big one is out in the coal bin.
Randy

 
User avatar
coalrocks
New Member
Posts: 13
Joined: Fri. Jan. 15, 2010 7:39 pm
Location: Hunterdon County NJ
Hand Fed Coal Stove: Waterford Erin Coal Sove
Coal Size/Type: Nut Anthracite
Contact:

Post by coalrocks » Sun. Jan. 05, 2014 12:16 pm

Sunny Boy wrote:Eight heating seasons now, I've used one of these cheap, stamped sheet metal ones I bought at my local hardware store. Bent it once with too rough use trying to pry something loose. Straightened it by just bending it back over my knee.

What kind of shovels are you buying that you go through a few a year ? There're not the ones that come with a round plastic pail with pictures of fish and crabs on them are they ? :shock:

Paul

Yes had you know, no I used the same one you use. The cheap ones from the big home improvement stores.

 
JohnB
Member
Posts: 528
Joined: Sat. Jul. 06, 2013 6:06 pm
Location: Northeastern Ct.
Hand Fed Coal Stove: Hitzer 50-93
Coal Size/Type: Mostly nut, some pea

Post by JohnB » Sun. Jan. 05, 2014 12:49 pm

I use a thick aluminum grain scoop similar to the scoop in Coalrock's photo only deeper & with a beefier handle. Our Tractor Supply coal hod came with one of the cheap sheetmetal shovels but it was useless for scooping coal out of the bags as the handle bent easily. It is however very handy for scooping out the stray ash in the ash pan area.

 
User avatar
Sunny Boy
Member
Posts: 25722
Joined: Mon. Nov. 11, 2013 1:40 pm
Location: Central NY
Hand Fed Coal Boiler: Anthracite Industrial, domestic hot water heater
Baseburners & Antiques: Glenwood range 208, # 6 base heater, 2 Modern Oak 118.
Coal Size/Type: Nuts !
Other Heating: Oil &electric plenum furnace

Post by Sunny Boy » Sun. Jan. 05, 2014 12:53 pm

coalrocks wrote:
Sunny Boy wrote:Eight heating seasons now, I've used one of these cheap, stamped sheet metal ones I bought at my local hardware store. Bent it once with too rough use trying to pry something loose. Straightened it by just bending it back over my knee.

What kind of shovels are you buying that you go through a few a year ? There're not the ones that come with a round plastic pail with pictures of fish and crabs on them are they ? :shock:

Paul

Yes had you know, no I used the same one you use. The cheap ones from the big home improvement stores.
You got some tough coal down there in Jersey ! :shock:

Paul

 
User avatar
dlj
Member
Posts: 1273
Joined: Thu. Nov. 27, 2008 6:38 pm
Location: Monroe, NY
Hand Fed Coal Stove: Vermont Castings Resolute
Baseburners & Antiques: Glenwood Baseheater #6
Coal Size/Type: Stove coal
Other Heating: Oil Furnace, electric space heaters

Post by dlj » Sun. Jan. 05, 2014 4:34 pm

I only use a shovel to clean ashes that fall outside my ash pan. I pour coal into the stove straight from my hod. Why do you have to use a shovel? Just wondering...

dj

 
User avatar
Photog200
Member
Posts: 2063
Joined: Tue. Feb. 05, 2013 7:11 pm
Location: Fulton, NY
Baseburners & Antiques: Colonial Clarion cook stove, Kineo #15 base burner & 2 Geneva Oak Andes #517's
Coal Size/Type: Blaschak Chestnut
Other Heating: Electric Baseboard

Post by Photog200 » Sun. Jan. 05, 2014 5:09 pm

dlj wrote:I only use a shovel to clean ashes that fall outside my ash pan. I pour coal into the stove straight from my hod. Why do you have to use a shovel? Just wondering...

dj
I have to use a scoop/shovel because my load door is only 8". If I load directly from the hod, it spills all over the floor.
Randy

 
User avatar
Sunny Boy
Member
Posts: 25722
Joined: Mon. Nov. 11, 2013 1:40 pm
Location: Central NY
Hand Fed Coal Boiler: Anthracite Industrial, domestic hot water heater
Baseburners & Antiques: Glenwood range 208, # 6 base heater, 2 Modern Oak 118.
Coal Size/Type: Nuts !
Other Heating: Oil &electric plenum furnace

Post by Sunny Boy » Sun. Jan. 05, 2014 5:42 pm

Photog200 wrote:
dlj wrote:I only use a shovel to clean ashes that fall outside my ash pan. I pour coal into the stove straight from my hod. Why do you have to use a shovel? Just wondering...

dj
I have to use a scoop/shovel because my load door is only 8". If I load directly from the hod, it spills all over the floor.
Randy
Ditto.

Only 8 inch diameter openings in my kitchen range.

And lifting a full coal hod up higher than a kitchen range stove top can be an adventure. As you all know, nut coal doesn't pore easily and uniformly like sand. :oops:

Tip it, the coal doesn't pour, tip more - still no pour. Tip a bit more ,. . . COAL AVALANCH, . . all over the hot stove top! :shock: Then I have to quickly use the shovel to get all the coal off that very hot stove top before it starts to heat up and outgas. Phew ! :shock:

Either way I have to use the shovel. One way, at least I'm not trying to carefully tip 30+ pounds of coal hod over a hot stove ! :roll:

Paul

 
User avatar
michaelanthony
Member
Posts: 4550
Joined: Sat. Nov. 22, 2008 10:42 pm
Location: millinocket,me.
Hand Fed Coal Stove: Vigilant 2310, gold marc box stove
Hand Fed Coal Furnace: Gold Marc Independence
Baseburners & Antiques: Home Sparkle 12
Coal Size/Type: 'nut
Other Heating: Fujitsu mini split, FHA oil furnace

Post by michaelanthony » Sun. Jan. 05, 2014 6:29 pm

[quote="Photog200"]
I have to use a scoop/shovel because my load door is only 8". If I load directly from the hod, it spills all over the floor.
Randy[/quote]

oh oh Randy don't you bring the coal hod with you when you go stove shopping? That deserves a spot on Chris Berman's Com'on Man :lol: Time for a bigger stove! :funny: :rofl:


Post Reply

Return to “Hand Fired Coal Stoves & Furnaces Using Anthracite”