I just took off my sweat band
You want it
only if it could help of cource.
Water Leaks at Threads.
Yup.Rob R. wrote:When you reassemble, use tape + GRRIP pipe dope.
5 boiler installs and many small jobs with GRRIP, not one leak.
Hercules "Grrip" or Hercules "Blue Block"
I've used both, both are excellent. A friend who worked for exxon as a pipefitter for many years in AK swears by blue block, so I've been using it more lately. My opinion is that Grrip is slightly easier to disassemble after it sets up than Blue Block, but, they both work great.
- CoalisCoolxWarm
- Member
- Posts: 2323
- Joined: Wed. Jan. 19, 2011 11:41 am
- Location: Western PA
- Stoker Coal Boiler: Keystoker KA-6
- Hand Fed Coal Furnace: old Sears rebuilt, bituminous- offline as of winter 2014
- Coal Size/Type: Anthracite Buckwheat
- Other Heating: Oil Boiler
I'll throw a tip in here.
Use a wire brush on every set of threads you can, especially larger diameters, and wipe with a rag before applying any dope or tapes.
Use a wire brush on every set of threads you can, especially larger diameters, and wipe with a rag before applying any dope or tapes.