WL110 or LL Stoker Stove/ Trying to Decide

Post Reply
 
User avatar
johnjoseph
Member
Posts: 9299
Joined: Mon. Sep. 15, 2014 6:05 pm
Location: Aroostook County, Maine
Stoker Coal Boiler: Keystoker KA-6
Other Heating: pellet stove, oil boiler

Post by johnjoseph » Mon. Sep. 29, 2014 12:25 pm

Hi all...I'm sold on the Leisure line products! However, I'm wondering if it would make sense to go one way or the other with a stoker stove or the WL-110? Had an outdoor wood boiler for 10 years and just can keep burning 20 cords of wood a year. So, this winter it's back to oil! :mad: All thoughts and opinions accepted! :)

 
User avatar
tsb
Member
Posts: 2621
Joined: Wed. Jul. 30, 2008 8:38 pm
Location: Douglassville, Pa
Stoker Coal Boiler: Binford 2000
Hot Air Coal Stoker Stove: LL Pioneer top vent
Hand Fed Coal Stove: Saey Hanover II
Baseburners & Antiques: Grander Golden Oak , Glenwood # 6
Coal Size/Type: All of them

Post by tsb » Mon. Sep. 29, 2014 1:15 pm

Get the boiler, get some coal, done !
Last edited by tsb on Mon. Sep. 29, 2014 2:58 pm, edited 1 time in total.

 
titleist1
Member
Posts: 5226
Joined: Wed. Nov. 14, 2007 4:06 pm

Post by titleist1 » Mon. Sep. 29, 2014 1:49 pm

I haven't read your other posts to see if you have described your heat load elsewhere. 20 cords of wood translates to many, many tons of coal. Absent other info, based on your wood usage I would question if a 110 would provide enough BTU's for your application.

What is the heat load you are trying to solve? What size unit is your oil boiler and how much oil have you gone through previously?

 
User avatar
johnjoseph
Member
Posts: 9299
Joined: Mon. Sep. 15, 2014 6:05 pm
Location: Aroostook County, Maine
Stoker Coal Boiler: Keystoker KA-6
Other Heating: pellet stove, oil boiler

Post by johnjoseph » Mon. Sep. 29, 2014 1:56 pm

titleist1 wrote:I haven't read your other posts to see if you have described your heat load elsewhere. 20 cords of wood translates to many, many tons of coal. Absent other info, based on your wood usage I would question if a 110 would provide enough BTU's for your application.

What is the heat load you are trying to solve? What size unit is your oil boiler and how much oil have you gone through previously?
The 20 cords was too heat 3 homes...now I want to go to a single unit to heat 1 home that is 10 years old...and I have a peerless oil boiler that is power vented


 
kstills
Member
Posts: 637
Joined: Tue. Jan. 18, 2011 6:41 am
Location: New Britain, PA
Stoker Coal Boiler: WL 110

Post by kstills » Mon. Sep. 29, 2014 2:39 pm

IIRC, the costs of the stove vs. the boiler installation (unit + install) was not that significant (maybe 1k). That made the boiler a much better option for me: it's in the basement, so is the coal, so is any (ahem) mess and I get even heat throughout the house.

I was burning oil so when I went to coal I both improved the living conditions of my house in winter (I could run higher temperatures) and saved money.

If you want opinions, I would suggest that the best long term option is to install the boiler.

 
User avatar
johnjoseph
Member
Posts: 9299
Joined: Mon. Sep. 15, 2014 6:05 pm
Location: Aroostook County, Maine
Stoker Coal Boiler: Keystoker KA-6
Other Heating: pellet stove, oil boiler

Post by johnjoseph » Mon. Sep. 29, 2014 2:47 pm

kstills wrote:IIRC, the costs of the stove vs. the boiler installation (unit + install) was not that significant (maybe 1k). That made the boiler a much better option for me: it's in the basement, so is the coal, so is any (ahem) mess and I get even heat throughout the house.

I was burning oil so when I went to coal I both improved the living conditions of my house in winter (I could run higher temperatures) and saved money.

If you want opinions, I would suggest that the best long term option is to install the boiler.
I'm Thinking I can just remove my peerless boiler and put the wl110 right in the same spot using all of my current set up...or at least I hope!

 
User avatar
blrman07
Member
Posts: 2383
Joined: Mon. Sep. 27, 2010 3:39 pm
Location: Tupelo Mississippi

Post by blrman07 » Mon. Sep. 29, 2014 3:37 pm

buy boiler.....buy coal....burn coal.....leave oil boiler for backup.....

No Problems

 
User avatar
lsayre
Member
Posts: 21781
Joined: Wed. Nov. 23, 2005 9:17 pm
Location: Ohio
Stoker Coal Boiler: AHS S130 Coal Gun
Coal Size/Type: Lehigh Anthracite Pea
Other Heating: Resistance Boiler (13.5 KW), ComfortMax 75

Post by lsayre » Mon. Sep. 29, 2014 5:13 pm

Before you started burning 20 full cords of wood per year, how many gallons of oil did you burn annually?


 
User avatar
Rob R.
Site Moderator
Posts: 18004
Joined: Fri. Dec. 28, 2007 4:26 pm
Location: Chazy, NY
Stoker Coal Boiler: EFM 520
Hand Fed Coal Stove: Chubby Jr

Post by Rob R. » Mon. Sep. 29, 2014 7:04 pm

Economics aside, the stoker stove will heat part of the house and the boiler will heat all of it and provide domestic hot water.

If there is room in the basement I would consider adding the coal boiler to the existing Peerless unit.

 
User avatar
johnjoseph
Member
Posts: 9299
Joined: Mon. Sep. 15, 2014 6:05 pm
Location: Aroostook County, Maine
Stoker Coal Boiler: Keystoker KA-6
Other Heating: pellet stove, oil boiler

Post by johnjoseph » Tue. Sep. 30, 2014 8:07 am

lsayre wrote:Before you started burning 20 full cords of wood per year, how many gallons of oil did you burn annually?
700 gallons

 
User avatar
Rob R.
Site Moderator
Posts: 18004
Joined: Fri. Dec. 28, 2007 4:26 pm
Location: Chazy, NY
Stoker Coal Boiler: EFM 520
Hand Fed Coal Stove: Chubby Jr

Post by Rob R. » Tue. Sep. 30, 2014 9:06 am

Nice. 4-5 tons of coal and you will be toasty warm.

 
jeff216410
Member
Posts: 64
Joined: Wed. Oct. 20, 2010 11:51 am

Post by jeff216410 » Wed. Oct. 01, 2014 12:03 pm

Go with the boiler. I bought a stove first then when my burnham boiler combustion chamber began eroding and needing replacement, I bought the boiler. Works great, lots of heat and hot water. I burn coal year round.

Post Reply

Return to “Coal News & General Coal Discussions”