Just Picked up a New Stove. Harman Mark III
I just got a "new" to me Harman Mark III stove. It wasn't in terrible shape but needed some things. I did notice that the one grates was bowed a bit so I ran to Stoves and Stuff to see if I can get a new one and the guy said that Harman sold it's coal line to another company and can't get parts. Anyone hear any of this? Where can I get a new grate?
I have not heard of the sale. That would be horrible if we cannot get parts anymore.JoePA wrote:I just got a "new" to me Harman Mark III stove. It wasn't in terrible shape but needed some things. I did notice that the one grates was bowed a bit so I ran to Stoves and Stuff to see if I can get a new one and the guy said that Harman sold it's coal line to another company and can't get parts. Anyone hear any of this? Where can I get a new grate?
As Aaron Rodgers said...R=E=L=A=X......and use the search feature.....
AHS bought them.....talked about in this thread a while back......probably be a huge improvement in customer service
AHS Purchases Coal Stove Lineup From Harman!
AHS bought them.....talked about in this thread a while back......probably be a huge improvement in customer service
AHS Purchases Coal Stove Lineup From Harman!
- freetown fred
- Member
- Posts: 30302
- Joined: Thu. Dec. 31, 2009 12:33 pm
- Location: Freetown,NY 13803
- Hand Fed Coal Stove: HITZER 50-93
- Coal Size/Type: BLASCHAK Nut
Damn T, ya beat me again--I gotta be getting old Of course I'm not smart enough to drag that link--ANYWHERE
- Hambden Bob
- Member
- Posts: 8551
- Joined: Mon. Jan. 04, 2010 10:54 am
- Location: Hambden Twp. Geauga County,Ohio
- Hot Air Coal Stoker Stove: Harman 1998 Magnum Stoker
- Hand Fed Coal Stove: Blower Model Coal Chubby 1982-Serial#0097
- Coal Size/Type: Rice-A-Roni ! / Nut
- Other Heating: Pro-Pain Forced Air
Cripes,Fred...Your Link's been dragged all over the World,you Modest 'Ol Cow Puncher! Anywhoo,,,....As My Esteemed Colleagues And Coal Associates have said,Relax! Alternative Heating Systems has picked up the Tattered Remnants(AS far as Models that were still being Produced) of the Harman Line! Let's see what they'll be up to as they get up to Full Steam and get things going. Check our AHS Section here,and you'll find that they'll soon be known by the name of Legacy...Kinda' Fitting to Dane Harman....
- SMITTY
- Member
- Posts: 12526
- Joined: Sun. Dec. 11, 2005 12:43 pm
- Location: West-Central Mass
- Stoker Coal Boiler: EFM 520 Highboy
- Coal Size/Type: Rice / Blaschak anthracite
- Other Heating: Oil fired Burnham boiler
Holy crap! $170 EACH??? Glad mine are still good - there's 3 in the Mark III!Lightning wrote:http://www.stove-parts-unlimited.com/Harman-Coal- ... -00211.htm
- 2001Sierra
- Member
- Posts: 2211
- Joined: Wed. May. 20, 2009 8:09 am
- Location: Wynantskill NY, 10 miles from Albany
- Hot Air Coal Stoker Stove: Keystoker 90 Chimney vent
- Coal Size/Type: Rice
- Other Heating: Buderus Oil Boiler 3115-34
That's old man for Cut and Pastefreetown fred wrote:Damn T, ya beat me again--I gotta be getting old Of course I'm not smart enough to drag that link--ANYWHERE
This reply is gonna hurt
I'm not stressed so no need to RELAX. When I went for the part he seemed like the one that was stressed and acted like this just happen because he said I can't get parts for it till next year. This is why I didnt use the search button as it seemed like it just happened.
- freetown fred
- Member
- Posts: 30302
- Joined: Thu. Dec. 31, 2009 12:33 pm
- Location: Freetown,NY 13803
- Hand Fed Coal Stove: HITZER 50-93
- Coal Size/Type: BLASCHAK Nut
JP, I think you'd be surprised what kind of stuff shows up here on OUR FORUM search tab compared to the outlet shops--sometimes the actual part, more oft then not some direction
- freetown fred
- Member
- Posts: 30302
- Joined: Thu. Dec. 31, 2009 12:33 pm
- Location: Freetown,NY 13803
- Hand Fed Coal Stove: HITZER 50-93
- Coal Size/Type: BLASCHAK Nut
OLD MAN????? listen here ya young woodpecker yep, it's early S
That's old man for Cut and Paste
This reply is gonna hurt [/quote]
That's old man for Cut and Paste
This reply is gonna hurt [/quote]