Is There Any Stove Made With a Hopper That Can Use BIT Coal?
-
- Member
- Posts: 253
- Joined: Wed. Apr. 16, 2014 8:40 pm
- Hand Fed Coal Stove: Hotblast 1557
- Coal Size/Type: Run of the mine
Just wondering if there is a gravity feed hopper setup on any modern stove that u can use with BIT coal. I liked the DS machines but I read u can only bit without the hopper. I have no problem shaking ashes out every 12 hrs or as needed, and I have no problems dealing with the soot or the smoke. Just looking for the convenience of a hopper
- lsayre
- Member
- Posts: 21781
- Joined: Wed. Nov. 23, 2005 9:17 pm
- Location: Ohio
- Stoker Coal Boiler: AHS S130 Coal Gun
- Coal Size/Type: Lehigh Anthracite Pea
- Other Heating: Resistance Boiler (13.5 KW), ComfortMax 75
To my knowledge there is no way to design a hand fired stove with hopper assist that can safely burn bituminous coal (or any other grade other than anthracite).Jared43758 wrote:Just wondering if there is a gravity feed hopper setup on any modern stove that u can use with BIT coal. I liked the DS machines but I read u can only bit without the hopper. I have no problem shaking ashes out every 12 hrs or as needed, and I have no problems dealing with the soot or the smoke. Just looking for the convenience of a hopper
-
- Member
- Posts: 253
- Joined: Wed. Apr. 16, 2014 8:40 pm
- Hand Fed Coal Stove: Hotblast 1557
- Coal Size/Type: Run of the mine
-
- Member
- Posts: 253
- Joined: Wed. Apr. 16, 2014 8:40 pm
- Hand Fed Coal Stove: Hotblast 1557
- Coal Size/Type: Run of the mine
-
- Member
- Posts: 253
- Joined: Wed. Apr. 16, 2014 8:40 pm
- Hand Fed Coal Stove: Hotblast 1557
- Coal Size/Type: Run of the mine
I talked to the company and I guess they haven't made a coal stove since 1982
- davidmcbeth3
- Member
- Posts: 8505
- Joined: Sun. Jun. 14, 2009 2:31 pm
- Coal Size/Type: nut/pea/anthra
my hitzer 503 has a hopper ... but can only be used for anthracite ... want to burn bit...remove the hopper...
- wsherrick
- Member
- Posts: 3744
- Joined: Wed. Jun. 18, 2008 6:04 am
- Location: High In The Poconos
- Hand Fed Coal Stove: Glenwood Base Heater, Crawford Base Heater
- Baseburners & Antiques: Crawford Base Heater, Glenwood, Stanley Argand
- Coal Size/Type: Chestnut, Stove Size
To directly answer your question; no there aren't any stoves made today that are good at burning Bituminous coal much less one with a magazine that would.
-
- Member
- Posts: 253
- Joined: Wed. Apr. 16, 2014 8:40 pm
- Hand Fed Coal Stove: Hotblast 1557
- Coal Size/Type: Run of the mine
FALSEwsherrick wrote:To directly answer your question; no there aren't any stoves made today that are good at burning Bituminous coal much less one with a magazine that would.
- wsherrick
- Member
- Posts: 3744
- Joined: Wed. Jun. 18, 2008 6:04 am
- Location: High In The Poconos
- Hand Fed Coal Stove: Glenwood Base Heater, Crawford Base Heater
- Baseburners & Antiques: Crawford Base Heater, Glenwood, Stanley Argand
- Coal Size/Type: Chestnut, Stove Size
Burning something period versus burning something properly and efficiently are two VERY different things. Again there are NO modern stoves made to burn Bituminous Coal very efficiently. Sorry those are just the facts.Jared43758 wrote:FALSEwsherrick wrote:To directly answer your question; no there aren't any stoves made today that are good at burning Bituminous coal much less one with a magazine that would.
-
- Member
- Posts: 253
- Joined: Wed. Apr. 16, 2014 8:40 pm
- Hand Fed Coal Stove: Hotblast 1557
- Coal Size/Type: Run of the mine
Wrong
-
- Site Moderator
- Posts: 11417
- Joined: Wed. Nov. 05, 2008 5:11 pm
- Location: Kent CT
- Hand Fed Coal Stove: V ermont Castings 2310, Franco Belge 262
- Baseburners & Antiques: Glenwood Modern Oak 114
- Coal Size/Type: nut and pea
That answer does not educate us very much. Why not tell us how you burn bit coal cleanly and efficiently?Jared43758 wrote:Wrong
- Sunny Boy
- Member
- Posts: 25728
- Joined: Mon. Nov. 11, 2013 1:40 pm
- Location: Central NY
- Hand Fed Coal Boiler: Anthracite Industrial, domestic hot water heater
- Baseburners & Antiques: Glenwood range 208, # 6 base heater, 2 Modern Oak 118.
- Coal Size/Type: Nuts !
- Other Heating: Oil &electric plenum furnace
Agreed. They are many on this board that are near bit suppliers. Considering the cost difference between anthracite and bit, I'm sure they would be interested to know if there are new stoves available that are efficient to reap the cost savings.franco b wrote:That answer does not educate us very much. Why not tell us how you burn bit coal cleanly and efficiently?Jared43758 wrote:Wrong
Paul
-
- Member
- Posts: 253
- Joined: Wed. Apr. 16, 2014 8:40 pm
- Hand Fed Coal Stove: Hotblast 1557
- Coal Size/Type: Run of the mine
Myself, I'm sure I don't burn bit that great at all using a poor design cheap stove. My meaning was even if it's not in the USA, other countries all over the world make stoves to burn soft coal. Surely one could not believe there is not a single stove made in the whole world that does not burn Bit efficiently
- warminmn
- Member
- Posts: 8193
- Joined: Tue. Feb. 08, 2011 5:59 pm
- Location: Land of 11,842 lakes
- Hand Fed Coal Stove: Chubby Junior, Riteway 37
- Coal Size/Type: nut and stove anthracite, lignite
- Other Heating: Wood and wear a wool shirt
This is not aimed at anyone but a general question. What efficiency are we talking about as being good? Ive read figures all over the place with ant and 80% is a high figure for modern hand fed ant burners it seems, with antiques running higher. So what about bit?