Converting a Pocono Top Vent to Back Vent?
- Turbogeno
- Member
- Posts: 121
- Joined: Thu. May. 15, 2014 6:58 pm
- Location: Lake George, NY
- Hot Air Coal Stoker Stove: LL Pocono
- Hand Fed Coal Stove: VC Vigilant II at home and a military surplus tent heater at camp
- Coal Size/Type: Anthracite, Rice and Nut
- Other Heating: Oil hot water baseboard and DHW
I looked on the Fasco website but it seems they don't make a "left handed" fan. It's a tight fit for sure.
From the cameras perspective, the right side of the stove is 7" from the right side of the pipe, the left side is 8 9/16" from the left side of the pipe and the bottom was a little hard to see but the bottom of the stove is about 1 3/4" from the bottom of the pipe.
From the cameras perspective, the right side of the stove is 7" from the right side of the pipe, the left side is 8 9/16" from the left side of the pipe and the bottom was a little hard to see but the bottom of the stove is about 1 3/4" from the bottom of the pipe.
Attachments
-
- Member
- Posts: 48
- Joined: Tue. Nov. 04, 2014 11:58 am
- Location: Mass
- Hot Air Coal Stoker Stove: None Yet
- Other Heating: FHW Oil
Thank you for the fantastic pics. Now I know what I am up against.Turbogeno wrote:I looked on the Fasco website but it seems they don't make a "left handed" fan. It's a tight fit for sure.
From the cameras perspective, the right side of the stove is 7" from the right side of the pipe, the left side is 8 9/16" from the left side of the pipe and the bottom was a little hard to see but the bottom of the stove is about 1 3/4" from the bottom of the pipe.
Regards,
404