Stratford SC75 design questions.

Re: Stratford SC75 design questions.

PostBy: Millworker On: Wed Feb 11, 2009 10:03 pm

kenny007 wrote:Hello,
I am rebuilding a sc75 stove for next year, I am sealing her up with new gaskets and glass..
does anyone know where i could get a block off (top exhaust) plate ?? I tried to get mine out and broke it!!!! :mad:
Thanks Ken

Ken - I can't tell where you are from based on your profile, but I get all of my Stratford supplies from Dussingers in Lancaster PA.
Millworker
 
Stove/Furnace Make: Startford
Stove/Furnace Model: SC100

Re: Stratford SC75 design questions.

PostBy: kenny007 On: Wed Feb 11, 2009 10:57 pm

Thanks for the info, I will call tommorrow..
Thanks Ken
kenny007
 
Stove/Furnace Make: Stratford, Chappee
Stove/Furnace Model: SC-75

Re: Stratford SC75 design questions.

PostBy: phoule1 On: Tue Feb 17, 2009 12:21 pm

I have a stratford 75 and its interior baffle appears to bend downwards after a while. Has anyone seen this effect and can anyone offer me advice on how to avoid it?
phoule1
 
Stove/Furnace Make: unknown
Stove/Furnace Model: unknown

Visit Hitzer Stoves

Re: Stratford SC75 design questions.

PostBy: Millworker On: Tue Feb 17, 2009 9:19 pm

phoule1 wrote:I have a stratford 75 and its interior baffle appears to bend downwards after a while. Has anyone seen this effect and can anyone offer me advice on how to avoid it?


I am assuming you are talking about this baffle (see picture). When you say it "appears to bend downwards" do you mean it is slipping out of the slots that it hangs from? I can't figure out exactly what you mean - maybe if you post a picture it would help.
Attachments
stove baffle 001.jpg
(788.47 KiB) Viewed 34 times
View: New PagePopup • Select:BBCode
[nepathumb]11240[/nepathumb]
Millworker
 
Stove/Furnace Make: Startford
Stove/Furnace Model: SC100

Re: Stratford SC75 design questions.

PostBy: kenny007 On: Thu Feb 19, 2009 9:39 pm

Hello,
Anyone out there have the round 6 inch plug for the exhaust on the startford sc75 stove??
mine was leaking and i cracked it taking it out, I have tried several places, none avalible!!
Thanks Ken
ps I will try to weld back together
kenny007
 
Stove/Furnace Make: Stratford, Chappee
Stove/Furnace Model: SC-75

Re: Stratford SC75 design questions.

PostBy: NewStove On: Tue May 07, 2013 9:53 pm

Totally new to this. I recently purchased a used Stratford SC75. I don't have any paperwork (stuff like UL rating, BTU, etc..) Without the paperwork...no permit. If anyone can help I'd greatly appreciate it. Thanks
NewStove
 
Stove/Furnace Make: Stratford
Stove/Furnace Model: SC75

Visit Hitzer Stoves